Used System For Chip Processing for sale (57,053)

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Ljdpfx Aieyuu Sceqeag Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Lajdpfx Aezunvasiqog Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: used, UHV deposition system (ebeam sputter) UHV deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit is removed Cryopump and prepump is removed Loadlock: for samples round 75mm Incl. sample heater 450l/s turbomolecular pump (Leybold) Proceschamber: Size: Width 680mm x Height 750mm x Depth 590mm Incl. shielding Double oring door (partially pumped) Heaters Basepressure low 10-7mbar, high 10-8mbar Electronics: Baseline cabinet (e-beam unit removed) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Ljdpfeuhcn Nox Aiqoag Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 55.000,-

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Lasdpjv Da Dlefx Aiqjg - Cooling jacket & bag system for optimum beer preservation

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 201 S PVC ORTA KAYIT ALIŞTIRMA ( SERİ BIÇAK DEĞİŞTİRMELİ), • Robust mechanical structure capable of processing PVC profiles with high precision • Intermediate profile adjustment for PVC profiles within an angle range of -45 / +45 degrees • Easy blade set replacement system • Easy angle adjustment with mechanical supports • Adjustable support system for all types and brands of profiles Lajdpfx Aiszd Nyfoqjg • Cutting speed adjustment with a hydropneumatic system • Blade storage rack (for 3 blades) • Max. processing diameter: 160 mm • Max. blade size: 200 mm • Min: 90 mm

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. Lajdpfjy I Tq Sex Aiqog All equipment is connected and can be inspected in operation to see the full production process.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Laedpfoxu Ewzex Aiqog Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: S120598-5-10, STOPA Storage System – 66.15 m Length – 850 Pallet Positions – Year 2014 – Excellent Condition We are offering for sale a high-performance industrial pallet storage system by STOPA, serial number S120598-5-10. System specifications: - Total system length: 66.15 meters - Total pallet positions: 851 - Actual usable pallet positions: approx. 500 - Platform dimensions: 3000 x 1500 mm per level - Number of towers: 33 Lajdpfxow Eb N Do Aiqeg - Pallet slots per tower: 29 - Loading/unloading stations: 11 - Minimum required installation ceiling height: 9.4 m - Year of manufacture: 2014 - Condition: Very good – clean, maintained The system is currently disassembled and stored indoors at a warehouse in Piaseczno, Mazowieckie, Poland. Live demonstration is not possible, but the system was fully functional at the time of disassembly. Complete technical documentation is available. Loading and transport assistance can be provided. Reason for sale: change in warehouse layout concept. This is a premium solution for companies seeking to expand or modernize their pallet storage capacity with a reliable, high-capacity system. For further details, photographs, or to arrange an inspection, please contact us.

Condition: good (used), Year of construction: 2019, machine/vehicle number: N500003, Manufacturer: DJM Model: COEX 4 Year: 2019 Condition: Used Laodsy Ia U Repfx Aiqjg Serial Number: N500003 Stock Number: 3365 Diaphragm: 4 pieces Capacity: up to 100 strokes/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Laedpfx Asx I Rfaeiqeg Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Lajdpfox I Rfgjx Aiqeg Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Lajdjyvv Trspfx Aiqjg Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Ledpfx Aijzvp Uysqsag

Condition: new, PRICE: 5000 EUR Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Ledpfxjvtz U Ro Aiqoag Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Laedevtzzkepfx Aiqeg Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 Lasdpfeq Igyvsx Aiqeg # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04111010, We offer this very good Albo System AB AS1000 pile turner, year of construction 2005. Manufacturer: Albo System AB Model: AS1000 Construction year: 2005 Condition: very good Lasdpfx Aozu R Tneiqsg Category ID: 672 Type: Pile turner If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle Lodpfoydh Agex Aiqoag transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: used, Suitable for steam heating capacity 1.600L. all stainless steel double jacket tiltable drum stirring system with spring-mounted scrapers high pressure steam (max. 10 bar) Lasdpfx Ajz Ahdmsiqeg dimensions (l x w x h): ± 4.000 x 2.000 x 2.300 mm + "Berief" Loader for 200L eurobins, Type L25

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2021, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,780 mm, loading space volume: 94 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,790 mm, color: yellow, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors - Lifting axle - Air suspension - Disc brakes - Sliding roof = Notes = Very nice Krone Profi-Liner tarpaulin semi-trailer (year of manufacture 03/2021) with RSAB system (snow protection system, prevents the roof from sagging in case of snowfall), KRONE axles with disc brakes, ABS/EBS, 1st axle = lifting axle, pallet box, sliding roof, rear doors, Multilock, 3 supports per side with 28 aluminum planks, internal dimensions 13.62 x 2.49 x 2.78 m, tires 385/65-R22.5 (L: 10/7/15 mm; H: 11/13/8 mm), unladen weight: 6,500 kg, permissible total weight: 39,000 kg, Dutch registration with valid main inspection (APK) until 11.03.2027 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: Krone DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lifting axle; Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 70% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 45%; Tire tread right: 80% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 95%; Tire tread right: 50% Weights Unladen weight: 6,500 kg Payload: 32,500 kg GVW: 39,000 kg Functional Body brand: Krone SD Sliding roof: Yes Condition Technical condition: very good Optical condition: very good Laedpfx Aijz Air Ejqsg Further Information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total height: 3,500 mm, total length: 20,000 mm, total width: 2,500 mm, overall weight: 12,000 kg, Equipment: documentation/manual, The Modesta exhaust system is in good condition, is still installed, and can be seen in operation. It includes two automatic diverter valves, allowing you to choose whether to discharge into the bunker/silo or into two containers. Lajdpfx Aisx Ezlfsqsg

Condition: used, mileage: 233,849 km, power: 368 kW (500.34 HP), first registration: 06/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x6, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, navigation system, power assisted steering, seat heater, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Folding exterior mirrors - Passenger seat - Roof spoiler - Driver's cabin - Remote central locking - Heater - Automatic climate control - Leather interior - Tow hitch - Hub reduction - PTO - Radio - Reversing camera - Sun visor - Differential lock - Spotlights - Blind spot mirrors - Tool box = Notes = AJK HL20-6430 Hooklift system 20T 6.43 m VOLVO FMX 500 6x6 HUB REDUCTION 220,000 km Work remote Dynamic steering Like new!! = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Laedpfsznyqpjx Aiqjg Rear axle 1: Tire size: 315/80R22.5; Double tires; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inside: 20%; Tire tread depth left outside: 20%; Tire tread depth right inside: 20%; Tire tread depth right outside: 20%; Suspension: Air suspension Weights Unladen weight: 16,860 kg Payload: 10,140 kg GVW: 27,000 kg Interior Upholstery: Leather Financial Information Price: On request Identification Model number: FMX 500 / 6X6 / AJK HOOKLIFT 20T = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: excellent (used), dimensions 579 x 760 x 1800 filter area 15 m2 0.9 kW 1470 Pa Ledpfx Aijz Alm Seqoag 900 m3/h

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 01 Crumbler, type of input current: three-phase, year of last overhaul: 2026, working width: 1,800 mm, roller length: 1,400 mm, CPM PELLET 855 CRUMBLER Model 855 DA Manufactured in 1988 Rated capacity of 20 tons per hour. Consisting of the following: 2 x 11 kW, 1800 RPM, 3-phase, 440V motors Lasdpfoz Aryxox Aiqsg 8-inch diameter x 55-inch long chilled cast iron rolls.

Condition: excellent (used), mileage: 462,901 km, power: 302 kW (410.61 HP), first registration: 10/2017, fuel type: diesel, tire condition: 50 %, axle configuration: 8x2, wheelbase: 6,100 mm, fuel: diesel, color: white, driver cabin: day cab, emission class: euro6, number of seats: 2, total length: 8,550 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2017, = Additional options and accessories = - Power take-off (PTO) - Sun visor = More information = General information Cab: single Registration number: 66-BJT-5 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Lift axle; Max. axle load: 8000 kg; Steering Rear axle 2: Max. axle load: 11500 kg Rear axle 3: Lift axle; Max. axle load: 7500 kg; Steering Weights Empty weight: 12.675 kg Carrying capacity: 23.425 kg GVW: 36.000 kg Max. towing weight: 50.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. Laedpezucx Aefx Aiqeg All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email: