Used Visiontec Visiontec Füll- Und Etiketteninspektion Fill Level Inspector (2017) for sale (25,198)

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION Ndjdjz Dhrqspfx Agrjb * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Nodey Szcwepfx Agredb

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. Nsdpezlpv Aofx Agrjdb We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ Njdpfx Agezf E Dversdb - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; suitable for volumes from 100-1000ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 50-200mm; bag size: max. L50-250xW50-200mm; without air pressure; 220V, 1.95kW; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L1120xW920xH2050mm; weight: 500kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ndodov Nmzhopfx Agrjb

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; suitable for volumes from 20-100ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 30-150mm; bag size: max. L50-220xW30-150mm; without air pressure; 220V, 1.7W; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L790xW600xH1780mm; weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Njdpfxjv Nmy Rj Agrodb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; suitable for volumes from 50-500ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 30-100mm; bag size: max. L80-150xW30-100mm; without air pressure; 220V, 1.75kW; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L1120xW900xH1950mm; weight: 480kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nedpfx Agsv Nmzborsdb

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute; suitable for volumes from 10-50ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 30-80mm; bag size: max. L50-110xW30-80mm; without air pressure; 220V, 1.7kW; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L790xW600xH1780mm; weight: 400kg Ndodpfx Agsv Nmy Dereb That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute; suitable for volumes from 5-20ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 30-80mm; bag size: max. L50-110xW30-80mm; without air pressure; 220V, 1.7kW; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L790xW600xH1780mm; weight: 350kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Njdpfov Nmywjx Agrodb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Nodpfx Agjz D Hmmjrodb Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: good (used), functionality: fully functional, