Used Stencil Printer for sale (2,689)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Special Offer – €45,000 EXW, valid until September 1, 2026 DIP-TECH AR 6000 (2013) + Integrated Drying Module After this date, the machine will be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Technical specifications: • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Itedpfx Asymb Tqoayek Inspection possible while powered on.

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Itedpfx Aaowpkcnoyek Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,075 h, total length: 483 mm, total height: 914 mm, total width: 564 mm, overall weight: 48 kg, For sale is an X7 3D printer from Markforged. The printer was used exclusively in a clean environment and is fully functional. Furthermore, the extruder and the print head were replaced recently, upgrading the printer to a Gen2 model. This also enables turbo printing. Iedpjwhduuefx Aayjtk

Condition: used, functionality: fully functional, operating hours: 1,616 h, total length: 584 mm, total height: 355 mm, total width: 330 mm, type of input current: AC, overall weight: 16 kg, Sales Description For sale is a Markforged Mark Two 3D printer, one of the leading professional fiber composite 3D printers for manufacturing high-strength functional parts. The printer is in good condition and has only 1,616 operating hours. Itjdpjzdnyqsfx Aayek Thanks to the ability to reinforce components with carbon fiber, Kevlar® (aramid), fiberglass, or HSHT fiberglass, extremely stable and durable components can be produced. Ideal for professional use in development, prototyping, mechanical engineering, motorsports, or the manufacture of fixtures and tools. The printer processes materials such as Onyx, Nylon White, PLA, and TPU, and offers a build volume of 320 × 132 × 154 mm. The scope of delivery includes numerous accessories and consumables:  Kevlar fiber  Fiber spools  Carbon fiber (already installed)  Dry box  Black PLA spools  New blue PLA spool  Print plate  Fiber load tubes  Fiber Bowden tube  Replacement nozzles  Torque driver  L-key set and other accessories Technical Highlights  Printing process: Fused Filament Fabrication (FFF) with continuous fiber reinforcement  Build volume: 320 × 132 × 154 mm  Materials: Onyx, Nylon White, Precise PLA, TPU 95A  Fiber reinforcement: Carbon fiber, Kevlar® (aramid), fiberglass, HSHT fiberglass  Tensile strength: up to 800 MPa (comparable to aluminum components)  Elastic modulus: up to 60 GPa  Precision print bed: flatness up to 160 μm  2nd generation extruder with material monitoring and out-of-plastic detection  WLAN connectivity (802.11 b/g/n)  Industrial quality for functional prototypes and durable end-use parts The printer is ready for immediate use and is suitable for both companies and ambitious users who want to manufacture high-quality, durable components.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A7X5021000012, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 600 dpi, space requirement width: 330 mm, counter reading (color): 503,000, For sale: a Konica Minolta C71cf roll-to-roll color label printer in good condition. It prints on various materials: vellum, coated paper, PP, PE, wine label stock, and PVC. The printer has only printed about 500 km. Currently connected and operational. Itedpfexuid Ssx Aayok We can also offer finishing equipment: Scorpio Plus SCR35PI, or Vorey VD320

Condition: excellent (used), Year of construction: 2017, AGFA Anapurna H2050i LED VERSATILITY. PRODUCTIVITY. QUALITY. A powerful 2.05 m hybrid UV LED printer for high-quality graphics production. One printhead needs replacement Only 975 hours printed, aqcuired from show room Under production, demo possible 2.05 m print width Up to 104 m²/h Itedpfx Aajzu Audjyjk UV LED curing technology Hybrid: rigid + flexible media Up to 3.2 m rigid-media length Up to 45 mm substrate thickness CMYK + Light Cyan + Light Magenta + White Up to 720 × 1,400 dpi Konica Minolta KM1024i printheads White ink for high-impact applications For further technical details refer to enclosed brochure

Condition: good (used), German RepRap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical specifications: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC, 50 Hz, 10 A, 2.3 kW Other features: Touchscreen Condition: used Scope of delivery: (See pictures) + Filament spools (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased separately by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Ijdpfszg Tz Esx Aayjtk

Condition: excellent (used), Year of construction: 2022, joke Technology ENESKA PostPro – Post-processing station for 3D printing Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Machine type: Post-processing station for additively manufactured components For sale is a used joke ENESKA PostPro post-processing station for the professional post-processing of additively manufactured plastic components. The system was specifically designed for the depowdering, deburring, grinding, polishing, and finishing of 3D-printed components and features a closed processing chamber with integrated extraction technology, LED lighting, and convenient tool control. The scope of supply includes a comprehensive original accessory package with various electric and pneumatic processing tools, abrasives, and other accessories as shown in the pictures. Technical data: Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Power supply: 400 V / 50–60 Hz Connected load: 6,500 VA Fuse: 16 A slow-blow Output voltage (U20): 24 V Working chamber volume: approx. 560 l Working chamber: Large stainless steel working chamber Closed processing chamber Large viewing window LED working chamber lighting Integrated compressed air connections Connections for multiple processing tools Equipment: Touchscreen control HEPA H13 filter system Closed processing chamber Manual operations with protective gloves Perforated stainless steel work table Tool connections for electric and pneumatic tools Height-adjustable machine feet Tool package: Electric precision grinder Electric high-speed grinder Pneumatic belt grinder Compressed air blow gun with spiral hose Compressed air hoses Original joke replacement gloves Grinding belts Grinding pins Grinding discs and flap discs Plastic hammer Screwdriver Other accessories as shown in the pictures Dimensions: External dimensions: approx. 1,437 × 1,685 × 1,640 mm Weight: approx. 748 kg Transport data: Weight: approx. 748 kg Easy loading using a forklift or crane. Condition: Used Machine from industrial use. Optical condition as shown in the pictures. Scope of supply: joke ENESKA PostPro Electric and pneumatic processing tools Compressed air accessories Original replacement gloves Iodpfx Ajzrvd Hoaystk Grinding and consumable materials Other accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Ijdpfey Ug Ecox Aayjtk Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: good (used), functionality: fully functional, machine/vehicle number: G1850438, operating hours: 675 h, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 220 V, input current: 7 A, table width: 390 mm, table length: 490 mm, Stratasys J850 Digital Anatomy – professional PolyJet 3D printer for medical and anatomical models For sale is a Stratasys J850 Digital Anatomy, a high-quality industrial PolyJet 3D printer for realistic medical, anatomical, and functional models. This machine is ideally suited for clinics, medical device companies, research institutions, universities, dental/medical laboratories, and service providers in the field of 3D printing and prototyping. The J850 Digital Anatomy enables the printing of complex models with multiple materials, colors, and Shore hardness values in a single print job. This makes it possible to represent anatomical structures such as bones, vessels, tissues, organs, and transparent areas in a particularly realistic manner. Typical applications include surgical planning, training, demonstration models, product development in the medical technology sector, and patient-specific models. Technical specifications / Additional information: Total printing time: 675 hours Technology: PolyJet / Multi-material 3D printing Layer thickness: up to 14 µm Multi-material printing with up to 7 base materials Full-color and transparent printing possible Software: GrabCAD Print / GrabCAD Voxel Print Network connection: LAN / TCP-IP Suitable for Digital Anatomy materials such as TissueMatrix, BoneMatrix, GelMatrix, and other PolyJet materials Condition / Storage notes: The machine is currently disassembled. Before disassembly, it was professionally flushed by Stratasys to prevent clogging or drying out of the print heads. As a result, the machine is properly prepared for transport or storage. Special features: Realistic haptics and appearance of anatomical models Very high level of detail and fine surface quality Printing of flexible, rigid, transparent, and colored areas in a single model Ideal for medical training, surgical preparation, and product development Industrial Stratasys quality Large build volume for complex models and small production runs Itedpfxsy Urwwj Aaysk Professionally flushed and prepared for transport/storage This machine is particularly interesting for users who want to produce high-quality medical models, demonstrators, implant/instrument prototypes, or realistic training models. Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with the exclusion of any liability for defects/warranty. No guarantee is provided. Errors and prior sale excepted. Inspection possible by appointment. Sale is ex-works.

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Itedey Tav Eopfx Aayok

Year of construction: 2017, condition: ready for operation (used), Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible. Ijdpjx H S N Rofx Aaystk

Condition: not inspected (used), machine/vehicle number: AAC3021001514, No minimum price – guaranteed sale to the highest bidder! For sale is a digital color laser printing machine from Konica Minolta, model AccurioPress C3070. TECHNICAL DETAILS Manufacturer/Model: Konica Minolta AccurioPress C3070 Equipment Class: Digital Color Printing System / Production Printing System Serial Number: AAC3021001514 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 1,184,396 pages Network: Yes WLAN: Yes Duplex Printing: No Itodpfezu Arijx Aayek MACHINE DETAILS The machine is offered expressly in an untested condition. A function test is not currently possible due to the missing hard drives or SSDs. This also applies to the printer controller. Therefore, the technical functionality of the main unit and the accessory components could not be confirmed. Hard Drives / SSDs: Missing Function Test: Not possible Technical Condition of Main Unit: Untested Technical Condition of Accessories: Untested Cosmetic Condition of Main Unit: Moderate signs of wear in the upper and front area Paper tray drawer: Opening or handle torn off Cosmetic Condition of PF-602: Moderate signs of wear in the upper and front area EQUIPMENT Konica Minolta AccurioPress C3070 Printer Controller Serial Number: A00043842 Finisher FS-532 Serial Number: 75710 Paper Feeder PF-602 Serial Number: 75711 Booklet/Finishing Unit SD-506 Serial Number: 75712 RU-518 Serial Number: 75713 Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 570115, Year of construction: 2013, operating hours: 928 h, total length: 1,400 mm, total height: 1,260 mm, total width: 1,100 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, For sale is a Stratasys Objet500 PolyJet 3D printer. The machine is explicitly offered as defective/in need of repair, as several print heads need to be replaced. Iedsy Uwlaspfx Aayotk The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet works with liquid photopolymer, which is applied layer by layer via print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional prototypes, molds, fixtures, and components with fine surface quality. After repair, the machine is suitable for professional applications in the field of rapid prototyping, product development, model making, design, medical technology, engineering, and small-series production. Depending on the version of the Objet500 series, multi-material or digital material applications are also possible. Stratasys describes the Objet500-Connex family as a triple-jetting platform with multiple material/color or material combination options. Condition: Defective / in need of repair. Based on current knowledge, some print heads need to be replaced. Therefore, the machine is explicitly sold without any functional guarantee. Commissioning or repair should be carried out by qualified personnel or an authorized Stratasys service partner. On-site inspection is possible by arrangement. The machine may be of interest as a repair project, a source of spare parts, or for reconditioning by a specialist company. Technical data according to the manufacturer's specifications for the Objet500 series: Manufacturer: Stratasys Model: Objet500 / Objet500 Connex series Process: PolyJet 3D printing Build volume: approx. 490 × 390 × 200 mm Layer thickness: up to 16 micrometers Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm Machine weight: approx. 430 kg Material cabinet: approx. 330 × 1,170 × 640 mm Weight of material cabinet: approx. 76 kg Power supply, depending on the version: 100–120 V or 220–240 V, 50/60 Hz, 1-phase Support material, depending on the system: SUP705 / SUP706B, depending on version and material approval The technical specifications refer to publicly available manufacturer/support data for the Stratasys Objet500 series. Stratasys specifies the build volume for the Objet500 Connex 1-2-3 as 490 × 390 × 200 mm; weight and system size are stated in data sheets as approx. 430 kg and 1,400 × 1,260 × 1,100 mm. Note regarding the defect: The machine is not sold as operational. Known defect: print heads need to be replaced. Other defects cannot be ruled out. Therefore, the machine is explicitly sold as a defective used machine/repair device/source of spare parts. Terms of sale: Sale exclusively to commercial enterprises/businesses. The machine is sold as a used machine, as described or as inspected, excluding any liability for defects/warranty. No guarantee is provided. Errors and prior sale are subject to change. Inspection possible by arrangement. Sale takes place at the location.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: AK26-015, number of ink cartridges: 8, total length: 4,400 mm, total width: 4,400 mm, total height: 1,820 mm, input voltage: 380 V, overall weight: 4,400 kg, product height (max.): 50 mm, Equipment: cooling unit, documentation/manual, Hybrid UV Inkjet printer for sheet and roll materials. Print resolution: 1200 dpi Modulation of the print droplet: Binary, Gray balance Number of colors: 6 colors - CMYK Lc Lm Additional white color that is printed before colored colors (underprint) Drying of all colors using LED lamps Dot size on the printhead: 7-14-21 picoliters Maximum material thickness: 50 mm Maximum width of printing on plate materials: 3,500 mm The possibility of simultaneous printing of two plates next to each other Display table for receiving plate materials with a length of 2,200 mm Maximum print width on roll material: one roll 3,470 mm, two rolls next to each other 1,625 mm Maximum weight of material in a roll: 350 kg Maximum roll diameter: 350 mm Ijdpfx Asqlahtjayjtk Supports for two rolls of length 3,470 mm on the input and display

Condition: ready for operation (used), A Roland printer/cutter is offered. Max. printing and cutting width: 1346mm, min./max. media width: 275mm/1371mm, max. media thickness for printing: 1.0mm, max. media thickness for cutting: 0.4mm, without liner: 0.22mm, max. cutting speed: 300mm/s, ink configuration: CMYK, blade force: 30-500gf, max. roll outside diameter: 210mm, max. roll weight: 30kg, core diameter: 50.8mm/76.2mm, max. print resolution: 900dpi, ink capacity: 500ml, weight: approx. 178kg. Inspection by prior arrangement is possible. Iodpfozta Ewex Aayotk

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlets and outlets: ISO-KF40 - Prepared for inertization (sieving with < 2% residual oxygen possible) - Incl. dosing unit and bottle holder - Gas connection with quick connector Specifications (excerpt from Assonic website) - Approx. 400 kg/h 316L at 63 μm - Approx. 100 kg/h AlSi10Mg at 63 μm - ATEX certification possible - Small footprint - Standalone machine - Low CO² footprint Accessories: - Laminate sieve 43 µm (new) - Laminate sieve 20 µm (new) - Laminate sieve 63 µm (used, for aluminum materials) Itodoywhvnspfx Aaysk Condition: - Very good condition, normal signs of use - Ready for operation - Scope of delivery: as described - Price: plus shipping costs - Sale exclusively to businesses - Sale without any warranty - No guarantee, no returns - Sold as inspected or as described - Liability for consequential damages excluded - Errors and prior sale reserved - All information subject to change

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Itjdpfx Aaev Iy H Ijyok Price negotiable

Year of construction: 2024, condition: new, functionality: fully functional, We offer this new Sinterit LISA PRO SLS 3d printer, year of construction 2024. Printer is new and has not been used other than tested by the manufacturer. The printer is packed into robust travel enclosure and is ready to be shipped. Approximately 7 kg of fresh PA12 print powder is included. Machine name: Sinterit LISA PRO Serial number: 021624120019 Manufacture date: 03/2024 Manufacturing country: Poland Itjdpfx Aeztkxhsayek Machine type: SLS 3D printer (Selective Laser Sintering) Dimensions (W x D x H): 690 x 500 x 880 mm Total weight: 90 kg Power supply voltage: 220-240 V Power supply frequency: 50/60 Hz Power supply current: 7 A Power consumption: 1.9 kW IEC protection class: Class I IP code: IP30 Maximum internal temperature: 210 °C Maximum external temperature: 60 °C FCC ID: TE7WN725N Laser product class (external): Class 1 IR laser product, invisible laser radiation Laser product class (internal): Class 4 IR laser product, invisible laser radiation If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2018, total length: 2,400 mm, total height: 2,945 mm, total width: 1,300 mm, type of input current: AC, overall weight: 2,900 kg, input voltage: 400 V, laser power: 3,000 W, One of the best model of the 3D metal printer model on the market. High tech, very accurate and fast, can print stainless and titanium. Made for aerospace manufacturing, but capable for other industries as well. Machine type: 3D printer Manufacturer: GE Additive Model: Arcam EBM Q20plus Year of construction: 2018 Condition: used Functionality: Fully functional Price 59000.- eur, loaded on truck. Best price you ever can buy such level printer. Packed into manufacturer boxes, ready to ship. Data from manufacturer: Max. build size 350 x 380 mm (Ø x H) Max. beam power 3kW Cathode type Single crystalline Min. beam diameter 140 μm Max. EB translation speed 8,000 m/s Active cooling Water-cooled heat sink Minimum chamber pressure 5 x 10-4 mbar Typical build atmosphere 4 x 10-3 mbar (partial pressure of He) He consumption, build process 4 l/h He consumption, ventilation 100-150 l/build Power supply 3 x 400 V, 32 A, 7 kW Isdpfx Ajvmpq Tsayotk Size approx. 2,400 x 1,300 x 2,945 mm (W x D x H) Weight 2,900 kg CAD interface Standard: STL Materials: Arcam EBM Ti6Al4V Grade 5, P-Mtrl Arcam EBM Ti6Al4V Grade 23, P-Mtrl

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 556 h, total length: 483 mm, total height: 914 mm, total width: 584 mm, type of input current: DC, overall weight: 48 kg, warranty duration: 16 months, feed length X-axis: 330 mm, feed length Y-axis: 270 mm, feed length Z-axis: 200 mm, For sale: Markforged X7 industrial 3D printer – in excellent/like-new condition We are offering a Markforged X7 industrial composite 3D printer for sale, purchased in 2024, with only 557 operating hours. This means the unit has seen very little use and is in outstanding condition. Isdpfx Aasydmnbjyjtk The machine comes with a valid manufacturer’s warranty. All consumables supplied at the time of purchase (in original drum packaging) are present, along with all original accessories, documentation, and packaging. Key features: Model: Markforged X7 Year of purchase: 2024 Operating hours: 557 hours Condition: used, excellent / like new Warranty: valid Accessories: full, factory Materials: complete set in packaging Original drum packaging The Markforged X7 is an ideal solution for industrial prototyping, functional parts, tooling and fixtures, where high strength, precision, and reliability are essential. The machine can be inspected, tested, and is ready for immediate commissioning upon request.

Condition: not inspected (used), machine/vehicle number: XMS00835, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon imagePRESS C850 with extensive accessories and a controller system. This machine is suitable for professional production and color printing in formats up to DIN A3. TECHNICAL DETAILS Manufacturer/Model: Canon imagePRESS C850 Device Class: Copier / Production Printing System Serial Number: XMS00835 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 5,283,148 pages Network: Yes WLAN: Yes Duplex Printing: No Condition: Used Controller System Model: CONTROLLER_T42 Serial Number: 1711072031 Housing: Tower Housing Hard Drive: 500 GB Operating System: Not installed EQUIPMENT Canon imagePRESS C850 Controller System CONTROLLER_T42 Tower Housing 500 GB Hard Drive Booklet Trimmer-F1, Item Number F713900 Document Insertion Unit N1, Item Number F281260 SSD Bridge, Serial Number 75724 SSD Square Fold Module SFM 7714, Serial Number 75723 Paper Deck-C1, Item Number F281030 Booklet Finisher-W1 PRO, Item Number F710700 The printing machine and accessories are offered without technical inspection. A functional test of the individual components could not be carried out. The data storage device of the printing machine has been destroyed and recycled. HDD/SSD of the printing machine is missing. The toner or printer cartridge is almost empty. The controller system does not have an installed operating system. The accessory components are explicitly sold as untested. Please note the following: Ijdpjzu Adfjfx Aayotk The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty and guarantee. The information on the technical data comes from the original offer. No guarantee is given for typing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm Ijdpfx Aaen Utdqsyotk This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Year of construction: 2006, condition: good (used), 8 color Polytype BDM 611 cup printing machine. Ijdpen Utctjfx Aaystk Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. Isdpfstp Up Eox Aaystk About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!