Used Victor Taichung Sprite 400 Hs 300 Rpm for sale (39,765)

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Insulation class: F Duty cycle: S1 Condition: Bwedpfxozncq Sj Ahmju 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: as good as new (ex-display), Year of construction: 2025, - Mobile scissor lift table with a metal sheet platform - The lifting function (up/down) is operated via a hydraulic foot pump - Load capacity: 300 kg - Overall height: 400 mm Bwedpfefnp Rpsx Ahmeu - Lifting stroke: 610 mm - Maximum height: 1010 mm - Platform size: 1000 x 600 mm - Weight: 75 kg - 2 swivel casters with brakes, 2 swivel casters without brakes - Wheel diameter: 125 mm - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: used, adjustable gearbox, variable speed gearbox, spindle adjustment gearbox Bwjdoupbc Nepfx Ahmeu -Manufacturer: GUSA Gensheimer, adjustable gearbox type SK 25 without drive -Speed range: n2 0-300 rpm at n1 1500 rpm -Drive motor: can be supplied at extra cost -Shaft diameter: 15 x 28 mm / 17 x 35 mm -Total dimensions: 300/200/H140 mm -Weight: 14 kg

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Weight: approx. 7000kg Bwedexcvgiepfx Ahmju Dimensions: 4210x2350x2600 (LxWxH) For further information such as positioning accuracies, see last image!

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Bjdpfx Aszqbk Nohmowu

Condition: excellent (used), WEBO – an industrial multi-spindle drilling machine with four independent heads. This machine is designed for serial drilling of multiple holes simultaneously, which significantly increases production efficiency. Each head has its own drive and adjustable height and rotational speed. Technical specifications: Bjdpezkmfxefx Ahmowu * Manufacturer: WEBO * Number of heads: 4 * Number of spindles: 4 * Motors: 4 × Siemens * Power of one motor: 0.75 kW * Power supply: 220/380 V * Spindle speed: 200–3000 rpm * Speed adjustment by changing the belt position * Stable, heavy cast iron construction * Condition: used, functional

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP Bwsdpfx Aex Hx T Ashmsu MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Year of construction: 2005, condition: excellent (used), MIKRON HSM 400 U High-Speed Machining Center The exact scope of the offer can be found in the photo series. It includes, among other things: measuring probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, band filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Working area X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: +-110° C-axis: 360° Spindle Speed range: 100 – 42,000 RPM Tool interface: HSK E 40 Spindle power at 40% duty cycle: 13 Spindle power at 100% duty cycle: 10 Torque at 60% duty cycle: 4.25 Torque at 100% duty cycle: 3.2 Lubrication: Oil/air Feed rate Rapid traverse speed: Max. 40 m/min Bwjdjigrf Iepfx Ahmou B-axis: 150 RPM C-axis: 250 RPM Axis acceleration, XYZ: Max. 1g (10 m/s2) B-axis: 100 rad/s2 C-axis: 300 rad/s2 Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Work table: 120 mm Max. workpiece diameter that can still be rotated 360°: 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control system: Heidenhain iTNC 530 Weight: 5500 kg We do not guarantee the accuracy, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Bodpfx Ahozzknxjmswu Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. - 1500/3000rpm. Bodpfx Ahov T Tq Romowu - 380V.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 66342/1B, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, conveyor belt speed: 50 mm/s, total height: 2,100 mm, input voltage: 480 V, input frequency: 60 Hz, For sale is a high-quality Schuma incline conveyor from the professional PRO-WAA series. Thanks to its robust construction, this belt is ideal for continuous industrial operation. Technical data: Manufacturer: SCHUMA GmbH Model: PRO-WAA 800/2000/400/300/S20 Serial number: 66342/1B Year of manufacture: 2023 Voltage: 480 V Frequency: 60 Hz Power: 0.18 kW Bodjy Ec Uzspfx Ahmewu Dimensions & geometry: Overall width (belt): approx. 400 mm Horizontal length (lower): approx. 800 mm Incline section (length): approx. 2000 mm Horizontal length (upper/discharge): approx. 300 mm Cleat height: 20 mm (S20) – ideal for small parts, granulates, or plastic components.

Condition: good (used), Year of construction: 1990, used brushing machine with wacuum table Bwsdpfxjd Tanyo Ahmeu

Condition: good (used), Geared motor, electric motor, electric geared motor -Electric geared motor: for crane cable reel -Features: External fan, no brake -Speed: 3.7 rpm -Power: 300 Nm Bsdpfx Ascxq Alehmewu -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Quantity: 1x motor available -Price: per piece -Dimensions: 760/260/H300 mm -Weight: 51 kg

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Bwedpfxolz Rvlo Ahmju Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Bedpfjyv Uvxjx Ahmewu Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Condition: used, Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine type: Hydraulic press Year of manufacture: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table area: 2,000 × 1,550 mm Ram area: 2,000 × 1,540 mm Front opening: 2,000 mm Side opening: 1,050 mm Table height: 800 mm Rapid traverse: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Pulling cushion: no Equipment: Complete DREHER strip system DREHER strip unwinder DREHER strip feeder DREHER strip conveyor system Hydraulic die cushion with parallel movement Hydraulic roll blocks Tool changing consoles Siemens SIMATIC control panel Bwjdpfxezrz D So Ahmeu Note: The system is currently running at a slow speed but has no significant damage. We will gladly send you videos of the machine in operation upon request.

Condition: good (used), Year of construction: 2020, DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor Bwsdpfxeyxcmqs Ahmsu -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Bjdpfxjydpz Dj Ahmowu

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Bjdpfozwcncex Ahmewu Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: used, Gear motor, electric motor Bwedpscquc Aofx Ahmju -Speed: 40 rpm -Power: 0.8kw -Construction: B3 -Diameter shaft: O 28 mm -Protection class: IP 44 -Number: 1x available -Dimensions: 410/190/H260 mm -Weight: 26kg

Year of construction: 2023, condition: used, Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible. Bwjdpjzxhlvofx Ahmju

Condition: excellent (used), For sale: VEM electric motor in industrial version. The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Dimensions: Flange diameter: approx. 300 mm Bsdpfx Ajyv Uuzshmewu Shaft diameter: approx. 38 mm Condition: Used Signs of use Visible corrosion on parts

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for both manual and robotic processing, used for polishing parts made of aluminum, steel, brass, and zinc die-cast. Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Dust extraction connection: Ø 100 mm Bodpsc Rfg Uefx Ahmewu Dimensions (L x W x H): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Connection power: 4 kW Height to polishing spindle adjustable to customer requirements Made in Germany Warranty: 12 months Optional: Extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control, 1 main switch.

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 We can organise shipping / delivery for you. Bwodpey Rvfqofx Ahmeu

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: SEW-Eurodrive, Servomotor Permanent Magnet Motor Bwjdpfxjm Sk Hvs Ahmju -Type: CFM71L/TF/RH1M/SM50 -Speed: 0 - 3000 rpm -Voltage: 400 V -Shaft: Ø 19 x 35 mm -Technical data: see photo of the type plate -Number: 3x servo motors available -Price: per piece -Dimensions: 350/117/H190 mm -Weight: 11.8 kg/pc.