Used Standard 13,4 To/Hr X 14 Bar for sale (84,012)

Year of construction: 1994, condition: ready for operation (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen Ncodpfjlx Azyox Abzew type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1994 1 pipe set blind equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings

Year of construction: 1994, condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm capacity max : 2.000 kg/h Ncsdpfsikvdiex Abzew max. allow. working pressure : 10 bar so far operated with : 5,0 bar water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing fine and coarse fittings.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Nedpfx Abswra S Rjzscw Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Nedpewra Ewsfx Abzecw Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings. Nedsi E Hztopfx Abzscw

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW Ncedjikvdqjpfx Abzew working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Year of construction: 1991, condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings. Njdpfx Aji E Hz Tebzjcw

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen Ncjdonp Hwkepfx Abzow type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Condition: good (used), Year of construction: 2018, operating hours: 461 h, lifting height: 12,000 mm, fuel type: electric, color: green, Weights Empty weight: 3.365 kg Functional Lifting capacity: 400 kg Working height: 1.400 cm Dimensions of cargo space: 240 x 120 x 262 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Latest inspection: 2024-09-25 Production country: IT Nodjw Slm Ejpfx Abzscw Additional information Please contact Vink Machinery for more information Airo X14 EW * 2018 * 461 working hours * Battery powered * 14 meter working height * 400 kg lifting capacity * 3365 net weight * Including documents

Condition: good (used), Year of construction: 2018, operating hours: 432 h, fuel type: electric, color: green, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 3.365 kg Functional Lifting capacity: 400 kg Working height: 1.400 cm Dimensions of cargo space: 240 x 120 x 262 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Latest inspection: 2024-10-23 Production country: IT Surface type: Slab Additional information Please contact Vink Machinery for more information Ncodpfx Asxn T Sajbzew Airo X14 EW * 2018 * 432 working hours * Battery powered * 14 meter working height * 400 kg lifting capacity * 3365 net weight * Including documents

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Nsdpfoxqr E Dsx Abzscw

Condition: excellent (used), Standard boiler Duisburg 10000kg/h 15,7 Bar +Weishaupt gas burner. Already dismantled ,Ready for collection Ncjdpfenwit Sex Abzow

Condition: used, power: 419 kW (569.68 HP), axle configuration: 6x6, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 67,500 mm, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, - Brake system Iveco X-Way AS300X57 Z/P HR ON+ Short Timber Truck, axle configuration 6X4 (with hydraulically driven front axle 6x6), tandem medium drive axle (HR), disc brakes, cab version Active Space, large driver's cab, rear air suspension, 12-speed automated HiTroniX transmission, engine 570 C13 Cursor 13 570 HP Euro VI, wheelbase 4,800 mm, AS cab with high roof, roof insulation for cab, electrically operated lifting roof transparent for MLL high roof, air suspension for cab, fog lights, front halogen headlights, electrically adjustable and heated mirrors, hybrid bumper, front underrun protection, static passenger seat, one-piece lower bed, double thermo insulated box, digital tachograph 4.0, electronic immobilizer and 2nd vehicle key, luxury driver's seat air-sprung, heated, 4-way adjustable, lumbar and headrest with integrated 3-point seat belt, 2 reinforced anti-roll bars on rear axle, designed for moderate climates, exhaust outlet to the left, 170 Ah batteries, horizontal batteries on frame, rear suspension without spacers, generator 2,160 watts (24 volts x 90 amps), 2-cylinder air compressor 630 cc, rear shock absorbers, trailer socket for 24-volt operation, 15-pin, rear axle ratio: 4.23, heated fuel prefilter with separator, adaptive cruise control (ACC), ECO-Switch to switch between Power and Eco mode to optimize Total Cost of Ownership (TCO) by fuel-optimized engine and transmission settings, driving style analysis (DSE), transmission software eco-roll freewheeling function, VDI interface (Vehicle-Data-Interface) for telematics services (FMS) version 3.0, preparation for toll system (OBU), preparation for telematics system (telematics box), hill start assist (Hill Holder), electronic stability program (ESP), lane departure warning system (LDWS), emergency braking assistant, HI-TRACTION, rocking mode (free swing mode), left and right luggage compartments, 15m tire inflation hose, headlamp protection grilles, fully automatic air conditioning, leather multifunction steering wheel, sun roller blind, auxiliary heater diesel/water 4KW, front axle 8,000 kg / 1st rear axle 10,500 kg / 2nd rear axle 10,500 kg, spare wheel, reinforced front anti-roll bar, reinforced parabolic spring on front axle, AdBlue tank 80 liters, 50 mm 190 kN Ringfeder trailer coupling, fuel tank 550 liters, CAN bus interface CAN-OPEN for body control, infotainment system incl. navigation, axle load indicator, holding effect of parking brake on front axle, LED tail lights, retarder/intarder for ZF transmission, side marker lights, tires 385/65 R22.5 - 315/80 R22.5, bumper painted in cab color, aluminum air tanks, horn behind bumper, transparent sun visor. SCHEMEL–SHORT TIMBER BODY Ncsdjyfu Rmepfx Abzjw Crane: Palfinger-EPSILON loading crane Y_CRANE_ON_2 M 12 Z91 - Fully hydraulic timber loading crane Manufacturer: EBERT Dimensions: approx. 6,750 mm between bulkhead and crane - 4 ExTe bolsters D5 – adjustable with clamp fastener and lashing ratchets or support for load securing - with 8 ExTe stakes D5 – telescopic - with special Z-profile subframe 200 mm high, closed with checker plate in the center of the frame - Bulkhead welded construction with internal special aluminum profiles approx. 2,600 mm high - 4 x ¼ mudguards...

