Used Villex Container Gmbh Mini Wood Pavillon 1.0 for sale (77,114)

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. 1 container is incomplete and is missing its fans and front grille assembly. Dcsdpfx Adoz Dxcmjren One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Condition: excellent (used), Huber & Ranner Air Handling Unit (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was used as a recirculating air unit for a paint booth and is in excellent, clean, and professionally maintained overall condition. The system controls the complete air climate (filtration, cooling, humidification, and air supply) and is ideally suited for production halls, paint shops, wood or metal processing, and large-scale industrial projects. Technical data of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System Reference: SPK ULA) Order Number: 19 0090 Z / P.010 Volume Flow / Air Capacity: 31,000 m³/h The modular components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: CU / AL (copper/aluminum) Refrigerant: R134a Highly efficient filter stage: Filter class: F9 / Standard (fine dust filter for the highest air purity) Filter type: TM 9U635A10-1 (Quantity: 9 pieces) Recommended final pressure: 250 Pa Djdpfx Aszrmctodrecn Humidifier & droplet separator module: For precise regulation of humidity, including an integrated droplet separator to prevent moisture transfer into the air duct. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic cutting (blade movement up/down) - sawing units adjustable at a 45° angle - manual adjustment of the sawing unit spacing - min. cutting length at 90° 220mm - max. cutting length at 90° 2820mm Dcedjzulu Topfx Adrsn - cutting width 110mm - cutting height at 90 degrees 90mm - 2 pneumatic clamping devices - control pedal - material support - main motor 2 × 1.6kW - dimensions (L/W/H) 3620x1100x1250mm - weight approximately 500kg - unpainted - tilting sawing units - used saw, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Dsdpfx Adez D Htgorjcn Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,000 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Villex Standard Cube Nero 1.0 – Robust, modern & versatile! The Villex Standard Cube Nero 1.0 from Villex Container GmbH is a high-quality 6.0-meter container that impresses with its versatile applications and contemporary design. Whether used as an office container, construction container, break room, living container, or storage solution, this container offers ample space and maximum functionality. The elegant anthracite-colored panels and matching base frame in RAL 7016 give the container an all-around sophisticated look. Inspection and collection possible by arrangement. HIGHLIGHTS & DATA AT A GLANCE * Model: Villex Standard Cube Nero 1.0 * Manufacturer: Villex Container GmbH * Condition: New & fully assembled * External dimensions: 6.00 m x 2.40 m x 2.60 m (L x W x H) * Weight: approx. 1,000 kg (easy to transport & flexible) * Color: Completely in modern anthracite (RAL 7016) * Insulation: 50 mm thick insulation for year-round use EQUIPMENT & ELECTRICAL * Door: 1x sturdy steel door (secure & durable) * Windows: 2x standard windows (1,000 x 1,000 mm each) for optimal daylight * Electrical equipment (complete package): * External connection: 32A CEE plug (power supply) * 3x double sockets Dodpezzpv Iofx Adrscn * 2x LED lights for perfect illumination * 1x light switch & fuse CUSTOM MANUFACTURING & SPECIAL REQUESTS POSSIBLE Do you need individual adjustments or additional equipment? We also manufacture containers exactly according to your specifications! DELIVERY & PAYMENT * Delivery: Nationwide delivery with our own special vehicles / crane truck * Delivery time: * In-stock standard models: approx. 1–2 weeks * Individual special order: approx. 4–6 weeks * Payment options: * PayPal * Bank transfer (advance payment) REQUEST A NON-BINDING QUOTE NOW! Get free advice! Call us or write to us directly via the classifieds – we will create an individual offer for your new container.

Condition: used, Year of construction: 2016, functionality: fully functional, Conveyor line / roller conveyor system / material handling system, material handling equipment, approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Conveyor line Condition: Used Year of manufacture: 2016 The system consists of: 1 x Inclined belt conveyor, approx. 3.2 meters long 2 x Pneumatic lifts 3 x 90° bends 2 x Folding elements / passage elements 1 x Control cabinet 25 pcs adjustable feet and the remaining conveyor belt / roller conveyor, approx. 34 meters Total length: approx. 50,000 mm Total width: 750 mm Djdpfx Adex Ala Eerscn Conveyor width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The material handling equipment was in operation until disassembly. Thanks to the excellent workmanship of the material handling equipment, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Condition: used, Year of construction: 2021, color: red, empty load weight: 4 kg, first registration: 12/2021, fuel type: gasoline, gearing type: other, USED OPEN-TOP ALUMINUM HOIST CONTAINER WITH REAR OPENING WITH 2 FOLDING DOORS + B.O.B. CRANE WITH 5-BLADE OCTOPUS WITH MECHANICAL ROTOR REF: 22-U-52 TYPE: bulky with crane NEW: no COVER: no OPENING: rear with two folding doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.00 m CASE LENGTH: 5.00 m + 0.80 m crane space + 0.20 m beams CASE EXTERNAL WIDTH: 2.50 m CASE INTERNAL / EXTERNAL HEIGHT: 2.00 m / 2.20 m BOTTOM FROM: 4 WALL FROM: in aluminum TR1 COLOR: aluminum CRANE DATA BRAND: B.O.B. R60 SEMREGISTRATION: 4069 C6 YEAR: 2000 LENGTH: 5.14 m max extension EXTENSIONS: 1 CAPACITY: 780 kg max at the tip The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Djdpfev Hidtjx Adrjcn Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 containers, containers with and without hook-lift cranes. S.E.&O Given the quantity of advertisements and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 Dcedez Hngmepfx Adren • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 052, turning length: 140 mm, turning diameter: 30 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 9,000 W, rotational speed (min.): 200 rpm, rotational speed (max.): 6,000 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 1,200 mm, type of input current: AC, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, Transco Drehautomaten GmbH Type (Typ): tc10 Serial Number (Nr.): 052 Year of Manufacture (Baujahr): 2023 Machine Category: CNC Automatic Lathe (Second Operation / Audrema® series) Maximum Part Length: 140 mm (120 mm shank + 20 mm head) Maximum Workpiece Diameter: 30 mm Production Rate: Up to 35 parts per minute Control System: Siemens CNC ControlMain Drive Power: Up to 9 kW Dcjdpfx Ajz Ih Hcedrsn Part Changing / Loading Times: Collet chucking (free drop): 1 s. Collet chucking (guided drop): 1.5 s. Three-jaw chucking: 2 s. Located in Israel l.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 700 kg, loading space width: 3,000 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, Villex Mini Cube Nero Are you looking for a flexible, high-quality, and immediately ready-to-use space solution? Our Villex Premium containers are in stock, fully assembled, and available immediately! Ideal as office containers, construction containers, living containers, sanitary containers, or containers for schools or kindergartens. Inspection and collection on-site are possible at any time by prior arrangement. HIGHLIGHTS & DATA AT A GLANCE Condition: New & fully assembled External dimensions: 4.00 m x 3.00 m x 2.60 m (L x W x H) Area: 12 m² Weight: approx. 700 kg Exterior color: RAL 7016 (anthracite / black) – modern look Interior color: Walls in white | Floor in stylish wood look Insulation / wall thickness: 50 mm sandwich panels (exterior walls) EQUIPMENT (STANDARD) Door: 1x double-glazed entrance door 2000x2000mm Window: 1x floor-to-ceiling window 2000x1000mm Electrical installation (surface-mounted PVC): 7x sockets Complete fuse system incl. RCD / fuse box Ready for immediate connection Dcodpfx Adezxp T Isrsn INDIVIDUAL CUSTOM REQUESTS Air conditioning can be optionally retrofitted / installed. Do you need a different size or special equipment? We will manufacture your desired container individually! DELIVERY & PAYMENT Delivery: Possible throughout Germany Delivery time for in-stock items: Approx. 1-2 weeks after order receipt Delivery time for custom-made products: Only approx. 3–4 weeks Payment methods: - Conveniently in advance via PayPal - Bank transfer INTERESTED OR HAVE QUESTIONS? Contact us today! We will be happy to provide you with a non-binding consultation on your project and prepare a suitable offer.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 24-042, overall weight: 200 kg, type of input current: AC, input voltage: 230 V, belt width: 400 mm, Magnet with neodymium head roller (can also separate slightly magnetized stainless steel parts), small conveyor belt (drum motor), and feed chute. Dcjdpfxoz Ihbgo Adrjn The conveyor belt and feed chute are adjustable. The machine is mobile on rollers, available immediately, and the price may be negotiable.

Condition: used, Year of construction: 2016, Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement. Dcodpez Irl Njfx Adrsn

Condition: used, Year of construction: 2024, machine/vehicle number: 211-11-01-23-02, total width: 1,070 mm, total length: 2,470 mm, total height: 1,850 mm, This E-bike motor test bench, type G4, manufactured in 2024 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: E-bike motor test bench EMEC G4, manufactured in 2024 Test bench for e-bike drives with two test levels in an aluminum profile enclosure with safety doors, including a mounted control cabinet and temperature control unit. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G4 Year of manufacture: 2024 Electrical power: max. 16.6 kW Connection power: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2470 x 1070 x 1850 mm Weight: 1200 kg, permissible total weight: 1350 kg As far as can be seen (information without guarantee): Both test levels appear to be constructed identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff air cooling kit Second servo motor with gearbox and fan unit, design presumably Beckhoff AM8053 (nameplate not visible) 2 torque measuring shafts Djdpfxoz Ngzcj Adrecn Test specimen mounting with ring holder on a carriage Linear guides with clamping levers for axial adjustment Heat exchanger behind the test specimen mounting Fan for test specimen cooling Connections for CAN, service, and auxiliary voltage (AUX) Additionally: Julabo 1200F refrigeration circulator with touch control unit Laboratory power supply EA-PS 9080-100 Control cabinet (as far as can be seen): Emergency stop, main switch, on/off button, front connections USB and RJ45, control cabinet fan Rollers and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition, as inspected, is decisive. Functionality not tested.

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months,  Control panel  5 cutting heads  The angle of the 5th head can be adjusted within a range of 270 degrees  5 feed and pressure rollers  Adjustable feed speed: 3 – 15 m/min  4 dust extraction points  Height indicator allowing for precise adjustment of the table and machine height  Width indicator allowing for precise adjustment of the timber dimensions  Infeed table with a length of 1.9 m and outfeed table with a length of 1 m Technical data CAPACITY  Four-sided planing • Maximum width 350 mm • Height range 10 - 160 mm  Two-sided planing • Planing width 410 mm • Height range 10 - 230 mm  Single-sided planing • Maximum width 510 mm • Height 230 mm TOP HEAD • Diameter 88 mm • Width 510 mm • Motor power 5.5 kW (7.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 20 mm BOTTOM HEAD • Diameter 72 mm • Width 410 mm • Motor power 4 kW (5.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 10 mm (15 mm drill) Dodozqzy Rspfx Adrecn SIDE HEADS • Spindle diameter 30 mm • Max. Knife height 160 mm • Max. Diameter 160 mm • Motor power 3 kW (4 HP) • Rotational speed 6000 rpm • Max. planing depth 30 mm ADDITIONAL HEAD • Spindle diameter 30 mm • Max. Knife height 130 mm • Max. Diameter 200 mm • Motor power 3 kW (4 HP) • Rotational speed 3000, 6000, 9000 rpm • Tilt angle 270 degrees

Condition: new, Eurotec Innovation TV25-M – Mobile Vibratory Finishing Machine / Trough Vibrator (Made in Germany) The TV25-M by Eurotec Innovation is a compact, mobile all-in-one solution for professional vibratory finishing – ideal for deburring, grinding, and polishing a wide variety of workpieces. Thanks to its well-designed system layout, all necessary components are integrated in a space-saving manner on a mobile frame. This makes the machine flexible to use and ready for immediate operation. Type: TV25-M TROUGH VIBRATOR Manufacturer: Eurotec Innovation GmbH Gross volume: 50 liters Advantages: ✔ Mobile complete system – all components integrated on a movable frame ✔ Plug & Play – simply connect to 230V and start ✔ Integrated process water treatment (cascade system) ✔ Screening unit for automatic separation of workpieces and media ✔ Sound-insulated design for quiet operation ✔ Programmable control with timer & frequency adjustment The U-shaped trough design allows the processing of larger and longer workpieces while maintaining a compact footprint. ⚙️ Technical Data: Gross volume: approx. 50 liters Effective volume: approx. 36 liters Internal dimensions (working container): Length: 600 mm Width: approx. 275 mm Height: 325 mm Power supply: 230V Power consumption: approx. 0.5–1.0 kW 🏭 Applications: Deburring of metal and plastic parts Polishing and surface finishing Processing of individual parts up to small batch production Ideal for industry, workshops, and contract manufacturers Ideal for: Dcedjhmp Dqjpfx Adron Metal processing Deburring & polishing Workshops & production The TV25-M is the perfect solution for companies looking for a flexible, space-saving, and immediately ready-to-use vibratory finishing system – maximum efficiency with minimal space requirements. Additional variants and custom configurations available upon request. From development to production, we supply all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Dedpfoznz Ezjx Adrecn Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: good (used), Year of construction: 1996, Rumed Type 3300 Refrigerated Incubator • Manufacturer: Rubarth Apparate GmbH, Laatzen (Germany) • Type: 3300 • Serial number: 72258.4 • Year of manufacture: 1996 • Power: 1.0 kW • Operating voltage: 230 V / 50 Hz • Current consumption: 4.4 A • Refrigerant: R134a • Filling weight: 0.99 kg • Permissible operating overpressure: 18 bar • Made in Europe, CE-marked Description & Applications: The RUMED Type 3300 is a professional refrigerated incubator for laboratory applications. Ideal for: • Microbiological cultures • Long-term storage of samples • Climate-controlled stability tests • Research and development Dodpfxjxl Awgs Adrecn Internal dimensions: W/D/H: 575/550/510 mm Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. Dcsdpfeyr Dawox Adron • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Dcedez Agv Uspfx Adren - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Dodpfx Aoz Agw Eedrscn - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Djdpez Ag Rrefx Adrscn - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Used, electrically heated stainless steel tank / transport container Last application: Chemicals Article number: 10908 Volume: 1000 L Type: Standing, in a stainless steel frame Material (in contact with media): 1.4301 / AISI304 Design: With electric heating Bottom: Arched Top: Arched Operating pressure according to nameplate: 0.30 bar Dcjdpoz Ixg Hofx Adrsn Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 200 mm Manhole: 400 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Equipment: Nameplate: Yes Outlet type: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 325 kg

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Dodpszqucfsfx Adrocn Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Dcjdpfxozz Rpco Adren - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2025, machine/vehicle number: 211-11-07-25-10, total width: 1,070 mm, total length: 2,500 mm, total height: 2,050 mm, This E-bike motor test bench, type G5, manufactured in 2025 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, and accessories." Further details: E-bike motor test bench EMEC G5, manufactured in 2025 Test bench for e-bike drives with two test levels (Rack 1 and Rack 2) in an aluminum profile enclosure with safety doors, including an attached control cabinet. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G5 Year of manufacture: 2025 Electrical power: max. 16.6 kW Electrical connection: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2500 x 1070 x 2050 mm Weight: 1150 kg, permissible total weight: 1300 kg As far as can be seen, the following components are installed (information without guarantee): Both test levels appear to be equipped identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff Air Cooling Kit AX2090 Dsdpfoz Nd N Dox Adrecn Beckhoff servo motor AM8053-0J1A-0000 (3.12 kW, 15.4 Nm, 2000 rpm) with gearbox and fan unit 2 torque measuring shafts Test specimen mount with protective bracket on a slide Linear guides with clamping levers for axial adjustment Fan for test specimen cooling Thermocouple connections (Type K) Connections for CAN, service, fan, and auxiliary voltage (AUX) Additionally: Laboratory power supply EA PS 10080-120 (0 to 80 V, 0 to 120 A) Control cabinet (as far as can be seen): Emergency stop, main switch, on/off button, CAN connection per rack, front connections 2x USB, DisplayPort, and RJ45 Forklift pockets, rollers, and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition as inspected is the decisive factor. Functionality has not been tested. Software and operating computer are not part of the lot unless expressly stated.