Used Strand Pelletizer for sale (428)

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Nedpox Dip Tjfx Agrowl Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag industrial lifting crane. This crane can lift loads up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions can be found in the last image. The inspection logbook will be provided upon purchase. Type: PM V8 V1 F6 Year of manufacture: 1992 Number of load strands: 1 Nsdpfsxcnmnjx Agrswl Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 kW: 0.2 / 0.03 Protection class: IP 54

Condition: good (used), Wood chip and pellet-fired boiler Rated heat output: 50 kW Height: 1745 mm Width: 640 mm Nwjdpfx Agowu Rifjrol Length: 1550 mm Weight: 850 kg Maximum permitted operating temperature: 90°C Maximum permitted working over-pressure: 400 V / 50 Hz / C16A

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Njdpfx Aou Swb Ujgrjwl Net weight: 16.5 kg Good condition

Condition: new, Year of construction: 2020, Transport dimensions (L x W x H): 0 x 0 x 0 ---- Basic version (2-4 strand operation) Hoisting unit with frequency inverter Radio remote control Complete support system for stationary operation Boom 40m Turntable extension Nodpszkzxgofx Agrswl Lighting transformer 4.7 kVA Slewing and trolley travel limit DKR 2.5m (=14 x ballast a? 2000 kg)

Condition: used, This listing is for a Sorvall Heraeus 75002000 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75002002 Round Buckets Nwedpfxexxy Ucj Agrel Enhance your laboratory's centrifugation capabilities with the Sorvall Heraeus 75002000 rotor, crafted for efficient performance in various applications. Key Features: Manufacturer: Sorvall Heraeus, known for reliability in laboratory centrifugation. Part Number: 75002000, ensuring you have the correct rotor for your specific needs. Maximum Speed: Capable of reaching up to 4,700 RPM, providing effective and rapid sample separation. Rotor Type: Swing Bucket Rotor design allows for smooth operation and optimal pelleting of samples as buckets swing out during centrifugation. Capacity: Accommodates 4 x 400 mL sample tubes, making it suitable for moderate volume applications. Maximum Load: Designed to support a max load of 540 g, ensuring stability even with heavier samples. Maximum RCF: Achieves a maximum relative centrifugal force (RCF) of 4618 x g, which is effective for a wide range of laboratory separation tasks. Compatible Centrifuges: Sorvall Legend Mach 1.6 Heraeus Multifuge 1S

Condition: used, This listing is for a nonoperational Eppendorf Mixmate 5353 Mixer. This unit is supplied nonoperational and is ready for immediate release. The Eppendorf MixMate 5353 is an advanced lab mixer designed for optimal precision and efficiency when handling small sample volumes, making it an essential tool for various applications in research and clinical settings. Key Features: Versatile Format Compatibility: The MixMate can accommodate a wide range of tube and plate formats, including 96 and 384 well plates, as well as 0.2ml PCR tubes, 0.5ml, 1.5ml, and 2.0ml tubes. Integrated Vortexing Action: Its unique vortexing action is perfect for applications such as resuspending bacterial pellets, DNA samples, cell cultures, conducting immunoassays, and performing solubility tests. For instance, it can quickly re-suspend DNA pellets after ethanol precipitation, ensuring thorough mixing without sample loss. Speed and Flexibility: Mixing Frequency: Ranges from 300 to 3,000 RPM in 50 RPM increments. Touch Vortexing Frequency: Reaches up to 3,500 RPM for rapid, on-demand mixing. Nwjdpfxjxv A Tcs Agrol 2D Mix Action: The innovative 2D mixing action ensures uniform mixing across all wells, which is critical for experiments requiring consistent sample homogeneity, such as high-throughput screening assays. Adjustable Mixing Time: Users can set mixing times between 15 seconds and 99.5 hours or choose continuous operation, providing flexibility for both quick mixing tasks and longer protocols. Programmable Features: The user-friendly digital control panel can store up to 5 predefined programs, allowing for quick access to frequently used mixing parameters. Specifications: Plate Dimensions: Accommodates plates sized 5 x 3 inches. Power Requirements: Operates on 115 – 230V; 50-60 Hz. Dimensions: Compact size of 9 x 7 x 7 inches. Weight: Weighs 10 lbs, making it portable yet sturdy. Applications: The Eppendorf MixMate 5353 is ideal for: Molecular Biology: Resuspending nucleic acid samples and cell cultures. Immunology: Preparing samples for immunoassays with consistent mixing. Pharmacology: Conducting solubility tests for drug compounds in different solvents.

Year of construction: 2012, condition: excellent (used), Category: Twin-screw extruder Number: DE27691 Manufacturer: Feddem Type: DEC 72 MTS Year of manufacture: 2012 Capacity: 400 – 700 kg/h Screw diameter: 2 x Ø 72.0 mm L/D: 32D, including housing extension to 42D Drive: 168 kW Nwodsvk Sgfepfx Agrsl Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing – 2 side feeders, 6 Schenk gravimetric dosing units, ECON EUP 600 underwater pelletizer, Trendelkamp classifying screen, degassing, vacuum pump, BSG control system Very nice complete system with only approximately 3,500 operating hours. The offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry, we have the right product for almost every budget.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure Nsdpfx Aowigbmsgrowl 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) Nwodpfx Agszb I Iwjrsl - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: good (used), power: 120 kW (163.15 HP), control type: PLC-controlled, For Sale: Complete 120 kW Industrial Pellet/Bio-Heating Container A powerful and turnkey heating solution. This package combines a high-capacity boiler with a professional 95–120 kW EcoTec B3 burner system, all pre-installed in a weatherproof container. Ideal for farms, large properties, or industrial facilities. Technical Specifications (Model 120) Designed for heavy-duty operation with the following features: Boiler & Performance - Nominal Output: 120 kW - Burner: EcoTec B3 (95 kW nominal / compatible with 120 kW boiler) - Dry Weight: 1030 kg - Water Capacity: 450 l - Max Operating Pressure: 1.5 bar - Max Operating Temperature: 110°C - Material Thickness: 6 mm (fire surfaces and water jacket) Physical Dimensions - External Dimensions: 1485 mm (Depth) x 930 mm (Width) x 1410 mm (Height) - Firebox Size: 650 x 650 x 1030 mm (Volume: 480 l) - Container: Approx. 10 ft, blue, including chimney stack and external fuel loading port Fuel & Chimney Requirements - Fuel: Wood pellets / biofuel (compatible with underfeed firing technology) - Chimney Outlet: 1060 mm from floor, 160 x 220 mm flue size - Chimney Recommendations: - Fuel with moisture < 20%: Ø 220 mm / 8 m height - Fuel with moisture > 20%: Ø 250 mm / 10 m height Key Features - Turnkey Solution: No boiler room required. 10 ft container is fully preinstalled and “plug-and-play” – simply connect to your heating system and supply power. - Professional Automation: Fitted with a Unitronics Vision230™ PLC controller and an intuitive control panel (main switch, pump control, fault reset, and emergency stop). - Robust Construction: Heavy-duty Swedish engineering by Sahlins EcoTec AB (2007). 6 mm steel ensures a long operational life. - Large Fuel Silo: Integrated, internal V-shaped bunker with heavy-duty feed auger for extended autonomous operation. - Connections: 50 NS flow/return and expansion, 20 NS thermostat, and 2x 50 NS electric heater connections. Nwodpsy Eipfsfx Agrol Sales Information - Condition: Meticulously maintained, complete working unit. This is a unique opportunity to acquire a high-output, mobile heating plant at a fraction of the price of a new system.

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to #000,5. The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! Nodjf Hp U Uopfx Agrswl The capsule filling machine SPT-FS 50 for general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 6; Max.production quantityof capsules - 50000 psc/h; Capsule size #00,1,2,3,4 (optional #000,5) Weight of machine - 1470 kg; Space consumption - 1.200 x 1.470 x 1.850 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG Nwjdpfer Ix Igex Agrsl looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Year of construction: 2022, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,000mm (customizable) Angle in the bend freely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) Nwsdpfx Asilg U Esgrel We supply our conveyor belts in PVC, PU, ​​felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x30mm T-40 lugs - 300mm pitch 2-layer particularly laterally stable We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Stable roller conveyor with hydraulic lifting and lowering cross conveyor. Conveyor length to stop 6.0 m. Total length 7.10 m. Roller length 1,600 mm. Roller diameter 200 mm. Built-in lifting and lowering cross conveyor with Nsdpfet A U Dysx Agrswl 6 chain strands, can be raised and lowered hydraulically. Completely re-stored before decommissioning.

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, Nwodpfx Aged Nm Sijrol * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: used, Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Core cable: stranded wire 1 x 10 mm flexible, finely stranded -Length: 16 m Nwodpfx Aef T Spljgrol -Dimensions roll: Ø 500 x 415 mm -Total weight: 16 kg

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: WFB2500x2400, conveyor belt length: 4,900 mm, conveyor belt width: 290 mm, conveyor belt speed: 400 mm/s, total length: 4,200 mm, total width: 540 mm, total height: 2,000 mm, overall weight: 250 kg, discharge height: 2,000 mm, power: 0.55 kW (0.75 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: GEMOTEG, Equipment: type plate available, Complete solution for conveying bulk material such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt incl. substructure Horizontal area 2,500mm Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz Protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Shaft edge: 50x35mm 25 pcs. T-40 cleats - 396mm pitch 2-ply especially transversely stable Useful width: 290mm, results as follows: Queranordnung 70+35+290+35+70mm ONLY WHILE STOCKS LAST!!! All our prices are net prices plus VAT. Nwjdsrwi D Espfx Agrel - can also be viewed under power after consultation!

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) Nwjdpfx Aji Igdfsgrsl We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-FL25 Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to 5 (optional #000,5). The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! Nwsdpfxedy Dyfj Agrjl The small capsule filling machine SPT-FL25 for R&D and small general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 3 psc/h; Max.production quantity of capsules - 25 000 psc/h (by 1 segment hole); 17 000 psc/h (by 2 segments hole), 8 500 psc/h (by 1 segment hole). Weight of machine -700 kg; Space consumption - 900 x 1100 x 1700 mm

Condition: used, A complete sawmill machinery package is being sold as follows. Sale as a complete package is preferred, but individual items or reservations are possible! 1. Log infeed system, 2-strand Conveyor length: 5.5m Width: 2.8m 2. Rail car/cross conveyor, driven 3-strand Length: 4.0m Width: 2.55m Track gauge: 1.85m 3. Tensioning car, Mayrhofer with auxiliary car Track gauge: 90cm 4. Circular sawmill, Möhringer Model: OSS75 Year of manufacture: 1991 Stroke: 500mm Frame length: 750mm with drive motor with saw guide with saw blades with hydraulic saw tensioner with splitting wedge, Möhringer 5. Driven circular log transfer system Length: 9m Width: 1.4m Roller width: 1.2m 6. Spiral log transfer system Length: approx. 6m Width: 1.2m with lift for boards 7. Log transfer system Length: 14m Width: 1.1m Roller width: 0.85m with spiral log transfer system Length: approx. 7m Width: 1.1m Roller width: 0.85m 8. Cross conveyor, 4-strand Conveyor length: 2.3m Width: 4.2m 9. Double edger, Paul KME2 with cut-off saw with templates with saw blades with drive motor with sawdust extractor with length sorting 10. Cut-off saw, Stihl with rail car 11. Circular saw sharpening machine, Vollmer CABG 12. Circular saw tensioning machine, RIVO GSA 13. Circular saw sharpening machine, Vollmer CNE (2 units available) 14. Forklift, Manitou MSI 50, year of manufacture 2002 with accessories 15. Wheel loader, Manitou / Ahlmann AL85t, year of manufacture 2001 Nedezb A R Hspfx Agrewl with accessories

Condition: like new (used), functionality: fully functional, Roller shutter - extrusion die set - complete, die head with heating element and calibration tool * die connection currently for Weber CE7 but other mounts available on request - double strand 2x 5m/min - roller shutter cover width 52mm - fully retracted Nwedpoxgpbbsfx Agrsl - includes mounting plate (as shown) to fit on calibration table

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 750 kW (1,019.72 HP), Drying Technology Title: Multi-material Dryer + Boiler Condition: Used – Very good condition Description: For sale: multi-material dryer Brand: Gerdes System with perforated moving floor Moving floor driven by electro-hydraulic power unit 3 levels 2 fans per level (6 fans in total) Control cabinet with high-performance PLC Temperature sensors for each level Blockage detector LASCO wood chip boiler 750 kW Fully automatic Remote monitoring Ash screw conveyor and automatic ash removal Fire protection flap Complete package sold with various accessories (screws, conveyors, etc.) - Hydraulic power unit - Material receiving bin - Belt conveyor - Rotary screen - Auger elevator for feeding the dryer - Reclaim auger under the dryer - Trough screw conveyor - Filling chamber and wood chip storage tank for the boiler - Chip receiving bin and screw conveyor Nodsyyddgopfx Agrjwl - 2 control cabinets - Various spare parts (pipes, clamps, electric motors, filters, cyclone, etc.) To be seen on site. Excellent working condition. Also for sale: KAHL pellet press, complete installation with bagging system. More information on request.

Condition: used, Electric chain hoist, electric lifting mechanism, YALE crane, type 5-10/10-5 Serial no. 8526, year of manufacture 1979 Load capacity: 1000 kg Hook travel: 3 meters Lifting speed: 5 m/min Fine lifting speed: 1.3 m/min 2 load strands = 1000 kg Power supply: 380 volts, 50 Hz - Suspension eye at the top of the crane Nwsdpfx Agod Rnr Tjrsl - Control pendant with buttons for main lift and fine lift in good condition

Condition: used, Electric chain hoist, electric lifting unit, DEMAG crane, type DKES 2-200 K V2 DI with Dematik BUS control via crane control system Factory No. 61456646, Year of manufacture 2003 Load capacity: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min Fine lifting speed: 0.20 m/min Chain size: 4.2 x 12.2 mm 1 load strand = 200 kg - with DKES2/5 500V control logic - without crane operating control - Dematik BUS control via crane control system - without trolley Mains connection: 400 volts, 50 Hz Nedpegd Ipnofx Agrowl Rated power: 750 W Rated current: 2.4 A in good condition