Used Viet Calibrating / Sanding for sale (2,863)

Condition: used, Year of construction: 1987, Edge grinding machine Manufacturer: Rehnen Type: R1 Year of manufacture: approx. 1987 Technical data Bdsdpfx Afozuzddewsg Work table: 1100 x 500 mm Grinding belt: 2280 x 150 mm 3 kW main motor 6.4 Amps Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Calibration grinding machine Manufacturer: Lingi Jianzhong Type: BSG2613C Year of manufacture: 2019 Technical data - Maximum working width: 1300 mm - Processing thickness: 5-80 mm - Processing length: 780 mm - Processing accuracy: 0.08 mm - Dimensions of the grinding belt: 1350x2800 mm - Grinding belt speed: 31 m/s - Roller diameter: 2x 320 mm - Total power: 165 kW - Main motor power: 2x 75 kW - Feed motor: 11 kW Bsdpfx Afezuzc Towsdg - Lifting motor: 2x 0.75 kW - Brush motor: 2x 0.75 kW - Feed speed: 10 - 30 m/min - Operating air pressure: 0.5 - 0.8 MPa - Volume of the dust extraction container: 24000 m³/h - Weight: 14.5 t - Overall dimensions: 3100x2100x3000 mm - Voltage: 380V 50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data Bdedpozuzctjfx Afweg - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 Bdodpfx Afozuzb Aewog - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, WE OFFER AN NICE TWO BELTS WOOD GRINDING MACHINE OPERATIONAL WIDTH 1100 mm MACHINE RUNS IN DAILY PRODUCTION AND IT IS IN VERY GOOD WORKING CONDITION FOR CUSTOMER WE ORGANIZE SHIPPING WORLDWIDE Specifications Manufacturer CB - CALIBRO LEVIGATRICI SATINATRICI Model 2IIRT1100 2M Year 2000 Bdjdpfxsvkx Uco Afwjg Condition Used

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Bdodpsx Twcpefx Afweg

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Bedpfxey Dd Igo Afwsdg Location: Nattheim

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Location: Nattheim Bjdpfxjzd Hngj Afwjdg

Condition: excellent (used), 4 kW motor Roller feed system Sanding belt length: 100 cm Working height: 14 cm Bdjdpfx Ajzu Ng Tjfwjg Table with adjustable angle and height

Condition: used, Year of construction: 1996, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm Bdedeyyyhujpfx Afweg - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg

Condition: used, Year of construction: 1991, - Manufacturer: Fladder - Model: Gyro 300 Vacuum - Working width: 1300 mm - Year of manufacture: 1991, good condition - Flex Trim sanding heads - Quick-change sanding media - Sanding media grit: K240 - Sanding media length: 45 mm with support brushes - Abrasive slits: 20 and 5 mm - Number of brush heads: 6 - Rotating and oscillating sanding unit - Motor power: 5 kW - New frequency inverter for the conveyor belt - With vacuum conveyor belt Bjdpfxjzia Nne Afwedg - Feed rate: continuously adjustable from 2 to 8 m/min - Length: 2070 mm - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Location: In stock, D 32825 Blomberg - Volts, Hz: 400 / 50 - Can be tested in Blomberg

Condition: used, Year of construction: 2014, Equipment: Bjdpfx Afexrb Rfswodg - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 1998, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 - Max. brush width: 1,300 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm - Feed rate 3-15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION Bdedozubpaepfx Afwog - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Condition: used, Year of construction: 2001, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled Bedpfxsxtakmj Afwedg - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Bsdpfsxd Avtex Afwsdg

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Bedstk Rwtopfx Afwjdg

Year of construction: 2004, condition: ready for operation (used), A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible. Bodpfjt Amc Uox Afwjdg

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Bdodpfx Afew Duvhoweg

Year of construction: 2005, condition: ready for operation (used), Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible. Bdsdpsyrtamefx Afwog

Condition: used, Year of construction: 1991, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 290-02-1819, total length: 2,670 mm, total width: 1,500 mm, total height: 1,200 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 380 V, space requirement width: 1,800 mm, space requirement height: 2,000 mm, space requirement length: 5,000 mm, Edge sander, capable of sanding profiled strips on the first unit; the second unit is for flat sanding, and the third unit has a brush. Bjdpozvy A Uofx Afwsdg

Condition: excellent (used), Catalog number: 8075 TECHNICAL DATA - Table length: 2200mm - Table width: 700mm - Main motor: 2.2kW - Manual beam lifting - Abrasive belt width: 160mm - Grinding head - Dust extraction nozzle diameter: 120mm - Overall dimensions (L/W/H): 3060x1240x1430mm - Weight: 250kg Bodpfezuk Huex Afwjdg ADVANTAGES – Made in Austria – Unpainted – Used sander, very good condition Net price: 6500 PLN Net price: 1548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Year of construction: 1991, condition: used, weight 240 kg Bdsdpjztfvbjfx Afwjg max 50 mm ja serial number 2035

Condition: used, Edge sanding machine Holzmann KOS2510, good condition, standard equipment, 2510 mm belt length, 150 kg Bdodpfx Afewzzf Rewjg Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data Bsdpfxeztxqfj Afwedg - Machine type: Edge sanding machine / oscillating belt sander - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm - Weight: approx. 165 kg Features - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Condition: ready for operation (used), HELD E90 Edge Grinding Machine -Motor power: 1.1 kW -Speed: 8,400 rpm -Support/stop surface: 800 x 50 mm Bdedpfx Afjztctkowog -Support length: 500 mm -Footprint: 550 x 500 mm -Suitable for deburring -Suitable for breaking edges -Suitable for chamfering Dimensions: L x W x H 0.5 x 1.0 x 1.0 meters / Weight 100 kg Errors and omissions excepted.