Used Snorkel Tm 12 Mast Lift for sale (40,377)

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 385 mm -Total length: retracted 683 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 9 pieces -Price: per piece Blsdefrzrpepfx Amzek -Dimensions: 683/145/H270 mm -Weight: 41 kg/piece

Condition: good (used), Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms Bjdpfx Aoiy R Udsmzslk -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV70290 -Stroke: 290 mm -Piston rod: Ø 50 mm -Pipe Ø outside: 135 mm -Hole diameter 50 mm / hole spacing 530 mm Blsdpfx Amevumiijzsk -Dimensions: 610/145/H240 mm -Weight: 38 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 302 mm Blsdpofrpntofx Amzsk -Total length: retracted 640 mm -Mount: Bore Ø 40 mm -Quantity: 2 pieces -Price: per piece -Dimensions: 640/145/H210 mm -Weight: 38 kg/piece

Condition: used, fuel type: electric, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder with control valve stroke 280 mm -Type designation: D120050AAV60330 T28 -Piston rod: Ø 50 mm Bedeiy R Upopfx Amzelk -Recording. Ø 40mm -Dimensions: 615/145/H230 mm -Weight: 40 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV90185 -Stroke: 185 mm Blsdpfev Ngq Nex Amzjk -Piston rod: Ø 50 mm -Hole diameter 40 mm / hole spacing retracted 415 mm -Dimensions: 485/160/H145 mm -Weight: 29.1 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 180 mm -Piston rod: Ø 125 mm -Pipe outer diameter: 210 mm -Stroke: approx. 350 mm -Pressure force at 180 bar: approx. 45 tons -Total length when retracted: 860 mm Blsdpfscgtyqox Amzsk -Hole diameter: Ø 65 mm -Ideal for building a hydraulic press -Number: 2 cylinders available -Price: per piece -Dimensions: 200/280/H860 mm -Weight: 150 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 620 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 8x available -Price: per piece Blodpfx Ameb A Ta Sjzek -Weight: 35 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm Bjdpfjfrpn Nox Amzjlk -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg

Condition: excellent (used), Year of construction: 2013, We offer a used KROMA GUTMASTER 1200 mackerel gutting and injecting line from 2013. This industrial processing line is designed for the automatic gutting, cleaning, waste extraction, and brine injection of mackerel in fish processing plants. The machine is suitable for fish weighing 200–500 g and combines several operations in one continuous workflow. The fish is manually placed in special conveyor pockets, head-first and belly-up. As it moves through the line, the machine measures the fish and automatically adjusts the knives to its size. The system opens the belly, separates the gills, removes the entrails using the VACMASTER 200 vacuum system, cleans the inside of the fish, removes kidney blood, and then transfers the product to the brine injection section. The line is equipped with the BRINEMASTER automatic brining module, located directly after the cleaning section. A special injection head with 50 needles, each 2 mm in diameter, injects brine into the fish. After brining, the product is transported by conveyor to an inspection table or directly into containers. The KROMA GUTMASTER 1200 is made of acid-resistant materials and AISI 304 stainless steel, ensuring durability, hygiene, and resistance to demanding production environments. The machine is also equipped with CIP and CWS cleaning systems, helping to reduce cleaning time and improve sanitary working conditions. If there is no fish in a conveyor pocket, the working units are automatically deactivated, which reduces wear and energy consumption. Technical specifications: Bledezkizvepfx Amzek Manufacturer: KROMA Model: GUTMASTER 1200 Year of manufacture: 2013 Application: mackerel gutting, cleaning, and brine injection Fish size: 200–500 g Capacity without brine injection: up to 50 pcs/min Capacity with brine injection: up to 35 pcs/min Total power: 8 kW Control: microprocessor-based PLC Vacmaster 200: automatic vacuum gut-removal system Brinemaster: 50 needles, 2 mm diameter Outfeed conveyor: yes CWS cleaning system: yes CIP cleaning system: yes Basic spare parts kit: included in the price Operating staff: 2–3 people Weight: approx. 1000 kg Dimensions: 5100 / 6100 mm with conveyor x 600 x 1600 mm Main advantages: automatic gutting, cleaning, and brine injection in one line, high capacity of up to 50 fish/min without brining and up to 35 fish/min with brining, suitable for mackerel weighing 200–500 g, VACMASTER 200 vacuum system for entrail removal, BRINEMASTER brine injector with 50 needles, stainless steel and acid-resistant construction, CIP and CWS cleaning systems, PLC control, basic spare parts included in the machine price.

Condition: excellent (used), Year of construction: 2017, operating hours: 465 h, machine/vehicle number: 193189, load capacity: 500 kg, overall weight: 7,985 kg, construction height: 2,650 mm, product width (max.): 1,200 mm, working height: 19,000 mm, enginetype: Electric, manufacturer: Holland-Lift Bledpfx Aozhqp Nsmzek

Condition: used, Holland Lift HL-190 E12 Scissor Lift - Used 🧰 Product Features • Manufacturer: Holland Lift • Condition: used, see photos • Color: blue / green • Year of manufacture: 04.2021 • Operating hours: 299 h • Working height: max. 18.5 m • Transport height: 3.18 m • External dimensions: 3.74 x 1.2 x 3.4 m • Load capacity: 500 kg • Weight: 8,400 kg • Type: Scissor lift • Equipment: Work platform 💰 Price € 16,900,- net, excluding VAT • Quantity discounts: upon request Bledpfx Aeyy I S Uomzsk • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible by appointment We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking to buy high-quality warehouse racking? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse equipment in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of warehouse platforms & steel structures available immediately • 30–50 semi-trailers of goods handled weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: purchase of merchandise, equipment & complete warehouse stocks including complete clearance. 2. Commission auction: carrying out auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling, and complete handover. Whether you have found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes Bedpok Unitjfx Amzslk 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, Bjdoi Riytepfx Amzslk running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 750 kg Please contact Gebrauchtgeräte Center for more information Bedezfkvdspfx Amzolk

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 500 kg Bljdpfx Aezfkb Tjmzok Please contact Gebrauchtgeräte Center for more information

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2451608, power: 16 kW (21.75 HP), load capacity: 600 kg, mast type: telescopic, lifting height: 19,600 mm, platform length: 3,980 mm, platform width: 1,190 mm, overall weight: 9,360 kg, transport length: 4,490 mm, transport width: 1,200 mm, transport height: 3,470 mm, fuel type: electric, color: red, Equipment: UVV, Technical specifications Year of manufacture: 2019 Engine: Electric Working height: 19.50 m Bljdpfx Amjyqy Dcozsk Platform height: 17.50 m Platform dimensions (L x W): 3.98 m x 1.19 m Platform extension: 1.50 m Lifting capacity: 600 kg Overall dimensions (L x W x H): 4.49 m x 1.20 m x 3.47 m Steering angle: 90° Turning radius: 3.98 m Total weight: 9,750 kg Max. climbing ability: 25% Engine power: 16 kW, 48 V Fully functional, with general signs of use

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2451478, power: 48 kW (65.26 HP), load capacity: 450 kg, mast type: telescopic, lifting height: 20,500 mm, platform length: 3,980 mm, platform width: 1,190 mm, overall weight: 10,290 kg, transport length: 4,490 mm, transport width: 1,200 mm, transport height: 2,560 mm, fuel type: electric, color: green, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2020 Motor: Electric Working height: 22.50 m Platform height: 20.50 m Bsdeyqzluopfx Amzjlk Platform dimensions (L x W): 3.98 m x 1.19 m Platform extension: 1.50 m Lifting capacity: 450 kg Overall dimensions (L x W x H): 4.49 m x 1.20 m x 3.71 m Steering angle: 90° Turning radius: 3.98 m Total weight: 10,290 kg Max. gradeability: 25% Motor output: 16 kW, 48 V Fully functional, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2451438, power: 16 kW (21.75 HP), load capacity: 450 kg, mast type: telescopic, lifting height: 22,500 mm, platform length: 3,980 mm, platform width: 1,190 mm, overall weight: 10,290 kg, transport length: 4,490 mm, transport width: 1,200 mm, transport height: 2,910 mm, fuel type: electric, color: red, Equipment: UVV, Technical Data Year of manufacture: 2019 Engine: Electric Working height: 22.50 m Platform height: 20.50 m Platform dimensions (L x W): 3.98 m x 1.19 m Platform extension: 1.50 m Lifting capacity: 450 kg Overall dimensions (L x W x H): 4.49 m x 1.20 m x 3.71 m Steering angle: 90° Turning radius: 3.98 m Bodpfsyqy Dijx Amzolk Total weight: 10,290 kg Max. gradeability: 25% Engine power: 16 kW, 48 V Fully functional, with general signs of use

Condition: used, Year of construction: 2019, color: white, - Aerial Work Platform: Versalift ETL-32-125, 1 person / max. 120 kg, working height approx. 12 m, operation possible from the basket and via remote control, 391 operating hours. Airbag: driver's side, ABS with EBD and brake assist, ESP with ASR, outside temperature display, heat-insulating glazing, tachometer, electric front windows, height-adjustable headrests (3), exterior mirrors electrically adjustable and heated, 6-speed manual transmission, power steering, 2 x 12V sockets in the front, 180 A alternator, mini wheel covers, wheels: 16" steel rims, storage compartments in the front doors, storage shelf above the windshield, ashtray & cigarette lighter, three-point seat belts on all seats, cup holders, lockable glove compartment, height-adjustable steering wheel, pollen filter, upholstery: fabric, driver's seat height-adjustable, solid paintwork, self-cleaning particulate filter, shift point indicator, electronic immobiliser, central locking with remote control, passenger double bench seat, built-in tool shelving. We are happy to make you an offer for trading in your used vehicle. If you wish to lease or finance your vehicle, we will gladly provide you with an individual offer. Subject to errors and prior sale. Mr. Rudolph and Mr. Seidel will be happy to assist you by phone at: . - Central locking, power steering, ABS, ESP, particulate filter, partition wall Blsdpfx Amoyfp Ndszek Cab: local distribution = Further information = Mileage: 138,900 km Unladen weight: 3,500 kg For further information, please contact Tobias Ebert.

Condition: good (used), Year of construction: 2014, operating hours: 844 h, lifting height: 10,500 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 4.290 kg Functional Lifting capacity: 650 kg Working height: 1.250 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Bedpfszg Ahuex Amzolk Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H): 3,50 m / 1,55 m / 2,90 m Surface type: Slab Additional information Please contact Tobias Mayr for more information

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 500 kg Please contact Gebrauchtgeräte Center for more information Bodpfxezf A Aij Amzslk

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 500 kg Bledpfezfn I Dox Amzjk Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2016, fuel type: electric, Lifting capacity: 500 kg Please contact Gebrauchtgeräte Center for more information Bsdpfx Aozflifemzslk

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 500 kg Blodpfxszfl Sgs Amzjk Please contact Gebrauchtgeräte Center for more information