Condition: used, power: 419 kW (569.68 HP), axle configuration: 6x6, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 67,500 mm, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Ncodpfsyfq Dvsx Abzow Iveco S-Way AS300X57 Z/P HR ON+ Short Timber Truck, axle configuration 6X4 (with hydraulically driven front axle 6x6), tandem medium rear axle with outer wheels (HR), disc brakes, cab version Active Space, large cab, rear axle air suspension, 12-speed automated HiTroniX transmission, engine 570 C13 Cursor 13 570hp Euro VI, wheelbase 4800 mm, AS high-roof cab, cab roof insulation, electrically operated lift-up roof, transparent with MLL high-roof, air suspension for cab, fog lights, front halogen headlights, electric adjustable and heated mirrors, hybrid bumper, front underride guard, static passenger seat, one-piece lower bunk, double thermo-insulated box, digital tachograph 4.0, electronic immobilizer and 2nd vehicle key, luxury driver’s seat air-suspended, heated, 4-way adjustable, lumbar and headrest with integrated 3-point seatbelt, 2 reinforced stabilizer bars rear axle, moderate climate version, exhaust tailpipe left, 170Ah batteries, horizontal batteries on frame, rear spring without spacer, generator 2160W (24V x 90A), 2-cylinder air compressor 630cc, rear shock absorbers, 24V trailer socket 15-pin, rear axle ratio: 4.23, heated fuel pre-filter with separator, adaptive cruise control (ACC), ECO-switch for switching between Power and Eco mode to optimize Total Cost of Ownership (TCO) via fuel-efficient engine and transmission calibration, driving style analysis (DSE), gearbox software with ECO-Roll freewheeling function, VDI interface (Vehicle Data Interface) for telematics services (FMS) version 3.0, prepped for toll system (OBU), prepped for telematics system (telematics box), hill start assist (Hill Holder), electronic stability program (ESP), lane departure warning assist (LDWS), emergency brake assist, HI-TRACTION, rocking mode (rock-free mode), luggage compartments left and right, 15m tire inflating hose, headlamp protection grill, fully automatic air conditioning, multifunction leather steering wheel, sun visor blind, diesel/water auxiliary heater 4kW, front axle 8,000kg / first rear axle 10,500kg / second rear axle 10,500kg, spare wheel, reinforced front stabilizer, reinforced parabolic spring on front axle, AdBlue tank 80L, 50mm 190kN Ringfeder trailer coupling, fuel tank 550L, CAN-Bus CAN-OPEN interface for body control, infotainment system incl. navigation, axle load indicator, parking brake holding force on front axle, LED rear lights, retarder/intarder for ZF gearbox, side marker lights, tires 385/65 R22.5, 315/80 R22.5, hybrid bumper painted in cab color, aluminum air tanks, horn behind bumper, transparent sun visor. SCHEMEL–SHORT TIMBER–ALUMINUM BODY Crane: Palfinger-EPSILON loader crane Y_CRANE_ON_2 M 12 Z91 - fully hydraulic timber loader crane Manufacturer: EBERT ALUCAR Dimensions: approx. 6,750 mm between bulkhead and crane - 4 ExTe bunks D5 – installed with ExTe clamp mountings, Alucar stops as mechanical securing of bunks, ExTe lashing points (hook or ring system) - 8 ExTe aluminum stakes D-5, telescopic, or C-5, telescopic, complete with ExTe stake mountings - Alucar aluminum subframe HD, height 195 mm, double cranked...

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Darley System Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Njdowiatpspfx Abzocw Bending Length: 2550 mm Downward Speed: 100 mm/s Max. Pressing Speed: 13.5 mm/s Return Speed: 75 mm/s Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Oil Tank: 100 Liters

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4080 mm Distance between uprights: 3680 mm Press force: 170 tons CNC control: DELEM DA65 Number of controlled axes: 4 Controlled axes: Y1 / Y2; X; R Number of backstops: 4 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom: WILA Pneumatic die shifting CNC-controlled crowning DSP laser monitoring (new) CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 5650 x 2350 x 3100 mm Njdpfxozbugmo Abzecw Weight: approx. 18.5 tons Condition: Overall in good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2001, Technical specifications: Working length: 2050 mm Distance between uprights: 1750 mm Press force: 85 tons Control system: DELEM DA65A Adjustable back gauge Axes: Y1/Y2; X; R; Z1/Z2 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Power: 11 kW Hydraulic tool clamping, top and bottom: WILA system CNC-controlled crowning I-axis: pneumatic die shifting Njdpfx Aezbuc Iebzscw ACB angle control system CE marking Dimensions (length x width x height): approx. 2200 x 2750 x 2900 mm Weight: approx. 9.5 tons Condition: Very good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, Technical specifications: Working length: 2550 mm Frame width: 2050 mm Pressing force: 80 tons CNC control: OPERATOR II Graphic 14” TFT color monitor Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Working height: 960 mm Motor power: 9 kW CE marking Dimensions (length x width x height): approx. 3400 x 2050 x 2550 mm Weight: approx. 6 tons Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Ncsdpfx Asy D T Rwebzow Very good condition, little used, only approx. 5,350 operating hours The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 1999, condition: good (used), sheet width 500 – 1.600 mm sheet length max. 4.500 mm stacking weight max. 3 t stacking height (with pallet) max. 500 mm Nedpfxobh Dtwo Abzscw speed max. 40 m/min.

Condition: like new (used), Year of construction: 2017, operating hours: 5,357 h, load capacity: 1,400 kg, lifting height: 6,800 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, Manufacturer + model: STILL FM - X 14 * EX * Miretti 2G / Zone 1 Mast: 3F6800 ID: 25104.5599 Category: Used Mast: 3F6800 Lowered height: 2800 mm Lifting height: 6800 mm Nedpfozaf Aisx Abzocw Capacity: 1400 kg Year: 2017 Operating hours: 5357 hours Battery: 48 V / 420 Ah Options: * EX * MIRETTI System = INERIS 10 ATEX 3022 Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temperature class = T4 Equipped with: - 2 x Blue Spot - New tyres (ATEX specification)

Condition: used, functionality: fully functional, machine/vehicle number: 1177, Year of construction: 2018, operating hours: 14,645 h, load capacity: 1,400 kg, lifting height: 5,300 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Nsdpfx Abjy Upmpjzocw Chassis number: 1177 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Solid rubber Rear tire type: Solid rubber Battery type: PzS Side shifter, 3rd valve, roof cover, heating, safety light, interior mirror, joystick, - Telescopic forks (800 - 1200mm) - Electrically height-adjustable seat - Heating - Ventilation - Bluespot - Door

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Nedpfx Ajvfy Sxjbzecw Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible Njdpfx Aev Dia Asbzscw NUM 760 CNC Control Fixed steady rest 2 x  Stones and Flanches included Centre height: 647mm Grinding Ø: 1295mm Grinding length: 4267mm Grinding stone dimensions:914 x 152 mmmm Grinding stone speeds: 400 - 1200Rpm Cooling system: Yes Length: 8500mm Width: 4500mm Height: 3200mm Weight: 78000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: UL-S 1250 Njdpfx Aboxnxflszscw Output: 1,000 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water capacity approx.: 2,320 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner GL5/1-D/ZMD, separate control cabinet, feedwater pump, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, Ncedsyfg Htjpfx Abzsw control cabinet mounted on boiler body, and existing coarse and fine fittings With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, dosing vessel, Speck feedwater pump and sample water cooler