Used Suwmiarka Traserska 2000Mm Holex for sale (579)

Condition: used, Technical details: band width: 135 mm conveying height: 1020 control voltage: 380 V weight of the machine approx.: 165 kg dimension machine xH: 3,3 x 0,5 x 1,5 m Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm Nsdpfx Aeu Nuqujkujwg -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20mm -Discharge length (D) 200mm -Discharge height above floor (C) 1020mm -Discharge width 200mm -Insertion length/underfeed length (A) approx. 2000mm -Insertion height (B) 180mm Operation via manual switch Rotating scraper brushes at the discharge and on the left/right side of the infeed beam *

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm Njdpou Nvmqefx Akuswg column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *

Condition: used, Year of construction: 1966, Technical details: Nwsdpfxou Id Dbo Akueg bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m Nsdpjvc Avbsfx Akujwg chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Year of construction: 2022, condition: used, Colour: Silver Empty weight: 800 kg Dimensions (LxBxH): 480 x 200 x 240 cm - Year: 2022 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4329 - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Main fan [pcs]: 2 - Main fan power [kW]: 7.5 - Number of filter bags [pcs]: 5 - Filter length [mm]: 1100 - Filter diameter [mm]: 520 - Filter surface area [m²]: 9 - Connection diameter [mm]: 520 - Number of connections [pcs]: 5 - Transport dimensions: 4800mm x 2000mm x 2400mm (l x w x h) - Transport weight [kg]: 800kg Njdpfx Aey Tlpkskuowg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Baling press, Schleicher, 16 S – used - : Nwjdpfsyzcwhex Akuog Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Operating manual not available.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Genox K2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Twin 75kW drive motors (2 x 55kW & 2 x 110kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Njdpfx Akjy Rpx Rjuowg Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor length: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW combined motor power (110kW & 180kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Njdpfxsy Rpvve Akuowg Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: used, Work table packing table workbench adjustable height with wooden top and drawer container RA1800 Work table made of metal, painted white, used wooden worktop (traces of wear) height adjustment manually by crank Dimensions: width: 2000mm depth: 640mm height: 840 - 1020mm (adjustable) Drawer container with 4 drawers of different heights Container in 2 different colors (turquoise and blue) Arrangement of containers partly on the left, partly on the right Container dimensions: 400 x 650 x 600 mm (WxHxD) Heights drawers: 1x 50mm, 2x 150mm, 1x 300mm More than 50 tables available! Nedpfxsk Abdwj Akuewg All prices net, plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 Nwsdpfxsk Abb Us Akusg The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2010, condition: ready for operation (used), Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement. Nwodpfsy T N Iwjx Akujg

Condition: ready for operation (used), Center distance: 2000mm, center height: 280mm, swing over bed: 560mm, swing over gap: 785mm, swing over carriage: 350mm, bed width: 350mm, spindle bore: 105mm, spindle speed range: 25-200/ 200-1500rpm, longitudinal feed range: 0.059-1.646mm/rev, cross feed range: 0.020-0.573mm/rev, metric threads: 0.2-14mm, quill diameter: 75mm, quill travel: 180mm, quill taper: MT 5, motor power: 7.5kW, length: 3340mm, width: 1150mm, height: 1460mm, weight: 2.72t. Equipment: 3-axis digital readout ES-12 V with LCD display, 3-jaw chuck PS3-315mm / D8, max. steady rest passage diameter: 180mm, max. follow rest passage diameter: 120mm, foot pedal with brake function according to CE, protective device for quick-change tool post, LED machine light, initial filling with Shell Tellus 46, two center points, frequency inverter, digital speed display, slip clutch, rapid traverse longitudinal and cross, coolant system, quick-change tool post with 4 holders, change gears, reduction sleeve, chip splash guard, operating tools. An on-site inspection is possible. Nodpfey Tx Nwjx Akuowg

Year of construction: 2009, condition: ready for operation (used), Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible. Njdpfey Tx Rnsx Akuswg

Condition: good (used), functionality: fully functional, Crosscut saw KP-500 AUTOMAT Nwsdpjtt R Amofx Akueg input conveyor 5200mm output conveyor 2000mm motor 7.5 Kw

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Nodpoy Tn Ntofx Akuowg

Condition: excellent (used), For sale: complete German-made measurement kit for diagnostics and machine setup, ideal for service, production, and inspection applications. The kit includes: • ROTUX Pocket Strobe™ stroboscopic lamp • Operating range: 30 – 12,500 FPM (flashes per minute) • Built-in display and adjustment dial • Battery powered (ANSMANN charger included) • Original case with foam insert Additionally: • HOLEX dial indicator 0–10 mm, accuracy 0.01 mm • NOGA magnetic base with adjustable arm • Set of adapters and holders • Mounting elements and cables • All components in excellent technical condition, from a working workshop Manufactured in: Germany Condition: very good, complete set, not worn out ⸻ Nodpfjupuk Hex Akujwg Ideal for service technicians, precision mechanics, or for monitoring rotational movement, shaft alignment, vibration, or synchronization in drive systems. The ROTUX lamp is a professional tool, not a Chinese replica.

Condition: used, Year of construction: 1998, functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. Nedpowgd Rgsfx Akuswg LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: ready for operation (used), A universal milling machine is offered. Travel paths X/Y/Z: 400mm/400mm/400mm, table clamping surface X/Y: 700mm/460mm, tool holder: SK40, speed range: 31.5rpm - 3150rpm, control system: CNC (Deckel Dialog 4). Equipped with vertical milling head, angle table, machine vise, coolant system, splash guard tray. Weight: approx. 1650kg, overall dimensions X/Y/Z: approx. 2000mm/1600mm/1900mm. Inspection possible by arrangement. Nwsdpfoy Tav Sox Akueg

Condition: used, Year of construction: 1994, total length: 3,400 mm, total width: 2,000 mm, total height: 1,500 mm, Colour: Grey Weight: 1.200 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 94-11-240 - Main motor power [kW]: 5.5 - Roller table length [mm]: 3200 - Table width [mm]: 1450 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Electrically adjustable axes: Scoring unit height - Manually adjustable axes: Tiltable, Cutting height - Options: Digital readout, Scoring unit - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 44.8 Njdsy Smc Aepfx Akuswg - Voltage [V]: 415 - Current consumption [A]: 13.5 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 3400mm x 2000mm x 1500mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, total height: 2,000 mm, total length: 3,000 mm, total width: 1,800 mm, Empty weight: 4.000 kg Price: On request Driven tools included Barfeeder included - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HT23372E Nwodpjwqf I Uefx Akuog - Drive system: CNC - Control system brand: Yasnac - Power [kW]: 15.0 - Centre height [mm]: 230 - Swing over bed [mm]: 450 - Distance between centres [mm]: 380 - Spindle bore [mm]: 59 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 5000 - Options: Bar feeder, Live tools - Transport dimensions: 3000mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, total length: 5,900 mm, total height: 2,000 mm, total width: 1,300 mm, Empty weight: 7.500 kg Price: On request Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Nwedpsxz Du Sofx Akujg Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, HEIDENHAIN LB 302 - glass scale Total = 1x LB 302 4640mm Nedpfxey Sulro Akuowg 2x LB 302 ML 2000mm 2x LB 302 ML 320mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Laser power: 40000w/30000w/22000w/20000w/12000w/6000w/3000w Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 4000mm*2000mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. Nwodpfx Akeg Db Ufsujg

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. Njdpfjfcqtcsx Akuowg -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

Condition: used, Year of construction: 2001, operating hours: 6,023 h, total height: 2,500 mm, total length: 3,500 mm, total width: 2,000 mm, Empty weight: 5.000 kg Price: On request - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 00600169 - Operating hours: 6023 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18-M - Power [kW]: 15.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 1020 Nwodpfoyk Hbnex Akueg - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 510 - Table length [mm]: 1150 - Table width [mm]: 500 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: Chip conveyor, External cooling, Tool magazine - Transport dimensions: 3500mm x 2000mm x 2500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum