Used Striebig Striebig Automat Trk 6220 Av Panel Cutting Saw for sale (42,072)

Condition: used, machine/vehicle number: 007538, Max. panel width: 4300 mm Bdsdpfx Ahsuwzupjmjh Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor Bsdpov Iccfofx Ahmedh

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Circular saw unit, 0° - 46° swivel, maintenance-free, Saw blade diameter: 250-550 mm Maximum cutting height: 200 mm Saw blade spindle: 30 mm Undertable extraction: 120 mm Parallel fence with fine adjustment Fence ruler length: 1200 mm, can be swiveled Extension table: 1250 x 650 mm Cutting length: 2800/3200 mm Crosscut fence: 3200 mm, can be swiveled 90-45°, 2 fence jaws Kappa 550 control with programmable angle and height positioning, automatic cutting height correction during swiveling. 3-line LED display for height, angle and speed SD Circular saw table extension up to 1620 mm behind the saw axis, aluminum anodized On/off switch on the sliding table Panel saw sliding table: 3200 mm, anodized Swiveling mechanism for extension table Cutting width: 1250 mm Upper guard cutting width: 1250 mm Extraction connection: 100 mm Electrical system: Kappa 550, 3x400V 50Hz CE, 10 kW S6 with star-delta starter 3 speeds: 3000/4000/5000 rpm Quick overview Location: Flörsheim Availability: short notice Bdjdez Dyfcspfx Ahmoh

Condition: used, Year of construction: 2015, machine/vehicle number: AE/034366, functionality: fully functional, power: 6.6 kW (8.97 HP), input voltage: 380 V, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, saw blade diameter: 380 mm, total length: 3,800 mm, total width: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used SCM SIGMA IMPACT 90 panel saw, year of construction 2015. Best Price: SCM SIGMA IMPACT 90 – CNC Panel Saw / Beam Saw Year of manufacture: 2015 Serial number: AE/034366 Condition: Used Technical specifications Cutting dimensions: 3, 800 × 3, 200 mm Bsdez Dw Unjpfx Ahmodh Main saw motor: 9 HP / approx. 6.6 kW Scoring saw motor: 2.5 kW Main saw blade diameter: 380 mm 3 front air-cushion tables 17" touchscreen Control software: SCM WinCut 12 Cutting optimization software: Ottimo Cut Top+ / Easy Cut CE compliant Professional CNC-controlled horizontal panel saw suitable for cutting chipboard, MDF, plywood and other panel materials. Machine is still functional and available for inspection in Latvia.

Condition: good (used), Year of construction: 2002, functionality: fully functional, FULLY AUTOMATIC SAW WITH AUTOMATIC LOADING TECHNICAL DETAILS Specifications Bdedpfxevk R S Ho Ahmjh Manufacturer OMP Model 370 CM PP CNC Year 2002 Condition Used

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Bdedpfx Aofg E H Eshmjh Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Bdodsxtxg Hepfx Ahmoh Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 1992, Second-hand machine Year of manufacture: 1992 Features and technical specifications: - Saw blade diameter 300 mm - Saw blade speed 4,750 rpm Bjdpfx Ahozk Nnvemodh - Motor power 4.5 kW - Motor speed 2880 rpm - Max. cutting width: 5,300 mm - max. cutting height: 2100 mm - max. panel height: 2200 mm - max. machining thickness: 80 mm - with small-parts support - Dimensions: approx. 6,500 x 1,300 x 2,880 mm - Weight: approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, machine/vehicle number: 008546, Max. panel width: 2200 mm Max. panel length: 3800 mm Main saw blade projection: 123 mm No of Grippers: 7 Bjdpfxezq Uraj Ahmsdh

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Bdedpofg Ewzsfx Ahmeh Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Bodpfez Ehvxsx Ahmsdh

Condition: used, machine/vehicle number: 007470, Max. panel width: 3800 mm Max. panel length: 2200 mm Bdsdpot H Twaofx Ahmsh Main saw blade projection: 130 mm No of Grippers: 7

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Bdsdjd Iip Aepfx Ahmoh Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation Bsdpfx Ahod Iipzsmjdh • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: good (used), power: 4 kW (5.44 HP), saw blade diameter: 315 mm, saw blade bore: 30 mm, total length: 6,200 mm, total width: 1,000 mm, total height: 2,800 mm, overall weight: 800 kg, Equipment: saw blade guard, stationary panel saw HOLZHER, model 1215, max. cutting length 5200 mm, max. cutting height 2200 mm, max. cutting depth 80 mm. Bodpfxez E A Ipj Ahmedh

Condition: excellent (used), Year of construction: 2017, Bala DPM KS vertical panel saw in excellent condition Manufacturer: Bala Model: DPM KS Year of manufacture: 2017 Power: 3 kW, 3×380 V / 50 Hz Bdsdpfxez E Hkbo Ahmjh Motor speed: 3000 rpm Main saw speed: 5800 rpm Scoring saw speed: 7800 rpm Max. cutting thickness: 50 mm Max. vertical cutting height: 2100 mm Max. cutting length: 6100 mm Blade size: Ø250 × 30 × 3.2 mm, Z80 Machine dimensions: approx. 6030 × 2980 × 1150 mm Weight: 850 kg Feed: manual Panel lift: pneumatic/automatic system Dust extraction: integrated

Condition: new, cutting diameter 360 mm saw band length 5050 x 41 x 1,3 mm cutting width 1,3 mm cutting speed 15-100 m/min total power requirement 4 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0x 2,6 x 2,2 m The X-SMART 4 ??is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Other features include: 4 kW drive motor with 41 mm saw blade width Modern 7" touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation Bdsdpfjwg Sflex Ahmeh 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device; MMS and roller conveyors

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bsdpfjzzb I Njx Ahmedh Yorick Diebels

Condition: used, machine/vehicle number: 005255, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm No of Grippers: 7 Bdodpfxsg E Tcxj Ahmoh

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) Bdodpfod Iiprjx Ahmjh • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: used, Year of construction: 2024, machine/vehicle number: 0-341-87-0182, operating hours: 1,354 h, total length: 6,080 mm, total width: 4,950 mm, total height: 1,940 mm, Used panel saw, available for inspection while in operation. ▪️Labeling software ▪️Manual label printer ▪️Stress-free cutting/ripping program (cutting cycles, stress elimination, reduced waste) ▪️tapio ready Bdjdpfxozu Nyte Ahmeh Transportation is the responsibility of the buyer.

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,900 kg, For sale: a very well-maintained Martin T74 panel saw. Features a touch-screen control panel, 5.7 inches. Cutting angle, height, and width are controlled electronically. Bodpfxozrmhie Ahmjdh Motor: 5.5 kW. Saw blade change: quick-change system PRO Lock. No scoring saw. Slider length: 3000 mm. Max. saw blade diameter: 500 mm. Max. cutting height: 170 mm. Cutting width with fence: up to 1,100 mm. Saw blades up to 400 mm in diameter can be fully lowered below the table surface. Weight: 1,900 kg. Technical data sheet is available in the machine images (last image).

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Bdjdpfx Aez Erw Hjhmjh Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: used, Year of construction: 2016, operating hours: 3,625 h, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Weight: 7.200 kg Bdodsx R A Ufjpfx Ahmeh Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Operating hours: 3625 - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), KASTOmicut U 2.6 – Semi-Automatic Pivot Frame Bandsaw incl. Long Roller Conveyor For sale is a heavy-duty, semi-automatic pivot frame bandsaw KASTOmicut U 2.6. The machine features infinitely variable cutting speed and is ideally suited for all cross-cutting and mitre tasks (-45°/+60°) on pipes, profiles, and solid materials in workshop environments. The fully hydraulic saw feed and hydraulic material clamping enable semi-automatic, sensitive, and tool-preserving sawing operations. — Features • Hydraulic saw feed • Rotary table as material support • Hydraulic material clamping • Infinitely variable cutting speed • Mitre cuts to both sides from +60° to -45° — Technical data • Dimensions (L × W × H): 760 × 1620 × 2040 mm • Material support height: 950 mm • Total weight: 510 kg • Total power: 2 kW • Cutting speed: 20 – 110 m/min • Saw band dimensions: 3,180 × 27 × 0.9 mm • Saw band guides: Side and back roller guides, replaceable • Material clamping: Mechanical • Saw feed: Hydraulic, continuously adjustable • Saw band tension: Mechanical • Saw band cleaning: Fitted with a replaceable wire brush — Cutting capacities • 90° round (solid/pipe): 160 / 260 mm • 90° flat (W × H) (pipe): 310 × 260 mm • 90° square (solid/pipe): 160 × 160 / 260 × 260 mm • +45° round (pipe): 220 mm • +45° flat (W × H) (pipe): 200 × 200 mm • +60° round (pipe): 140 mm • +60° flat (W × H) (pipe): 140 × 140 mm • -45° round (pipe): 240 mm • -45° flat (W × H) (pipe): 200 × 260 mm • -45° square (pipe): 210 × 210 mm • Minimum remnant length: 30 mm — Condition & Delivery The machine is in perfect working condition and ready for immediate use. • Shipping on a pallet by freight forwarder possible Europe-wide • Additional machines available – check our listings for more offers — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Bedjxizabopfx Ahmjdh