Used Vertical Stack Delivery With Pressing And Marking for sale (43,740)

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW Bsdpfx Ashy Nx Eod Aelg 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: good (used), Europress by CK. press force 30 t. Bale weight 280-320 kg Bodpfx Adsycw Ebs Aslg

Condition: good (used), Verical baler with 30 t press force Bledeycw Dwspfx Ad Aog

Condition: good (used), Year of construction: 2008, functionality: unexamined, This is a pressing roller / stacker / bander delivery typically used off the back of a folder. This unit is completely self-driven so can be used in conjunction with any Standard Horizon, MBO, Stahl or other make folding or special application machines. The pressing unit squeezes air from folded signatures to ensure a very tight fold, then can be batched in any amount desired. This unit has an end sheet/board feeder that works with batch counter and inserts end sheets or board at the front and back of each batch before banding. Banding is performed with a nylon strap that is sealed by thermal pressure. Blodpfx Adexz Tbuo Aog

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Bsdpfsrl U S Ejx Ad Aolg Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: new, V13.5mm for 1-2.5mm bending V38mm for 3-6mm bending Bljdpfsldc U Rjx Ad Ajg

Condition: excellent (used), functionality: fully functional, conveyor belt length: 870 mm, conveyor belt width: 240 mm, total length: 1,200 mm, total width: 450 mm, total height: 1,020 mm, input voltage: 220 V, Reed conveyor belt Bledpfx Adjxwpw Rj Aeg

Condition: like new (used), Miwe condo 80x60 stonefloor oven with steam function in good working condition if you have further questions please sent an request Bodpsumm Nvjfx Ad Ajlg

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer Bjdpfxetqmwgj Ad Aolg

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Blodoyw Tkwspfx Ad Ajg Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Year of construction: 2019, condition: used, functionality: fully functional, Used decorative galvanizing line NICKEL CHROME The line consists of 19 tanks with dimensions 3m x 1.2m x 1.4m (4.5 tons) 1 dryer with 2 motors 2 transformers 12V–15V, 1200A 1 transformer 12V–15V, 4000A 1 oil transformer 2 pumps with voltage of 400V (three-phase) and power of 1.5 kW Included with the galvanizing line is a plant for DEMI water production. If needed, we can also offer a water treatment (purification) line. Bodpoy Hcmtsfx Ad Ajlg

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. Blsdpfx Adeh U Nvke Aeg MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Blodou Dahnepfx Ad Asg Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. All other machinery also available including Vemag multi head filler and several blast freezers. Bjdpfx Aoyxfmyjd Aslg

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. Bledpfxjyug R Rs Ad Aog The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA Bsdpfxsyug Hxe Ad Aslg • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Bsdjtqmvrepfx Ad Aolg

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Bjdpswnriasfx Ad Aslg Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Blsdpfx Adex Ik Dco Aog Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Beam on: 17,540 h Laser on: 45,508 h Bodpfx Asyyyiled Ajlg

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Bjdpeyyygksfx Ad Aolg Frequency: 50 Hz Power: 3,200 W

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Bjdjyzt Nzspfx Ad Aelg Price is for the entire unit.

Condition: used, Year of construction: 1986, functionality: fully functional, We are offering this used Brenta Vertical Band Saw with automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type Progress 750 Machine no.: 409621 S268 N1143886 Maximum cutting length: 12 meters Bledoyxhq Uopfx Ad Aog In the various photos, you can see: - overall view of the saw - saw machine nameplate - saw with extraction pit - automatic line behind the saw - pit under the lower wheel - infeed line from outside - infeed line as seen from inside - outfeed line inside - extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain - collection bin behind the outfeed line - collection bin seen from the other side. With red button operable both here and from the machine room - overview of the outfeed line - machine plate of the saw carriage - saw carriage in the outer position, where the log can be loaded - control room behind the saw - control room interior. Electronic measurement setting and control of all infeed and outfeed lines - wall-mounted electronics across from saw. Control current with relays, which can also be operated manually - Atlas Copco GX 11 FF compressor - Compressor nameplate, year of manufacture 2005 - Grass Air DW 31 air dryer - Stellite adjustment blocks for the guides where the saw blades run through Technical information: - The machine must be supplied with air, hydraulics, and electricity (including control current) - The wheels (upper and lower) were ground approximately three years ago and can last for many more years. - Infeed conveyor control cabinet was renewed in 2025 - At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment. This Brenta vertical band saw with automatic turning carriage is an excellent combination. The listed price is based on the EXW Incoterm, with dismantling by the buyer. If you have any questions or require further information, please feel free to contact us or give us a call.

Condition: excellent (used), functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 25,410 kg, overall weight: 36,910 kg, axle configuration: 3 axles, first registration: 01/2008, suspension: air, tire size: 385/65R22.5, color: silver, Year of construction: 2007, Equipment: ABS, tail-lift, For sale: Professional livestock semi-trailer by Gray Adams, model GAdd3T/4, year 2007. The trailer has seen little use, is fully operational, has undergone a recent inspection, and is ready for immediate operation. =====•••••===== NOTICE! Option to purchase the entire set together with the 3-axle tractor MAN TGX 28.480 (6x2 drive), which the trailer was paired with. 2014 MAN model with extremely low mileage—only 268,000 km! Well-maintained, continuously serviced, ready for operation, Euro 5 standard. The tractor is equipped with a spacious, comfortable cab, leather seats, two beds, coffee maker, and electric sunroof. Price for tractor unit only: €12,900 net Discounted price for combined set: €45,900 net We offer delivery of the entire set to any address in the EU or to a port under preferential conditions! =====••••===== Gray Adams specialist trailers are robust and reliable designs, engineered for transporting cattle, horses, and other livestock. A new trailer of this type cost over 900,000 DKK (~600,000 PLN net ≈ €130,000), reflecting the high build quality and durability of the Gray Adams brand. =====•••••=====•••• Technical data – trailer: Brand/Model: Gray Adams GAdd3T/4 Year of manufacture: 2007 – in service since 2008 Transport dimensions: 13.6 m (L) × 2.55 m (W) × 4.0 m (H) Unladen weight: 11,500 kg Payload: 25,410 kg Gross vehicle weight (GVW): 37,000 kg Axles: 3 axles (including 1 steering axle) Suspension: air suspension Landing legs: JOST Tires: 385/65 R22.5 (approx. 60% tread) Brakes: disc brakes – components (S-cams) replaced in June 2021 Certification: CE Design and purpose: - Two-deck trailer – ideal for transporting larger quantities of animals - Full hydraulic system – safe and convenient operation - Remote-controlled hydraulic aluminum lift - Integrated water system – ensures optimal conditions for transported animals - Durable build and materials ensuring longevity Technical condition: - Trailer rarely used, maintained in very good condition - Regularly serviced – all maintenance performed promptly Bedpfoxc Hzqox Ad Aslg - Fresh inspection – fully roadworthy and ready for use =====••••===== Additional equipment: - Remote-controlled hydraulic lift - Integrated watering system - Complete documentation and CE certificates - High-quality components (JOST, pneumatic system, disc brakes) - Metallic paintwork =====••••===== Why choose this offer? - Top brand: Gray Adams – world leader in livestock trailer manufacturing - Durable and reliable construction – designed for intensive use - Recent inspection – guaranteed operational status - Very competitive pricing compared to a new unit (over 900,000 DKK!) - Ideal solution for livestock breeders, farmers, and transport companies

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Height range: Production capacity: up to 3000 c.p.h. No. of heads: 18 Tooling for approx. 52 mm (202) Bledpfx Aeyv An Aed Asg Filler and seamer available separately or together