Used Stephan Vm/Hc 60 Cooker/Cutter for sale (24,404)

Condition: new, Heidenhain professional display screen, 12", model no. 635 486-03, serial no. 31419584. Unused, with signs of storage. 100% functional. Scope of delivery as shown in the photos. Todsi Eadfspfx Aklsa

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Tjdpfx Aewc Afheklsa Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min Tedpfxjwix Hhs Akloa tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Year of construction: 2018, functionality: fully functional, HCU 7/160 Cone Crusher Year of manufacture: 2018 Crusher inlet [mm]: 160 CSS [mm]: 12-32 mm Motor [kW]: 90 Hydraulically adjustable gap The crusher produces cubic material and is suitable for the hardest materials. Tjdpfx Aozl N Ulsklsa Crusher with oil tank and 90 kW motor Crusher with control cabinet and PC control Galvanized support structure included Machine is fully operational

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Tsdpfx Aoy H Aizoklea

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 101,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Upon request, the following equipment can also be provided: * Fourth-axis table * Tailstock * Set of tool holders Tedpfjzmfn Rox Aklsa The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: excellent (used), For sale: power generator: -VM V12130I 12 cylinders, twin-turbo Power: 250kVA; 200kW The generator is equipped with a modern control panel for emergency generators Alessandri A2000 (control box manufactured in 2015). Tsdpfx Asvq Ighjklja This allows the generator to operate in automatic mode – in the event of a power outage, the generator starts automatically within about 1 second, and when the grid power returns, the generator shuts down automatically. It can also operate in manual mode like a standard generator, allowing the user to start and stop the unit manually. In addition, the panel monitors several generator parameters such as oil pressure, oil temperature, fuel level, and other operating parameters. Tag: generator, power generator, electricity generator, portable generator, diesel generator, gas generator, backup power, emergency power, standby generator, inverter generator

Condition: new, Year of construction: 2026, TVM Ø 600 – Customizable High-Performance Cutters The TVM Ø 600 and TVM Ø 700 are the largest saws produced by CURSAL, featuring a vertical reciprocating blade movement, the fastest in the industry. If the cutting dimensions match, there's no doubt: this is the machine for you. Unique Advantages of TVM Ø 600: Unbeatable cost-performance ratio: a robust and reliable machine at a competitive price. Ease of use and minimal maintenance: designed for minimal maintenance, ensuring long-term high efficiency. Increased productivity: TVM 600 significantly reduces working time, boosting production. Modular Design and Total Customization: The TVM series is designed with a modular system for custom assembly, adapting to the specific needs of each customer. The production lines are complete with turnkey solutions, ready to use. Versatility in Applications: TVM Ø 600 is ideal for: Electropneumatic stops for cutting packs of boards with repetitive dimensions. Numerical control stops where high measurement flexibility is required. Efficient Discharge: Semi-finished products are expelled via transfer, discharge tables, or roller conveyors, ensuring continuous and optimized production flow. Strengths: Operator safety: maximum protection for the operator. Improved ergonomics: optimizing production steps. Material wear compensation: no frequent replacements required. Simplified maintenance: reducing machine downtime. Customizable with CURSAL accessories: to meet all production needs. Optimized cost-quality ratio: maximizing the cost-benefit balance. Main Applications: Side scrap recovery for multi-blade cutting Semi-finished products for wooden furniture Packaging sector Doors, frames, baseboards, and construction Sawmill operations in general The TVM Ø 700, an advanced version, is often combined with additional solutions like: Electropneumatic stops for repetitive cuts. Numerical control stops for greater flexibility in measurements. Optimized Discharge and Production Flow: As with the Ø 600 model, semi-finished products are expelled via transfer, discharge tables, or roller conveyors. Additional Strengths: Enhanced safety and ergonomics. Todpfsv Iqa Esx Aklsa Low maintenance and long service life. CURSAL accessories for advanced customization. Cost efficiency to optimize investment returns. TVM Ø 700 Applications: Side scrap recovery for multi-blade cutting Semi-finished products for wooden furniture Packaging sector Doors, frames, baseboards, and construction Sawmill operations in general

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 560 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of axes: 3, This 3-axis Bridgeport VMC 560/22 was manufactured in 1995. It features an X-axis travel of 560 mm, Y-axis travel of 380 mm, and Z-axis travel of 520 mm. The machine is equipped with a spindle speed of 6,000 rpm and a tool magazine with 22 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 560/22 vertical machining centre we have for sale. Contact us for further details. Tool taper: BT40Rapid Traverse: X/Y: 20 m/min; Z: 16 m/min • Outer length: Approx. 840 mm • Outer width: 360 mm • Table load: 500 kg • Number of tool slots: 22 Todpfx Akszizi Aelsa • Tool taper: BT40 • Max tool length: 250 mm • Maximum tool diameter (adjacent pocket empty): 130 mm • Maximum tool weight: 6 kg

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW Todpfx Aszkrnrsklea - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), Catalog number: 7303 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 3 pcs Tjdpszkg Tcofx Aklja - Max. thickness of the workpiece: 250mm From above: - Pawls - Toothed infeed shaft, pulling - Pressure rollers - Surfacing shaft - Pressure rollers - Smooth outfeed shaft, pulling From below: - Adjustable rollers in the lower bed: 2 pcs - Motor: 7.5kW - Electric bed lifting - Lifting motor: 0.75kW - 4 feed speed settings - Feed motor: 1.5kW - Diameter of dust extraction nozzle: 140mm - Dimensions (L/W/H): 1120x1250x1680mm - Weight: 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4738 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to larger fluctuations)

Condition: used, Year of construction: 2023, ---- * Engine: Doosan D34 Stage V * Generator: Stamford S1L2-Y1 * Continuous power: 60 kVA Tjdpfx Akezkzx Teloa * Weight: 1,850 kg

Condition: used, Year of construction: 2022, operating hours: 2,053 h, ---- Example images Todpfxezkzl Ts Aklja Several units available Price based on operating hours: 1,680 hours - €18,100.00 net 247 hours - €18,900.00 net 1,080 hours - €18,500.00 net 94 hours - €19,500.00 net Visa Generator DS65SGVM 60kVA Stage V: 400 hours - €24,500.00 net 1,002 hours - €24,000.00 net

Condition: excellent (used), Stephan MCH 20 microcutter Tsdpfxjzlr Smj Akloa Height: 1600 mm Width: 950 mm Length: 1600 mm Total power: 15 kW Cutter type: Pass-through cutter Cutter material: Stainless steel

Condition: good (used), Year of construction: 2013, Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood and spray device -Manufacturer: KAYAKOCVIB, Round vibrator type KVM 600 -Work container: elastically mounted -Total volume: 600 liters -Outer diameter: 1360 mm Todpszhxduefx Aklea -Work basin width: 430 mm -Work basin height: 570 mm -Accessories: Soundproof hood, spray device, speed controlled, pneumatic separator flap -Machine for: Deburring, polishing, edge rounding -Machine dimensions: 1650/2230/H1330 mm -Dimensions of the control box: 780/1070/H280 mm -Weight: 1395 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For technical specifications, please refer to the images. Available starting in early October 2026. Tedpfjzhuwqex Aklsa

Condition: good (used), Year of construction: 2008, Universal machining center: Fahrständer Machine type: AXA VHC 2 - 1760 XTS Control: Siemens 840 D ShopMill Year: 2008 SPECIFICATIONS Travel X-Axis: 1.760 (2 x 630) mm Y-Axis: 600 mm Z-Axis: 800 horizontal oder 770 vertikal mm A-Axes B-Axes: +/- 100°, hydraulisch geklemmt, stufenlos interpolierend Rapid motion: (X/Y/Z): 40 / 40 / 30 m/min. Amount of controlled axes: 5 Spindle speeds: 30 - 6.000 rpm Tjdpfx Aozimr Aokloa Spindle power: 30 kW Torque: 143 Nm Tool: SK 40 Toolchanger Tool capacity: 36 NC rotary table: AXA RTA 4L-520 face plate: Ø 520, für vertikalen & horizontalen Aufbau mm Tailstock: manuell, Spitzenhöhe 280 mm Machine weight: 12.000 kg Req. space (LxBxH): 5,2 x 3,4 x 3,3 m Equipment Internal cooling: 30 bar Chip conveyor: links abwerfend, integrierter 200 l Kühlmittelbehälter cooling system Cooling tank: 400 l Caliper: 3 D, Renishaw RMP 60 mit RMI Empfänger (kabellose Ausführung) wahlweise Verwendung der Aussenkühlung mit Durckluft oder Emulsion Direct linear scales: Heidenhain Working mode: 4 Flachführungen gehärtet Gegenführungen mit Gleitbelag (Turcite) beschichtet Erneuerung des Gleitbelag des Grundschlittens X/Y in 2022.

Condition: good (used), Three-phase motor, electric motor -Power: 1.5 kW -Speed: 3000 rpm -Brake Tjdpfx Ajb A Hktjkloa -Shaft: Ø 24 mm -Design: B5 -Protection class: IP 44 -Number: 3x motors available Price: per piece -Weight: 25 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg Tsdjb A Nnrjpfx Akloa

Condition: used, Gear motor, electric motor -Speed: 40 rpm -Power: 9 kW -Construction: B3 -Diameter shaft: Ø 80 mm -Protection class: IP 33 Tedpfx Akjc Il D Aslsa -Dimensions: 1000/385/550 mm -Weight: 260 kg

Condition: good (used), Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm Tedpfsci Shvox Akloa -Protection class: IP 33 -Dimensions: -Weight: 113 kg

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 Todpfxjptf Iao Aklsa -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Year of construction: 1994, condition: good (used), Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm Tjdpeu Scpqefx Akloa -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor Tsdpfxsciw Sxo Aklea -Speed: 146 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 45 mm -Protection class: IP 33 -Dimensions: 630/260/H300 mm -Weight: 75 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 51 rpm Tedsci Dlkopfx Akloa -Power: 0.25 kW -Design: B14 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Dimensions: 580/250/H200 mm -Weight: 35 kg