Used Single Column Press - Hydraulic for sale (37,165)

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Iiodpfxjz Alg Se Ag Aoh Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Condition: new, machine/vehicle number: DF0189, pressing force: 500 t, pressure:500 t passage width:1200 mm stroke:400 mm weight of the machine ca.:40 t dimensions:2800 x 1750 x 4350 mm Iiodpfsfxykaox Ag Ash return capacity:50 t :50 kW Max Working height:800 mm :0 - 10 mm :0 - 10 mm/sec. :400 mm pestle plate:1000 x 1000 mm table plate:1200 x 1200 table height over floor:1200 mm :700 l

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm Isdpfxelp U A Is Ag Asih

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm Iodpfx Aged R Szuo Ajih total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1984, pressure 100 t throat 320 mm stroke 138 mm table surface area 850 x 550 mm dayligth 385 mm oil volume ca. 500 l ram surface 560 x 450 mm total power requirement 30 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 1,5 x 2,0 x 3,0 m - Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and trunnion clamping piece Iijdst Dctropfx Ag Aeh - Conversion of hydraulics to proportional valve - Conversion of switch cabinet - Electrical travel measurement, Siemens Soft-Start, touch panel The following work was carried out in-house: - Machine was technically inspected - Machine was repainted - Before delivery, a current UVV test with braking time measurement is carried out Machine is safe for manual insertion work on the open mold

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Iedpfxjz A R Ire Ag Aoih Weight: approx. 5 tons Good condition

Year of construction: 1990, condition: used, pressure 100 t throat 260 mm stroke 300 mm table-size 500 x 500 mm ram head dimension 650 x 500 mm dayligth 700 mm oil volume 600 l capacity of ejector in table 40 t return capacity 13 t total power requirement 22 kW weight of the machine ca. 7 t dimensions of the machine ca. 2.07 x 2.48 x 3.3 m Isdpfxjb U Hvaj Ag Aoih - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Ijdpoz D Hzdsfx Ag Aeih

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Iijdpfsyupulsx Ag Aeh Weight: approx. 13 tons Very good condition, as new

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Iisdpsvyirksfx Ag Ash

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Iisdjxz Hfmspfx Ag Ajh Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible. Iisdpfsz R Uxasx Ag Aoh

Condition: used, Year of construction: 1979, pressure:63 t throat:315 mm stroke:200 mm power capacity:15 kW piston stroke:200 mm :450 mm table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min return speed:210 mm/sec total height over floor:2500 mm length in width:1000 mm Iedpfx Aocxxmkog Aoih depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Iiodov Uraaepfx Ag Ajh Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Iijdpfx Aelyr Adeg Ajh

Condition: new, Year of construction: 2025, pressing force: 20 t, Forging Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Press – Table 500 × 600 mm For sale is a compact single-column forging press (C-frame) from the manufacturer Durendus, model DCS-20, with an adjustable pressing force of 5 to 20 t. This machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, high traverse speeds, and is ideally suited for small-scale forging, forming, and assembly work. ===== Technical Data & Information: Forging Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,450 × 1,500 × 2,400 mm ==== Working Area - Max. installation height: 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or as per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 90 mm - Piston rod diameter: Ø 60 mm - Rapid traverse cylinder: Ø 40 mm - Rapid traverse piston rod: Ø 25 mm - Operating pressure: max. 250 bar (adjustable) ==== Speeds - Return speed: 140 mm/s - Idle speed: 140 mm/s - Pressing speed: 4 – 10 mm/s (adjustable) - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 22 l/min - Motor power: 7.5 kW - Oil tank capacity: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic power unit: mounted at the upper rear ==== Electrical - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 10 kW ===== Forging, forming technology, assembly work, small batch production, workshop applications, metalworking Iijdpfeyght Rex Ag Ash Forging press, single-column press, C-frame press, hydraulic press, forming press, workshop press, small press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machine guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our key strengths are special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are predominantly equipped with components from leading European manufacturers.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum distance from mounting surface to slide: 1.350 mm Minimum shut height: 250 mm Power requirement: 55 kW Tank capacity: 1.200 l Iiedpfx Aoz S H U Ueg Aoh Total weight: 55.000 kg Press height: 5.800 mm

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t Iedpsx Uru Nofx Ag Aoih dimensions of the machine ca. 2,8 x 3 x 4,5 m

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Iiedpfxolc N R De Ag Ajh

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: - Pressing force 10 t Iisdsktg Dhspfx Ag Aeh - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 20 t, Single-column press – Manufacturer: Durendus – 3–20 t hydraulic press – Table 1000 × 400 mm For sale is a hydraulic single-column press (C-frame) from Durendus with an adjustable pressing force of 3 to 20 t. This compact and robust machine is ideal for assembly, pressing, and light forming operations in the workshop and production environments. ==== Technical data & Information: Hydraulic Single-Column Press – 3–20 t ==== General Information - Manufacturer: Durendus - Model: assembly press / single-column press - Design: C-frame press - Pressing force: 3 – 20 t (adjustable) - Machine weight: approx. 1,200 kg - Paintwork: RAL 7035 (light grey) / RAL 2009 (orange) ==== Working Area - Max. distance table – ram: 500 mm - Stroke / travel: 500 mm - Table height: 940 mm ==== Table & Ram - Table plate: 1,000 × 400 × 40 mm - Ram: Ø 250 mm, round, interchangeable ==== Speeds - Downstroke speed: 2 – 10 mm/s (adjustable) - Upstroke speed: 20 mm/s ==== Hydraulics - Motor power: 2.2 kW - Oil tank capacity: 60 l - Pump: Agro-Hytos or equivalent ==== Equipment & Operation Ijdpjx Ap Utefx Ag Aeih - Pressure adjustment via rotary knob - Robust machine frame - Control cabinet technology from renowned manufacturers - Emergency stop ==== Documentation & Delivery - CE declaration - German-language documentation - Installation, commissioning, and training available at extra charge ===== Assembly work, pressing operations, workshop applications, small series production, light forming operations Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die set-up press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our major strength is in special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses are equipped mainly with components from leading European manufacturers.

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Isdpfxsy Tpr As Ag Ajih Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, Year of construction: 1969, Technical details: Iiodpfexu Dwmjx Ag Ash pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 Ijdpfx Agou N A Uuj Asih throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Iodelc N Ryjpfx Ag Asih