Used Sicar Brava 350/3 for sale (66,662)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel Godpex Rq Slefx Afujbu "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. Gbodpfx Afsyrhu Seuou • Adjustable water cooling • Cutting pressure regulator

Condition: good (used), Year of construction: 2015, Affeldt AVN E 350 D vertical flowpacker Automatic filling and closing machine for pillow bag. Closes the film with heat seal for (flat) pillow bags PP filmFilmholder up to 75 cmFall pipe circumference 44 cm.12,5 øMachine is suitable for printed filmDynacode printer Year: 2015Excluding discharge conveyor Gbedpfxoz Rbl Eo Afusu The tubular bag machine AVN E350 D is easy to integrate in existing facilities based on its slightly utility space and low height and additionally its optional range of packaging charges leads to a versatile usage of the machine. The AVN E350 D packs previously weighed or counted citrus fruits, onions, tomatoes, potatoes and similar products with effective output into bags. The menu-driven operating dialogue via touch panel, the free programmable control as well as the memory for different programs ensure an easy operation. The machines have been disassembled, we've made video's of the machines while in operation. The condition is used, but in good working condition. The machines will not be delivered refurbished. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Gbedpfez Nxwcjx Afuju Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: good (used), Year of construction: 2016, Affeldt AVN E 350 D vertical flowpacker Automatic filling and closing machine for pillow bag. Closes the film with heat seal for (flat) pillow bags PP film Filmholder Up to 75 cmFall pipe circumference approx 50 cm. 13,5 øMachine is suitable for printed filmDynacode printer Year: 2015Excluding discharge conveyor The tubular bag machine AVN E350 D is easy to integrate in existing facilities based on its slightly utility space and low height and additionally its optional range of packaging charges leads to a versatile usage of the machine. The AVN E350 D packs previously weighed or counted citrus fruits, onions, tomatoes, potatoes and similar products with effective output into bags. The menu-driven operating dialogue via touch panel, the free programmable control as well as the memory for different programs ensure an easy operation. The machines have been disassembled, we've made video's of the machines while in operation. The condition is used, but in good working condition. The machines will not be delivered refurbished. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Gjdpfx Afez Rcadoujbu See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2007, The Ulma PV 350 flow packaging machine is designed for the packaging of loose difficult, delicate, and wet products. As leeks, carrots with leafs, herbs, peppers, eggplant and Chinese cabbage. This machine is completely checked and serviced by engineer. Infeed belt 450 x 30 cmBoxmotion sealing bar Top sealerSuitable for perforated transparent / (un)printed filmAutomatic product length sensorPneumatic opening of sealing rollsDigitally adjustable sealing temperatureSelf-centring adjustable folding boxElectronic speed controlTemperature control for sealing bar and rollersBuilt in accordance with European directives / CE markingWith extra film roll holder More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Godjz Rhh Hspfx Afusbu Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, machine/vehicle number: 008555, Type of edging: Thin edge, Thick edge Gedpfx Asz N Swvjfusbu Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 50 mm Operating Units: 6 nr

Condition: used, Year of construction: 1995, saw blade diameter 350 mm cutting diameter 120 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm Gbodpfszmy E Dsx Afuou capacity 45 degrees: flat 95 x 100 mm turning speeds 34 / 88 U/min total power requirement 0,75/1,5 kW weight of the machine ca. 340 kg. dimensions of the machine ca. 0,7 x 1,0 x 1,85 m Features: - Coolant system - Replacement saw blades

Condition: used, all stainless steel completely isolated infeed conveyor outfeed conveyor Gbjdpfx Ajz Rnzmsfuou belt width ± 1.350 mm 3 tiers from 6.000 mm adjustable speed suitable for thermal oil heating

Condition: ready for operation (used), functionality: fully functional, Manual feed of the cutting head Disc diameter 350 mm 3000 rpm Cutting angle adjustment -45/+45 degrees Pneumatic clamping Cutting process initiated with two buttons Safety switch Minimum air pressure 6 bar Year of manufacture 1995 400V Gedpjz E Dy Hefx Afusbu

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, plate length: 663 mm, plate height: 680 mm, total length: 4,570 mm, total width: 1,500 mm, total height: 2,130 mm, overall weight: 4,800 kg, Equipment: documentation/manual, Wittmann Battenfeld EcoPower 110-350 Stock No.: 503665 Manufacturer: Wittmann Battenfeld Type: EcoPower 110-350 Control: UNILOG B6P Year of Manufacture: 2014 Operating Hours: 56851 h Technical Data – Clamping Unit Clamping Force: 1100 kN Tie Bar Spacing h x v: 470 x 420 mm Platen Size h x v: 680 x 663 mm Minimum Mold Height: 200 mm Maximum Mold Height: 450 mm Gedpfx Afsz A Dwmeuobu Maximum Mold Opening: 830 mm Opening Stroke: 380 mm Technical Data – Injection Unit Screw Diameter: 25 mm Injection Volume: 86 ccm Injection Pressure: 3000 bar Plasticizing Rate: 9 g/s PS Free Injection Flow Rate: 98 g/s PS Dimensions & Weight Machine Dimensions L x W x H: 4.57m x 1.5m x 2.13m Total Weight: 4800 kg Equipment Screen Text – German Screen Text – Multi-Language CEE Socket 16A Machine with Water Manifold Leveling Elements

Condition: good (used), Year of construction: 2007, The Ulma PV 350 flow packaging machine is designed for the packaging of loose difficult, delicate, and wet products. As leeks, carrots with leafs, herbs, peppers, eggplant and Chinese cabbage. This machine is completely checked and serviced by engineer. Infeed belt 450 x 28 cmBoxmotion sealing bar Top sealerSuitable for perforated transparent / (un)printed filmAutomatic product length sensorPneumatic opening of sealing rollsDigitally adjustable sealing temperatureSelf-centring adjustable folding boxElectronic speed controlTemperature control for sealing bar and rollersBuilt in accordance with European directives / CE markingWith extra film roll holder More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Gbedpjz Rfvzsfx Afusu Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 976 mm, total width: 686 mm, total length: 1,152 mm, input voltage: 400 V, overall weight: 128 kg, type of cooling: water, welding current at 100% duty cycle: 350 A, input current: 24 A, welding current (min.): 5 A, welding current (max.): 350 A, input frequency: 60 Hz, Equipment: head guard, The EWM Tetrix XQ 350 puls AC/DC W EX 8P is a modern TIG welding machine designed for professional applications. This machine combines high efficiency, advanced welding functions, and energy-saving technology, making it an excellent choice for demanding professional welding tasks. * Energy savings thanks to high efficiency and standby mode. * Next-generation TIG AC/DC inverter welding machine. * Expert 3.0 control system with a 7-inch high-resolution display. * Welding processes and functions: Gbsdpfoz Iltysx Afusu * TIG AC/DC * TIG DC * TIG Pulse * activArc® * spotArc® * MMA * MMA Pulse * MMA CEL * MMA CEL Pulse * Compatible with remote control units and functional welding torches. * flexFit housing system allowing a wide range of accessories to be attached. * LED information bar indicating the current operating status. * IP23 protection class. * Automatic temperature-controlled cooling fan, reducing contamination and noise by operating only when required. * Tool-free welding polarity reversal. * Connectivity to the ewm Xnet software via LAN or Wi-Fi. * Earth fault monitoring with PE protection. * PC interface for PC300 XQ software. * High-performance 1500 W water-cooling system, high-performance centrifugal pump, and 8-liter coolant tank ensure excellent torch cooling.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Godpfx Aorfw Ikofusbu Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g Godpfsrthkusx Afusbu New temperature control board ARB 777 (cost 2.750€)

Condition: excellent (used), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt burner gas or oil possible Godpfx Afom Rhdysujbu

Condition: like new (used), Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 120 mm, cutting range square steel at 45°: 120,100 mm, cutting range square steel at 90°: 170,100 mm, rotational speed (min.): 17 rpm, For sale: 1 used vertical metal circular saw Manufacturer: Eisele Behringer Model: VMS 350 Year of manufacture: 2026 Technical data: TECHNICAL DATA: * Cutting range, round: 120mm, square 120x100mm (45 degrees) and 170 x 100mm (90 degrees) * Drive power: 2.1 KW / 400 V / 50 Hz * Saw blade diameter: 350mm * Includes coolant pump Further data can be found in the attached photos from the documentation. The machine comes with a feed roller conveyor, length stop, documentation, coolant, and three saw blades (two of which are still in their original packaging and are new). The machine can be viewed in our warehouse in 09599 Freiberg. Gsdpfx Asz Hwa Aefuebu

Condition: good (used), mileage: 797,929 km, power: 257 kW (349.42 HP), first registration: 12/1976, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,400 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, permissible axle load (axle 1): 6,500 kg, permissible axle load (axle 2): 17,500 kg, Year of construction: 1976, Scania LB140 V8 350 HP 6x2 Oldtimer - Perfect condition - Privately owned/No VAT MY: 30-12-1976 KM: 797,929 VIN: 497936 Perfect condition Clean interior and exterior Vertical exhaust stack 6x2 with bogie axle Custom bumper Leather interior Godpsvdyamjfx Afujbu = Additional Information = Technical Information Number of cylinders: 8 Gross vehicle weight: 23,500 kg Axle configuration Suspension: Leaf spring Front axle: Tire size: 315/80R22.5; Max. axle load: 6,500 kg; Steering axle; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Dual tyres; Max. axle load: 17,500 kg; Left inside tire tread: 80%; Left outside tire tread: 80%; Right inside tire tread: 80%; Right outside tire tread: 80% Rear axle 2: Dual tyres; Lift axle; Left inside tire tread: 80%; Left outside tire tread: 80%; Right inside tire tread: 80%; Right outside tire tread: 80% Environment Emission standard: Euro 0 Condition Technical condition: good Visual condition: good Further information Contact VAEX The Truck Traders for more information.

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm Gjdpfxeyy A Hyo Afujbu capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: used, machine/vehicle number: 007956, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/11/A3/WZ14 Position 2: Single Edgebanders HOMAG-PROFI KFL 350/11/A3/WZ14 Gedpfx Aewuudmofuobu Position 3: Panel Return Systems HOMAG-PROFI KFL 350/11/A3/WZ14

Condition: used, functionality: fully functional, ADJUSTABLE ANGLE BEVELER 250x4, FCT SC-250, USED 'CE'. Refurbished, ready in stock. Gbedpfxjzh E Ite Afuju

Condition: used, Euromac PB 350S Horizontal bending machines Euromac horizontal bending machine. with related equipment. serial number 90/52901/12, Oct 1990. With large amount of tooling as shown in images below. Gbsdszh Rf Dopfx Afuou

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086 Gedpfx Aoxabzyjfujbu

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 Gsdpfx Afozqglljusbu - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Gbodpez A Ubijfx Afueu Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet