Used Sw Ba 35 Cnc for sale (23,874)

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Gusdpfew Dufiex Abfef *

Condition: excellent (used), CNC rotary table MRD 3500x3500 Max. load – 100 tons Automatic weight balancing system Double rack and pinion. Longitudinal travel 2500mm Feeds: 0.45-4500 mm/min. Rapid traverse – 4500mm/min Continuously adjustable rotation speed: 0.000129 – 1.29 rpm. Godpfxofx Syzs Abfeuf Revolution speed – 1.29 rpm.

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe / FW, Adjustable machine reamers, 11 pieces -Diameter: Ø 35 to 65 mm -Recording: MK3/MK4 -Submission/Price: complete -Transport dimensions: 520/400/H80 mm Gjdpfx Aezd R Ecjbfsuf -Weight: 27 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 5,060 h, load capacity: 3,500 kg, lifting height: 5,080 mm, free lift: 1,640 mm, fuel type: electric, mast type: triplex, construction height: 2,475 mm, fork carriage width: 1,310 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Gsdey Et Daepfx Abfeuf Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 775Ah Battery manufacturer: 86% remaining capacity Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, non-marking tires.

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure reciprocating compressor with associated pressure vessel and control cabinet Type: QTOX 120/65/35 WM-W Maximum final pressure: 66 bar Volumetric flow rate: 50 m³/h Rated power: 18.5 kW Rated speed: 1450 rpm Voltage/frequency: 400/50 V/Hz Year of manufacture: 2000 Maschinen- und Behälterbau GmbH High-pressure vessel up to 65 bar Type MB 00320-2.10 1000 liters Year of manufacture: 2017 Guedeki Tzuspfx Abfsf

Condition: ready for operation (used), Bosch CNC CP / MEM 5 / G107 / 913572 CPU module, SN:001028510, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gjdpfxsx Eqxbo Abfsuf

Condition: ready for operation (used), Bosch CNC CP /MEM 5 / G107 / 913572 CPU module card, used, in good condition, 100% functional, scope of delivery as per photos. Gjdex Eqxhopfx Abfsuf

Condition: used, mileage: 500 km, power: 110 kW (149.56 HP), first registration: 04/2021, fuel type: electric, overall weight: 4,250 kg, color: white, gearing type: automatic, number of seats: 3, total width: 2,170 mm, total height: 2,960 mm, loading space length: 3,420 mm, loading space width: 2,050 mm, loading space height: 1,920 mm, Year of construction: 2021, Equipment: ABS, central locking, ORTEN Electric Trucks E 35 Deep Freeze Box Body Pricing includes consideration of subsidies. Technical Data Chassis: Manufacturer: ORTEN GVWR: 4,250 kg (Driver’s license class B) Wheelbase: 3,745 mm Tires: 185/75 R 16C Paint: White, similar to RAL 9003 Technical Data: * Maximum speed: 85 km/h * Range: approx. 150 - 200 km * Battery: Lithium Iron Phosphate (LFP), nickel and cobalt free * Battery capacity: 80 kWh, 400V / DC * Charging connector: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 volts / 22kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 92 kW nominal power * Torque: 410 Nm *Note: The range may be reduced depending on: * Driving behavior. * Weather conditions. * Road conditions. * Duration of use of auxiliary equipment, heating, air conditioning, refrigeration unit. ORTEN Lightweight Deep Freeze Box Body, Type TK 36 K Technical Data: Internal length: 3,420 mm Internal width: 2,050 mm Internal height: 1,920 mm External length: 3,605 mm External width: 2,170 mm Wall thicknesses: Roof: 100 mm Front wall: 100 mm Side walls: 60 mm Rear doors: 80 mm Floor: 103 mm Floor assembly: 150 mm high aluminum subframe. Self-supporting, multi-layer insulating floor, 103 mm thick, with high-strength epoxy resin surface, non-slip. Side walls: Side walls in sandwich construction, 60 mm thick. Front wall: Front wall in reinforced design to accommodate a refrigeration unit, 100 mm thick. Roof: Roof in reinforced design to accommodate a ceiling evaporator, 100 mm thick. Rear doors: Stainless steel portal frame. Double-wing rear doors, 80 mm thick, fittings in stainless steel design. Safety lock with emergency release from inside. Hinge door latch in stainless steel. Side door on the right: Single-wing side door on the right front, approx. 1,800 mm x 900 mm, internal stainless steel door lock. Hinge door latch in stainless steel. Load securing: 2 rows of airline tie-down rails mounted on the side walls. 4 pieces of load securing bars. Parking bracket for load securing bars on the upper rear portal. Refrigeration: High-performance refrigeration unit and ceiling evaporator, Carrier Xarios 600 with data logger. Electric auxiliary drive with inverter and control software to operate the refrigeration unit while driving. Separate mains connection 32A to operate the refrigeration unit when stationary with external power connection. Cooling capacity: Fresh: 0 °C / 30 °C Deep freeze: -20 °C / 30 °C Heating: 3950 W Air circulation: 2350 m³ / hour Noise level: 55 dB, quiet!!! Accessories: Gedoht Swkjpfx Abfjuf Water drain in the floor front left and right, incl. sealing rubber. Base strip, aluminum anodized, 300 mm high, all around. Sliding cold curtain on the rear and side doors. 2 pieces of LED interior lighting with motion sensor, flush-mounted. LED outline lights, 2 x front, 2 x rear. LED additional brake light. Fixed entrance step at the rear across the entire body width. Plastic mudguards for the rear axle. Splash guards. Side marker lights. Side underride protection. Vehicle acceptance test according to § 13 EG-FGV. Weights: Chassis with ORTEN deep freeze box body: approx. 3,250 kg Payload at GVWR 4,250 kg: approx. 1,000 kg (Driver’s license class B) Leasing examples ORTEN Electric Trucks E 35 Deep Freeze Box Body: 89,900.00 EUR Net purchase price 60-month term Calculated residual value 25,000.00 EUR 1,380.00 EUR monthly payment

Condition: new, mileage: 500 km, power: 70 kW (95.17 HP), fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2023, * CityRollup superstructure * All-aluminum body with Segemental roller doors * 2 compartments à 2,057 mm + 2 compartments à 1,320 mm * Dekra certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf spring ORTEN Electric-Trucks E 35 with roller shutter body: Pricing taking into account the subsidies Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driving license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats 1+2 * Gear ratio rear axle i = 4.1 * Stabilizer rear axle * Front disc brakes * Rear drum brakes * Airbag driver * Fog lights * Heat-insulating glass Gjdsqz R Dmspfx Abfjuf * Luxury driver's seat * Central locking * Electrically adjustable exterior mirrors * Storage compartments left and right front doors * Multimedia 2DIN with USB connection * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chock with bracket (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color graphite black * Wheel rims color silver * Warning triangle * First aid kit * Hazard warning lights * Operating instructions Technical data of the conversion: * Maximum speed: 85km/h * Range: approx. 200km * Battery: Lithium iron phosphate (LFP) Nickel and cobalt free * Battery capacity: 80kWh, 400V / DC * Charging plug: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70kW / Peak 92 kW * Torque: 410Nm / Peak 730Nm Technical equipment: Regenerative braking power * 22kW On Board Charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS- CAN-BUS-controlled charging technology * Electric 5kW HV cab heater * Color display, shows all relevant battery, BMS, engine and control data * Diagnostic menu for engine control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Stainless steel construction elements * HV 400 Volt / DC battery heating system (only in charging mode) * Vehicle approval § 13 EG-FGV / ECE R100 ORTEN City Rollup body Assembly dimensions: Total length: approx. 3,600 mm Floor inclination: 0 mm Total height: approx. 2,360 mm Width of the bay: front 2057 / rear 1320 mm Total width: approx. 2,200 mm Height of the bay: 1575 mm Aluminum roller doors: Roll-up with spring support. Rubber band for pulling down the roller doors. In the closed position, the doors are secured centrally by a locking handle, which is mounted on both sides of the front wall and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each bay, welded to prevent goods from sliding against the door Underride guard: Original chassis underride guard is used Rear wall: Fixed rear wall. Double-walled with aluminum planking with smooth surface. Paintwork: Body painted on the outside in RAL ? color. Lettering can be applied as specified at an extra charge Side steps: The side underride guard is formed by steps with an anti-slip surface for the driver. Steps along the bodywork on both sides of the vehicle, between the axles and behind the rear

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized, lightweight box bodies for new or used low-frame chassis in various body lengths. The body and interior fittings are always individually adapted to your specific needs, from function to design. We manufacture ourselves and in Germany. Our many years of experience and our comprehensive service offer you a great deal of flexibility in implementing your idea. Each project has its own ID with us. Gedpfxef D Rdto Abfjuf VW Crafter 2.0l 2011 Euro5 3500 kg First registration: 21.12.2011 Mileage: 92,300 km Fuel: Diesel kW/PS: 100/136 Manual transmission, 6 gears ccm: 1,968 cm³ The sales body is NEW, unused and features a large sales flap across the entire vehicle width, 2 seats, driver's license class B, rear step, LED lights, reversing camera. Box body made of 25 mm GRP sandwich panels, superlight, with an alcove. Rear door, single-leaf, 700 x 2000 mm. Floor made of non-slip industrial flooring R11. Exterior lighting: LED, in accordance with the Road Traffic Act and EU regulations. Interior dimensions LWH: 3800 x 2250 x 2300 mm Side flap WxH: 3570 x 1480 mm Permissible total weight: 3,500 kg Unladen weight: 3,065 kg Interior fittings are NEW!! Left side: Commercial refrigerator with glass door and forced air cooling Base cabinet for countertop appliances with sliding door, 2-burner gas stove 8.5 kW, smooth gas griddle 8 kW, double gas fryer 2 x 8 L 12.5 kW, electric bain-marie 2 kW, wall-mounted hood 2200 incl. extraction, grease drain, flame protection filter, heat protection panel and lighting, gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas line and gas inspection. Right side: Serving table with sliding doors and stainless steel worktop, cash register station 900 with folding cover, 254 L double sink with storage including fresh and wastewater tank, boiler Chalkboard with wooden frame, LED illuminated Additional equipment: Storage space above the sales flap, folding bag storage at the sales opening. 2 LED panels on the ceiling and 3 LED spotlights above the sales counter, dimmable. Plenty of storage space. Standard electrical installation 380 volts/16A, connection socket according to CEE standard, RCD circuit breaker, 16 amp fuse with inspection, 5 double sockets, hygiene package, fire protection package. Price net: 63,920.00 € plus 19% VAT Errors and prior sale excepted.

Condition: used, mileage: 13,854 km, power: 92 kW (125.09 HP), first registration: 05/2012, fuel type: electric, empty load weight: 2,735 kg, maximum load weight: 1,265 kg, overall weight: 4,000 kg, axle configuration: 4x2, fuel: electricity, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The vehicle was converted to electric at 108,564 km. Total mileage: 122,418 km Manufacturer: Bosa Type: LF150 450V Capacity: 40KW/H Range: 100km The used Iveco Daily 35 S11 C30C ELEKTRO was converted to electric drive in August 2021 by Orten Electric Trucks. With a Bosa LF150 450V engine and a battery capacity of 40 kW/h, the vehicle offers a range of around 100 km. Its total mileage is 122,418 km, with the conversion taking place at 108,564 km. The vehicle has a summer box body with built-in shelves, air suspension at the rear and a rear view camera. Gjdpfxot Syuij Abfeuf With an output of 92 kW/125 hp and an automatic transmission, the yellow van is ideal for commercial use. The vehicle measures 6,783 mm in length, 2,177 mm in width and 2,770 mm in height. With a permissible total weight of 4,000 kg, it offers sufficient capacity for various transport needs. Viewings are possible without registration and a registration service is offered. Sold only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 1,415 km, power: 92 kW (125.09 HP), first registration: 10/2011, fuel type: electric, empty load weight: 2,735 kg, maximum load weight: 1,265 kg, overall weight: 4,000 kg, axle configuration: 4x2, fuel: electricity, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2011, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The vehicle was converted to electric at 110,485 km. Total mileage: 111,900 km Manufacturer: Bosa Type: LF150 450V Capacity: 40 kW/h Range: 100 km Guodpfxjugn E Do Abfsf The Iveco Daily 35 S11 C30C electric conversion from December 2021, carried out by Orten Electric Trucks, is a used electric van with extensive modifications. The conversion was carried out at a mileage of 110,485 km, and the vehicle has now covered a total of 111,900 km. Equipped with a Bosa electric motor, the van has an output of 92 kW and a range of approximately 100 km. The battery capacity is 40 kWh. The yellow van features a Sommer box body, built-in shelving, rear air suspension, and a rearview camera. A jump seat is also available, and various loading options are available. It offers a gross vehicle weight of 4,000 kg and a spacious cargo area, making it ideal for commercial use. The electric conversion makes this vehicle an environmentally friendly alternative in the commercial vehicle sector. Viewings are possible without prior appointment during business hours. Sale only to businesses (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 13,408 km, power: 92 kW (125.09 HP), first registration: 11/2012, fuel type: electric, empty load weight: 2,735 kg, maximum load weight: 1,265 kg, overall weight: 4,000 kg, axle configuration: 4x2, fuel: electricity, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, total length: 6,840 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,850 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The used Iveco Daily 35 S11 C30C electric vehicle was converted to electric drive in December 2021 by Orten Electric Trucks. The van has a total mileage of 113,858 km and was converted to electric drive at 100,450 km. It is powered by a Bosa LF150 engine with a capacity of 40 kW/h, enabling a range of up to 100 km. Gedpov A Akrefx Abfeuf The vehicle boasts a variety of practical features, including a Sommer box body, built-in shelving, rear air suspension, and a rearview camera. A jump seat is also included. With its exterior dimensions of 6,840 mm long, 2,220 mm wide, and 2,850 mm high, it offers plenty of space for commercial use. The trunk supports various loading options. It is a vehicle with an automatic transmission, producing 92 kW or 125 hp. The gross vehicle weight is 4,000 kg. The vehicle's general inspection is valid until February 2025. The van was first registered on November 18, 2012, is yellow, and has one previous owner. Viewings are possible Monday to Saturday without prior appointment. Manufacturer: Bosa Type: LF150 450V Capacity: 40 kW/h Range: 100 km Conversion to electric drive by Orten Electric Trucks 12/2021 Vehicle equipped with a jump seat. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 4,744 km, power: 100 kW (135.96 HP), first registration: 04/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1001. 5446704 ----EQUIPMENT - ISOLI aerial work platform - AdBlue tank 20l - Driver airbag with seatbelt tensioner - Exterior mirrors electrically adjustable and heated - Battery 105 Ah Gusdpfsyt Uiljx Abfef - Passenger bench seat with three-point seatbelt - Diesel particulate filter - Rev counter - First aid kit - Electric windows, left and right - Generator Eco-Smart 3080 W 14 V x 220 A - Transmission: 6-speed manual gearbox - Interface - Headrest for driver's seat - Fuel tank 70 l - Crankcase ventilation - Paintwork: solid color - Manual headlight range adjustment - Model designation on both sides - Upholstery: fabric - Wheels: steel rims 6.5 J x 16 H2 - Rear window in cab - Rear wall trim in cab - Power steering - Front mud flaps - TFT color instrument cluster display - Trailer socket preparation - Maintenance indicator - Electronic immobilizer - Tinted windscreen and side windows in cab - Central locking with remote control ... and much more. ----The vehicle is in unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale reserved. We are happy to consider your vehicle in part exchange. Financing / leasing also available with no down payment! Do you have further questions? We are happy to advise you!

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Godozdwfiopfx Abfeuf Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line Gsdpfx Abownz Apsfsuf User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: new, Included in delivery are 100x double web closure, brand new for 35 mm webbing Material color: sendzimir galvanized Total length: approx. 83 mm Total width: approx. 54 mm inner width: approx. 35 mm material thickness: approx. 4,00 mm breaking load: 1.600 Kg Weight | Piece: 0,090 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately Gujdpfxspuz I Ss Abfsf depending on the delivery location or scope of delivery can be requested from us.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Guedpfozi Ah Hjx Abfof Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: used, mileage: 196,919 km, power: 103 kW (140.04 HP), first registration: 10/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Equipment: * Body/Superstructure: Fresh goods box van. * Air conditioning * Front passenger double bench seat * Rear wing doors without glazing * Document holder (smartphone/tablet) * Reinforced rear axle (suspension) * Fuel tank: 90 liters Body/Conversion: Fresh goods interior fit-out * Webasto Diavia frigo 4000 * 2 rows of anchor rails * No stationary cooling Technology: * Radio * Reversing camera * USB port * Electrically adjustable and heated exterior mirrors * Cruise control including speed limiter Safety/Environment: * Driver’s airbag * Brake assist * Driver assistance system: Adaptive load control * Low emissions according to Euro 6d standard * Engine start/stop system Other features: * 1 previous owner * Model update * Engine: 2.2 L – 103 kW * Wheelbase: 4035 mm * General inspection valid until 12/2027 * COC papers available Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always offers around 200 vehicles from the segments vans, commercial vehicles, and construction machinery! We continually offer attractive financing options at favorable special conditions. If interested, we will be happy to provide a customized quote! Gusdpfxjylrh Nj Abfof Trade-in of your commercial vehicle or construction machine is welcome. If a new main inspection (TÜV) is desired, we will gladly provide a quote from our partner workshops. Our offer is generally WITHOUT new main inspection. Delivery of your "new" commercial vehicle is possible via our external partners at an additional cost. The information in advertisements, on the Internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed properties. The seller accepts no liability/warranty for typographical or data transmission errors. Listed features may be subject to separate verification. Errors and prior sale reserved.

Condition: used, Year of construction: 2014, operating hours: 7,080 h, Tel.: call (Contact · Telephone · Mobile · WhatsApp) * Kubota KX 41 - 3 V * Mini excavator * Kubota engine, * Model D902-E3 or D902BH etc. * 3 cylinders * Displacement: 898 cc * Power: 12.7 kW * 17 hp * with quick coupler * 2 digging buckets * 1 ditch cleaning bucket * 1 hydraulic hammer * KM 100 Gjdpfx Abowu Rrtsfeuf * Adjustable width of rubber tracks * Operating hours: 7080 * Year of manufacture: 2014 * Net price * All information provided without guarantee

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm Gsdpfoyvvpmjx Abfjuf speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW

Condition: like new (used), mileage: 400,000 km, Year of construction: 2021, IVECO DAILY 35-21, year 2021, EURO 6, 3.0 engine with 210 HP, wheelbase 3450 mm, suitable for body lengths from 3.50 to 3.90 m, automatic transmission, LED headlights, reinforced leaf springs, 400,000 km mileage. Financing or leasing available on site. Benito: 3383844139, Michele: 3394588233. Gujdpfx Abjym Da Hsfef

Condition: used, functionality: fully functional, power: 95 kW (129.16 HP), fuel type: diesel, color: orange, operation weight: 16,000 kg, tire size: 315/70 R22,5, Year of construction: 2014, operating hours: 10,800 h, Equipment: adjustable boom, air conditioning, centralized greasing system, quick-change device, rear view camera, Atlas 150W mobile excavator Year of manufacture: 2014 10,800 hours 95 kW Deutz engine OQ65 SW, fully hydraulic Approximate weight: 16,000 kg All lines/hoses Adjustable boom Gjdpozbb Ecsfx Abfsuf Air conditioning Camera Central lubrication system Tires: 315/70 R22.5 (wide) Track width: 255 cm

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Gedpfx Aey Tbf Isbfjuf Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. Gedpfjvl Eahjx Abfsuf The machine is inspected, serviced and ready for work.