Used Sgb Cast Resin Epoxy Transformers - Dry for sale (4,879)

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Hjdpfx Ajy Thw Romgjn Drive power 30 kw

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Hedpfsw Sfptsx Amgen

Condition: used, Year of construction: 2010, machine/vehicle number: 0226, functionality: fully functional, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, The used HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly suitable for use in laboratories or when frequent material changes occur (e.g., small production runs). Hodpfx Amoy Tn Uvsgsn Batch dryer/pre-drying station with integrated absorption dryer, type TLZ 12.1. 6 x 15-liter V2A modules with sliding guide and discharge slide. 3 air filters. Recirculation air cooler. Weekly timer. 6 x red/green traffic lights indicating the end of the drying cycle or a fault at the docking station. Automatic 6-stage air flow control via a frequency converter on the dryer fan. The unit is mobile. Module 10742 - 10746, 10293. Includes a dew point meter for the absorption dryer. For sale to commercial customers only, with no warranty.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets New price currently around €250,000 Hodpfxow Ttxfe Amgon Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight alignment. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in more compact spaces without compromising functionality. The height of the system is fixed. Machine Output: Output capacity is approximately 500 kg per hour. Bag Dimensions and Weight: The bag sizes can be fully customized to your requirements. Options range from small bags of approximately 5 grams to larger bags of 20 kg or even 40 kg. Adjustments can be made flexibly to suit your production demands. Buffer Tank: The buffer tank has a capacity of 20 kg. Maintenance Costs: Average annual maintenance costs, excluding materials and call-out charges, are between €1,200 and €1,500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing & packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, second-hand dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice

Condition: excellent (used), Year of construction: 2019, operating hours: 5,300 h, functionality: fully functional, overall weight: 345 kg, type of input current: three-phase, Equipment: documentation/manual, This machine has been fully overhauled by ASCO. The machine is ready for immediate operation. The service report is included. Extruder plate 3mm Extruder plate 16mm Other sizes available on request. Worldwide shipping. ASCO Pelletizer A120P-D3, ASCO dry ice pelletizer, dry ice pelletizer for sale, dry ice pelletizer for sale, dry ice pellet machine for sale, dry ice production machine, dry ice pellet making machine, dry ice pellets 3mm, dry ice pellets 6mm, dry ice pellets 10mm, dry ice pellets 16mm, industrial dry ice production, cryogenic pelletizer, CO2 pelletizer machine, dry ice extruder, high quality dry ice pellets, ASCO pelletizer 120P, ASCO pelletizer A120P, ASCO A120P D3 pelletizer, dry ice pelletizer Netherlands, dry ice production machine, second-hand dry ice pelletizer, used dry ice pelletizer, refurbished dry ice pelletizer, industrial dry ice equipment, CO2 pellet machine, dry ice machining, pelletizing dry ice, ASCO CO2 pellet machine, pelletizer 120 kg/h, dry ice pellet production system, dry ice supply equipment, cryogenic pellet production, liquid CO2 pelletizer, PLC controlled pelletizer, automatic dry ice pellet machine, pelletizer Noordwijkerhout, DrDryice, export dry ice pelletizer, industrial dry ice supply, dry ice storage and production. Hedpfxoyh I S Te Amgon Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: ready for operation (used), operating hours: 2,880 h, functionality: fully functional, DrDryice The C500 is an older model, but it has proven to be a strong, durable, and reliable workhorse. Engineered with robust industrial construction, this machine continues to deliver consistent performance and is ideal for companies seeking a low-investment solution for dry ice pellet production. Machine hours: 2,880 h Hsdpfjyxxgaox Amgsn •⁠ ⁠Includes 3 mm die plate •⁠ ⁠Minimum production capacity: 100 kg/h •⁠ ⁠Solid, heavy-duty construction •⁠ ⁠Proven reliability Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Hedpfxoy R I Uqj Amgen Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection.

Condition: used, Evaporator GEA KUBA -Type: SGB 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -We have 10 pcs with electric heaters and 7 pcs without heaters -Fans: 2 x 630 mm -Dimensions: 3020 x 850 x 1000 mm -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 17 -Stock number: CH 599 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work Hsdpfx Amoy Endzsgen

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Hodpfxsdzqq Uo Amgjn Length 2000 mm Width 1200 mm Thickness 150 mm Working height 800 mm Panel thickness 35 mm - Substructure made of solid wood Weight approx. 950 kg Good surface

Condition: used, Heavy-duty straightening and welding plate, steel and grey cast iron, heavily ribbed formerly a marking and measuring plate heavy straightening plate Hodpfxju Inwfe Amgjn length 2000 mm width 1000 mm thickness 160 mm working height 850 mm plate thickness approx. 35 mm throughout - 3 height-adjustable feet weight with feet 680 kg good condition

Condition: used, Straightening and welding plate, cast steel / grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 1985 mm Width: 1000 mm Thickness with ribs: 220 mm Working height: 860 mm Plate thickness: approx. 35 mm throughout Hsdpfxokpwuxs Amgon - 4 height-adjustable feet Weight: 1050 kg

Condition: used, Straightening and welding plate, cast steel and gray cast iron, heavily ribbed Cast plate, heavy straightening plate Length 1500 mm Hsdpfxorl U Sws Amgen Width 1000 mm Thickness 100 mm Continuous plate thickness approx. 37 mm Table height 860 mm - Table base made of steel (custom-made) Weight 640 kg Good condition

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Hodpfxey Tiaas Amgen Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: used, Year of construction: 1994, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 10.3 meters Width: 4.2 meters Height: 4.15 meters Internal dimensions: Length: 10.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1994 Inlet temperature: 95 degrees Hodpoy Tt Eaefx Amgen Fans: 7 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Year of construction: 1995, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 13.3 meters Width: 4.2 meters Hjdpfx Aey Tt Axemgsn Height: 4.15 meters Internal dimensions: Length: 13.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1995 Heating capacity: 205 kW Supply temperature: 90 degrees Water flow rate: 16 m3/h Fans: 9 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Height: 350mm Hedpfxjxdwwfo Amgsn No. Of T-slots: 5 Distance from T to T-slot / Jump:300mm T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Length: 5100mm Width: 1500mm Height: 350mm

Year of construction: 2016, condition: excellent (used), Painting booth Diana serie with horizontal ventilation Modern technology: Dust free operation Hodpfx Aeygum Remgon paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Width:6000mm Height:6000mm

Condition: used, The device is in good working order and ready for use; it can be used to dry fruits or vegetables after washing. Hedpfxjy Uaxie Amgen Length: 6000 mm Working width: 700 mm Overall width: 950 mm Height: 900 - 1300 mm Please check out my other listings.

Condition: used, Year of construction: 2004, Force Presscylinder: 4000 KN Steel, Gush: 4-6 to/h Aluminium: 3-4 to/h Driving Power: 1x22 kW Arrangement Surface 7x4, 2x4, 1 mxm Machnie weight: 23 to Hjdpfx Amolhqc Negjn Place: Austria Available immediately

Condition: used, Length 3.500 mm Depth 1.000 mm Height 2.000 mm ca. 700 kg Sturdy Lübbers paint drying trolley with adjustable center rake. Hjdpfxsw I Syks Amgon Available: 15 units Price per unit: € 490.00 + VAT.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Hedpfx Ameyg H Dzjgon Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Hjdpfjfzb Nbox Amgen Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Hodjfzb Nispfx Amgon 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Hsdpefz U Hvsfx Amgjn Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 Hsdpfx Asy Ragfsmgjn - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps