Used Stimin Fus-22.2M for sale (430)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Nwjdpji Rixkjfx Ai Ten Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. Njdpfx Aisxx R Nqs Tjwn - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: new, Fü 2270 ± 0.1 mm, graduation 0.002 mm, outer ring diameter 40.5 mm, H. PREISSER · Automatic switching of the measuring direction · Robust housing with three recessed dovetail guides · Rotatable dial · Measuring insert with 2 mm carbide ball Nodpfx Ao Ab Ez Rsi Tjwn · Measuring insert thread M2 Measuring range: ± 0.1 mm Outer ring diameter: 40.5 mm Display: 0-100-0 Measuring insert length: 14.5 mm Resolution: 0.002 mm

Condition: used, Offered is a CNC knee-type milling machine, model FU 400 × 1600. Clamping surface: milling table with T-slots. CNC control: VEB Numerik CNC-H 646. Equipped with a machine vise, flexible coolant hose and swiveling CNC control panel. Inspection possible by arrangement. Nsdj Afpkwepfx Ai Town

Condition: new, Manufacturer: Balluff Condition: New, packaging only opened for the purpose of taking photos Type: Inductive coupler Model: BIC1B0-IT1A7-Q40KFU-SM4A4A Order number: BIC007F Product series: BIC Design: IO-Link Base Transmission principle: Non-contact inductive energy and signal transmission Nwedpfxezcw T Es Ai Ton Communication interface: IO-Link Design: Q40 Connection type: M12 connector Protection class: IP67 Application area: Tool changing systems, robotics, handling technology, and automated production systems Use: Contactless transmission of energy and IO-Link data between stationary and moving machine components Mounting type: Machine and plant engineering

Condition: used, mileage: 68,500 km, power: 110 kW (149.56 HP), first registration: 01/2013, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, crane, differential lock, electronic stability program (ESP), fog lights, power assisted steering, traction control, Vehicle location: en route / in transit, short cab, rear window, heated mirrors, electric window (left), electric window (right), radio, 5-speed gearbox, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, differential lock, work lights, rotating beacon, storage compartment, leaf spring suspension, U-shaped protection, side aluminum fender, crane behind the cab, emergency stop, foldable, 4-point hydraulic outriggers, 1x hydraulic extension, green environmental badge. Nwsdpfx Aozgu Slei Tsn Superstructure: Blumenbecker HM16TKI aerial work platform with work basket, working height approx. 16m, lateral reach approx. 8.45m. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 201,920 km, power: 92 kW (125.09 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,200 mm, total height: 3,200 mm, loading space length: 4,400 mm, loading space width: 2,150 mm, loading space height: 2,150 mm, * Mitsubishi Canter Fuso 3C13 * Twin tires * VIN: TYBFB833BE4DU06124 * Engine type: 4M4.2A3-73-40 * kW: 92 * Displacement: 2977 cc * Euro 5 * Unladen weight: 2790 kg * Payload: 635 kg * Gross weight: 3500 kg Nwsdpfsy Ng Umjx Ai Ton * Wheelbase: 3350 mm * Body internal length: 4.40 m * Body internal width: 2.15 m * Body internal height: 2.15 m * Vehicle length: 6300 mm * Vehicle width: 2200 mm * Vehicle height: 3200 mm * Tires: 195 / 75 R 16 C * Vehicle without VAT * All information provided without guarantee Tel./WhatsApp:

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, total width: 1,995 mm, total height: 2,195 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Description: Fuso Canter 7C18 Roll-off Tipper, latest generation Wheelbase: 3400mm. For container lengths up to 4000mm. 3L Turbo diesel engine, 129 kW / 175 hp, EURO 6 Start/Stop automatic 5-speed manual transmission Wheelbase: 3400mm Rear axle with twin tires and automatic differential lock Traction tires: 205/75 R16C 4-wheel disc brakes Electronic Stability Program (ESP) ABS with electronic brake force distribution Ball-type trailer coupling 3-year warranty on the base vehicle from the date of first registration or up to 100,000 km. Comfort cab with the following features: Electric windows Electrically adjustable and heated mirrors Central locking with remote control Immobilizer Adjustable steering wheel and steering column Driver airbag 2 DIN radio with Apple Carplay and reversing camera Tachograph with digital technology EC-approved tachograph Storage compartment above the windshield & behind the seat Double passenger seat Driver's seat with armrest Lockable glove compartment Fog lights with automatic daytime running lights Tilting cab Lane keeping assist Emergency braking assist Turning assistant Nwsdjy T Tx Hepfx Ai Ton Automatic climate control Digital tachograph Steering wheel with control unit LED work lights at the rear LED reversing lights * Other cab variants, wheelbases, bodies, and hydraulic systems for snowplows and spreaders are in stock or available for short-term delivery. Please inquire! Roll-off system: KING HZ6 90-degree hook height Push arm system Shallow lifting angle Hydraulic container locking Including remote control Pulling and tipping force: 6000 kg Mechanical hook lock Load holding valves on all hydraulic cylinders Emergency stop function Body: CE-approved Drive via vehicle hydraulics For roll-off containers from: 2800 to 4000mm in length. Various containers in stock!!! Various cab variants and wheelbases with higher payloads are available for short-term delivery. This allows for the realization of larger container sizes. Large-volume containers with rear tailgate on the right/left, as well as drive-through versions with a traversable rear flap, platform body designs with folding side panels, and lattice bodies are available at an extra cost. You can find more vehicles of the Fuso Canter and Multicar brands, as well as various container sizes, at: Leasing / Financing / Trade-in ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors. Our general terms and conditions apply.

Condition: used, mileage: 28,910 km, power: 129 kW (175.39 HP), first registration: 07/2023, fuel type: diesel, overall weight: 7,490 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 6, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, MB FUSO 8 180 TT-S Horsetruck For 1-3 horses, rear and side ramp, pop-out, underfloor storage beneath the living area, external storage compartments all around. Nsdsywqxlepfx Ai Tewn 4 berths, living room, video surveillance. Stationary air conditioning, auxiliary heater, 1 TV/SAT, real wood finishes, bathroom, shower, WC, air conditioning, kitchen, leather seating area, microwave, refrigerator and freezer, external tack locker, winch, cruise control, alloy wheels, navigation system, towbar, and much more. Errors/data entry mistakes & interim sale reserved. * NET SALE POSSIBLE. * Top leasing offers * Net price in Germany plus 19% VAT. Available immediately // Location and vehicle viewing: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all makes in the area of horse transporters and trailers. Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: used, mileage: 587,500 km, power: 129 kW (175.39 HP), first registration: 08/2017, fuel type: diesel, overall weight: 7,500 kg, gearing type: automatic, emission class: euro6, Equipment: tail-lift, Tail lift: ----Refrigeration unit: ----- Automatic tail lift – air conditioning – Carrier Supra 550 Suspension: Nwjdpfx Aiex Dzqvo Tsn Leaf suspension

Condition: used, mileage: 124,990 km, power: 107 kW (145.48 HP), first registration: 04/2010, fuel type: diesel, empty load weight: 3,605 kg, maximum load weight: 2,895 kg, overall weight: 6,500 kg, tire size: 215/75R16C, axle configuration: 4x2, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 7, Equipment: ABS, additional headlights, cabin, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, rear window, heated mirrors, electric window left, electric window right, auxiliary heating, switch 6, ABS (anti-lock braking system), work lights, rotating beacon, stowage box, leaf spring suspension, trailer coupling ball head, G1 noise protection, U-protection, aluminum side bumpers, green environmental badge Body: Roll-off system AJK type NHS3-3150 for city containers up to 3.4m In February 2019 the coupling was renewed at 103600km! Nwjdpjvhicfefx Ai Ten Spare wheel available for an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Njdpfx Aisygud As Tewn Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: new, -New/One Way -available immediately -The price is from the Duisburg depot (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our new 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: Njdpfxsvx U U Is Ai Tewn - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: used, container length: 20 ft, empty load weight: 2,100 kg, -Used -Wind and waterproof -available immediately -The price is ex depot in Munich (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. Nwsdsvyacgepfx Ai Ton - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Year of construction: 2010, condition: ready for operation (used), Diosna WV600 ATP/T/FU Premium wendel mixer with 4 bowls 600kg dough year of build 2010 2 speed frequency controlled geardrive scraper with temperature measurement stainless steel digital Siemens Simatic Multi touch panel shorter kneading time fast dough sequence lower dough heating suitable for all types of dough, thanks to the gentle kneading capacity in flour 375kg Nedpfx Aiewa Sz Tj Tjwn bowl contents 1020 liter

Condition: like new (used), Year of construction: 2021, Braun Melsungen syringe pump Perfusor Space US. Power Supply SP US III (REF 8713112D). Space Pole Clamp (Speed Clamp) (REF 8713131). Unused in original packaging. Includes functional guarantee. Nwsdowutvzepfx Ai Ton

Condition: new, Year of construction: 2025, container length: 20 ft, NEW CONTAINER / ONE WAY / Year of manufacture 2025/ 2026 +Lock box +Forklift pockets Nsdpswut Nbjfx Ai Tswn Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: used, Year of construction: 1986, Universal Milling Machine Manufacturer: IMATEC, Type: FU-145 Year of manufacture: approx. 1986 Technical Specifications Manufacturer: IMATEC Type: FU-145 Year of manufacture: approx. 1986 Conventional Control System Travels X/Y/Z: 1000 / 300 / 500 mm Vertical Spindle Speeds: 38 - 1440 rpm Horizontal Spindle Speeds: 35 - 1500 rpm Spindle Mount: ISO 50 Milling Motor: 5.5 kW Connected Power: 7.0 kW Installation Dimensions: approx. L 2.0 x W 2.10 x H 2.2 m Nodpowhm R Ssfx Ai Tswn Weight: approx. 3.1 t Features • 3-axis digital display ELESTA • Table size: 1620 x 320 mm All information is subject to change without notice. A live demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2008, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: Nedpfx Aijwhp Dzs Tjwn - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: ready for operation (used), Hörmann B 460 FU control unit, 636721, 230V, 50 Hz, serial number: 65924483590, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Nwjdpolcf Skofx Ai Ten

Condition: used, mileage: 101,561 km, power: 107 kW (145.48 HP), first registration: 05/2007, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, tail-lift, * Mitsubishi Canter Fuso 7C15 4x2 * Box body with tail lift Nsdpfx Asr Ex Daji Tswn * Air conditioning * Manual transmission * VIN: TYBFE85BH6DU00370 * Engine type: 4M5.2AR-33-69 * kW: 107 * Euro 4 * Displacement: 2977 cc * Unladen weight: 4460 kg * Payload: 2965 kg * Gross vehicle weight: 7500 kg * Wheelbase: 4200 mm * Box interior length: 6.15 m * Box interior width: 2.50 m * Box interior height: 2.50 m * Margin scheme taxation * All information provided without guarantee Tel./WhatsApp:

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 Njdpfx Aett Slcei Tewn - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a like-new Drechselmeister Stratos FU 230 lathe with a center distance of 680 mm and a 2 HP motor. The exhibition machine is in its original condition, so you will receive the full warranty. Technical specifications: Nwedpfjzwt H Nex Ai Ton - Center height 230 mm - Swing diameter 455 mm (with optional external turning attachment 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle connection M33 x 3.5 (hardened) with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor 2 HP (connection 230 V) - Weight 178 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: Lathe, turning machine, lathe, wood turning lathe, turning, turning tool, wood turning, turning, machine Reference: R-A0117

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm voltage 26,8 V total power requirement 26,8 kW weight of the machine ca. 0,040 t Nedpfxox Dda Ts Ai Tswn

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Njdpoxx Sclsfx Ai Town Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition