Used Sbc Duo 37 for sale (3,480)

Condition: ready for operation (used), Year of construction: 2019, clamping force: 6,500 kN, screw diameter: 60 mm, overall weight: 6,500 kg, controller manufacturer: ENGEL, This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Oil Reservoir Capacity - Injection Unit: 500 l • Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool • Water Consumption (32°C): 4.80 m3/h Machine Benefits Qualitative Machine Benefits • The machine has electric water batteries (4 e-flomos with 8 circuits each). • The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Machine Benefits • Maximum injection capacity: 890 cm³ • Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 • Reduced torque @ maximum screw speed: 1600 nm • Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • Ld ratio: 24. 0 • Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel • Opening force with pressure pad: 510 kn • Maximum distance between platens: 1750 mm Extra Information Dimensions & Weight • Drop Out Chute Width: 1100 mm • Weight of Clamping Unit: 20,000 kg • Maximum Mold Weight (Moving Platen): 7,330 kg • Maximum Mold Weight (Stationary Platen): 7,330 kg • Maximum Mold Weight (Total): 11,000 kgCycle Data (Euromap 6) • Stroke: 700 mm • Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Main Features • 21.5” full HD touchscreen • USB interface / Ethernet connection • E-move control element • 3 keycards for user login • Graphic symbols for cycle control • Screen languages: German, English • Acoustic error signal / Signal light for error displayPrograms & Monitoring • Power Control: optimizes motor performance during dispensing • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight & viscosity • IQ Weight Control: automatic injection parameter adjustment during fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates • Reinforced clamping plates (FAP & BAP +50 mm each) Gedpfx Aljy D Npcexoub • Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical calotte minimized • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves according to drawing • Plate ejector – Variant A (adapted to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moving platen • 2-fold on fixed platen • 2-fold on moving platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for intermediate core pull position Mold Heating & Cooling • Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) • Temperature monitoring interface (moving & fixed platen) • 4-fold hydraulic mold nozzle control • Separate cooling water connection (tool & machine) • Temperature control unit interface: Engel protocol, 20 mA current loop • 4-way flow regulator (0–10 l/min) • Hose specification: max. 90 °C / 4 bar • Hoses for mold cooling

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216, total width: 4,000 mm, total length: 4,500 mm, total height: 1,150 mm, overall weight: 2,600 kg, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, VSG cutting table M 37 incl. support Cuts from 6-16 mm Pneumatics new, heating lamp new, felt new, machine comes with a service contract! Gsdpfx Asxg Ii Rjlxoub If interested, we can also provide additional pictures and videos.

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: Gsdpfoq A Um Rox Alxjub with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling Gsdoxab Dzjpfx Alxsub scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: used, mileage: 55,900 km, power: 125 kW (169.95 HP), first registration: 11/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,500 mm, loading space width: 2,050 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine type, dimensions, or other specifications? Feel free to contact us. We offer financing and leasing at attractive conditions – also available for the Netherlands, Austria, and for new business start-ups! ---2 units available--- Vehicle details: Wheelbase: 3665 mm * 9G-Tronic automatic transmission * Single cab * Rear axle twin tires * Gross vehicle weight: 3.5 tons Technology/Comfort: * Digital radio (DAB) * “Tempmatic” air conditioning * Cruise control * Extended, electrically adjustable and heated exterior mirrors * Multifunction steering wheel * 71L main tank * Driver's seat armrest * Double passenger seat (total 3 seats) * “Maturin” black fabric upholstery * Pre-installation for electrical, parametrisable special module * Overhead storage shelf above windshield * Rear wall window * Front cupholders * Central locking with remote control * Electric front windows * Outside temperature display * Fuel filter with water separator Safety: * Crosswind Assist * Lane Keeping Assist * Intelligent Tachograph EU pre-installation * Attention Assist * Halogen headlights * Outline marker lights * Side marker lights * Adaptive brake lights * Seatbelt warning device * Jump-start contact Guodpfx Ajyg Tpdolxjb * Hill Start Assist * Hold function * EG underride protection Refrigerated box body: * Reinforced floor with anti-slip surface * Double rear doors with individual lock and 270° opening angle * Side door with individual lock and access step * Combination anchor lashing rail (1 left & 1 right) * Interior and exterior LED lighting * Drain holes in box front * Double sealing system at loading openings * Side underride protection * Wheel protection with mud flaps Cooling unit: * ThermoKing V500X (-20°C) * Cooling operation both while driving and stationary * Temperature recorder (thermograph) * Preparation for dual temperature application Additional extras for the body can be supplied at extra cost. ---Note: Please call briefly before your visit so we can ensure that your desired vehicle is on site. If the vehicle is not in Wachtendonk, we are happy to deliver from our stock. Individual body configurations available on request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing or typographical errors. Errors and interim sale excepted. Best regards, Pimenta Automobile ---2x available---

Condition: good (used), Year of construction: 2019, operating hours: 4,046 h, load capacity: 2,000 kg, lifting height: 1,580 mm, fuel type: electric, mast type: duplex, construction height: 1,280 mm, empty load weight: 1,600 kg, mileage: 4,046 km, Electric ride-on stacker Brand: Still DUO Stacker Year: 2019 Hours: 4,046 Capacity: 2,000 kg Lift height: 1,580 mm Overall height: 1,280 mm Battery: 2019 Equipped with external charger. Guodpfx Asy Apalelxeb

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Working width: 1100 mm Abrasive belt width: 1120 mm Gusdpfxoy E Rt Ee Alxob Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Operating manual Year of manufacture: 2003 New conveyor belt Price

Condition: used, mileage: 420,000 km, power: 228 kW (309.99 HP), first registration: 05/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro3, Year of construction: 2004, Equipment: ABS, crane, fog lights, power mirror, = Additional options and accessories = - Immobilizer - Lift Axle - PTO - Radio CD player Gujdpfsyz Awbsx Alxeb - Toolbox = Remarks = Crane Number of hydraulic extensions: 4 Number of extra functions: 2 Rotator: ✓ MAN TGA 26.310, 2004, 420,000 km Euro 3, 6x2, Air conditioning, HIAB 122 E4, 4x Hydraulically extendable, 2x Extra function (rotator), Tires all around 95%, Like new! = More information = Front axle: Steering Rear axle 1: Double wheels Crane: HIAB 122 E4 Duo = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 42 mm, 37 pieces -Sizes: Ø 2.5 - 18 mm, see photos / parts list Gsdpfx Alsyz Sl Uoxoub -Price/Fee: complete -Transport dimensions: 180/160/H42 mm -Weight: 3.0 kg

Condition: ready for operation (used), Year of construction: 2003, clamping force: 8,000 kN, screw diameter: 90 mm, total width: 3,000 mm, total height: 2,500 mm, overall weight: 44,000 kg, product length (max.): 8,900 mm, Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details. • Shot volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticizing capacity: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle), larger mold space for easier changes, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticizing; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large parts, more compact than traditional tie-bar machines, stable industrial design, easy to automate Gjdpfx Aoy Alwmelxsub Additional equipment • Not specified/included in the provided information

Condition: refurbished (used), Year of construction: 2012, Rotor length: 830 mm Rotor diameter: 360 mm Hopper opening: approx. 830 x 1000 mm Capacity approx. 1 m³ Cutting tools: 40 pieces Motor: 37 kW incl. turbo coupling Extraction nozzle: 200 mm Equipment: Fully refurbished machine - Ecoringen Gjdpfx Aley A Rl Nexeub - 6 months warranty - All key components checked, wear parts replaced - Rotor completely overhauled - Bearings, knives, etc. new Motor replaced in 2022 Newly painted Further technical data available on request

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mm Turning length : 700 mm In General: Max. workpiece diameter:140 mm Chuck diameter:250 mm Max. turning length:700 mm Track I: Tool carrier I:Tool turret (X/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track II: Main spindle (OP10):Travelling direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:772 mm C-axis:0.01° Position sensor (W):Direct scale : Sub-spindle (OP20):Direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:2+2-jaw power chuck Clamping cylinder:Hydraulic clamping cylinder C-axis:0.01° Track III: Tool Carrier II:Tool turret (X/Y/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Y-axis:50 mm mm) Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track IV: Main spindle (OP30):Travelling motor spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:988 mm C-axis:0.01° Position sensor (W):Direct scale : Tailstock:Fixed arrangement Quill:Hydraulic with position control Track V: Tool Carrier III:Milling/turning turret (X/Z) Tool drive:1,000 rpm, 240 Nm Tool holder:HSK-63 Number of stations:5 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Automation: Guodpfx Asy A U I Ielxob Feed conveyor:O-type, 18 base carriers Discharge conveyor:O-type, 18 base carriers Part transfer:3 grippers on tool turret Max. workpiece diameter:140 mm Max. workpiece height:630 mm Workpiece weight:max. 20 kg Equipment: Position measurement systems:Direct (glass scales) Chip removal:Chip conveyor Workpiece measurement:Renishaw OMP Coolant supply:Internal coolant with filter, 17 bar Coolant temperature control:Immersion recooler Emulsion mist separator:Mechanical Software option I:Turning/milling operation Software option II:Automatic retraction Software option II:Sister tool management

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale the BOTTERO laminated glass cutting table with up-date program from 2023 with LamiWin with optimizator Win-Opty Type: 520 LAM/37 Year: 2007 In very good working condition VERY GOOD PRICE ! max. cutting lenght : 3700 mm max. glass thikness : 8+4,56 PVB+8 mm Gjdjy Azmdopfx Alxsub max cutting speed : 100 m/min external dimensions : 5100 x 3900 mm

Condition: used, Year of construction: 2004, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Weight: 21.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem - Power [kW]: 33.5 Guodpfoyvt Dzjx Alxsb - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2018, loading space length: 13,390 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,910 mm, color: white, Year of construction: 2018, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Gsdpfxeyyl Tcs Alxoub Weights Empty weight: 10.040 kg Carrying capacity: 31.960 kg GVW: 42.000 kg Functional Tail lift: Dhollandia DHSMT.30, slider lift, 2500 kg Make of bodywork: VeDeCar Thermo King SLXi Spectrum Cooling engine: diesel and electric (4396 operating hours diesel; 5 electric) Wall thickness: 50 mm Maintenance, history and condition Number of owners: 3 APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), functionality: fully functional, We offer the Vortex D2 Duo – a fully automatic cook, quench & chill machine designed for the continuous and repeatable cooking, quenching, and chilling of food products. This solution features a DUO design, in which the cooking section is mounted on a separate frame from the quenching and chilling sections, ensuring a very high level of separation between high-temperature and low-temperature processes. The Vortex D2 Duo model was developed primarily for processing short and long pasta, but thanks to its versatility, it is also ideal for products such as rice, noodles, legumes, grains, vegetables, potatoes, and seafood. As a result, the machine can operate in both pasta and ready-meal production facilities, as well as in modern convenience food plants and among producers of salads and chilled components. The Vortex D2 Duo has a capacity ranging from approximately 250 kg/h to 4000 kg/h, allowing the system to handle both medium and very high production volumes. The Vortex is equipped with a programmable Vortex water flow system, which ensures uniform cooking, cooling, and chilling of each product batch. This system minimizes clumping, product damage, and yield losses, and its highly efficient cooling typically achieves a product temperature of approximately 3°C. The Vortex D2 Duo can operate with conveyor feeding or with automatic batch loading of product into containers, which facilitates precise control of throughput and process organization. Additionally, vibrating dewatering conveyors enable operation in both batch and continuous modes, allowing the line to be easily adapted to subsequent production stages such as mixing, dosing, packaging, or final cooling. Also noteworthy are design solutions that enhance process quality and hygiene, such as hydraulic basket lifting, shell-and-tube heat exchangers, double degreasing overflows, and specially shaped water tanks. Hygienic, stainless steel construction and washdown-ready protection, which is of great importance in facilities operating under high sanitary standards. Key advantages of the Vortex D2 Duo separate frames for the cooking and cooling sections, high-quality separation of high- and low-temperature processes, ideal for short and long pasta, as well as rice, vegetables, potatoes, grains, pulses, and seafood, capacity up to 4000 kg/h depending on configuration, programmable Vortex water flow system, highly effective product cooling to approximately 3°C, capability for batch and continuous operation, hydraulic basket lifting and efficient drainage, hygienic, industrial design for continuous operation. Guedsy Df Nrepfx Alxeb Vortex D2 Duo is an advanced production line for manufacturers seeking consistent cooking, rapid cooling, high throughput, and excellent final product quality in a modern pasta and convenience food production process

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: Gusdpfx Aeydpxvjlxjb - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, overall weight: 35,000 kg, first registration: 12/2017, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, Equipment: ABS, Schmitz semi-trailer First registration: 12/2017 Multi Temp Double-deck Floral width: 249 cm Internal height: 270 cm Pallet box Tail lift/loading ramp Guedpfoy Acnvsx Alxsb Refrigeration unit: Schmitz Multi Temp Unit: Diesel Std 6900 Phone: We are happy to assist with your financing or leasing EU sale: net price with company documents and VAT number VAT deposit: €2,000 We speak English. We speak Serbo-Croatian. Our service for you: - Customs number plates - Export documents and EUR1 - Worldwide transport - Overnight stay options - Transfer from Munich airport or Passau train station Phone:

Condition: excellent (used), mileage: 20,509 km, first registration: 10/2021, fuel type: electric, axle configuration: 8x4, fuel: electricity, color: grey, driver cabin: day cab, gearing type: automatic, loading space volume: 10 m³, Year of construction: 2021, Equipment: central locking, electric window regulation, onboard computer, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Alloy wheels - Air-suspended seats - PTO (Power Take-Off) - Radio/CD player - Rotating beacon = Further Information = General information Intended use: Construction Applicable material: Concrete Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Weights Unladen weight: 16,792 kg Payload: 20,208 kg Gross vehicle weight: 37,000 kg Functional Superstructure brand: Stetter AM10 FHCBL Number of chambers: 1 Water installation: Yes Hoses: Yes Godpoyhdckofx Alxsub Condition Technical condition: Very good Visual condition: Very good Further information Please contact Maarten van Marion for more information. = Company information = You can find our complete range here:

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours Guodpfxst Hdh Ne Alxsb The compressor is fully functional.

Condition: good (used), Year of construction: 1996, Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm Godpfx Ajyw Sirslxjub -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm -Weight: 277 kg

Condition: used, Rotary vane vacuum pump 2 stages Gjdpfsctlpvsx Alxoub Condition: Inside and outside absolutely as good as new, reconditioned and newly painted Warranty: 12 months Manufacturer: Pfeiffer Type: DUO 120 Motor: 400V DS Operating medium: mineral oil Included: Instruction manual Oil mist separator optional Delivery time: on request Photo will be posted later.

Condition: used, Rotary vane vacuum pump Gedpfx Alscu Tlpjxsub Two-stage Oil lubricated Manufacturer: Pfeiffer Type: DUO 250 Cat.-No.: PK D27 602 / K141 Status: Used (functional!) (A general overhaul is also offered) Suction capacity: approx. 250 m³/h final pressure: > 5x10e-3 mbar Warranty: 12 months (with general overhaul) Included: manual and oil Delivery time: ex works

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Compressor station, soundproof container with 2 compressor units 2 pieces SPX Hankison GmbH, type HHL 450 – a desiccant air dryer for industrial compressed air systems. It is used to remove moisture from compressed air so that machines, valves, or pneumatic systems do not corrode or freeze. SPX Hankison HHL 450 Gedpeyx Tnrjfx Alxoub Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers *

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: GG520A-17518 & GG502S-16471, total width: 5,100 mm, total length: 5,350 mm, total height: 1,500 mm, overall weight: 3,250 kg, type of input current: three-phase, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Maximum measurement: 3210 mm Minimum measurement: 150 mm Maximum cutting length: 3700 mm Minimum cutting length: 250 mm Monolithic: 3–10 mm Laminated: minimum 2+0.38+2 (22-1) maximum 8+4.56+8 (88-12) Guodpfxoycgiis Alxob Maximum glass weight for loading/unloading on arms: 450 kg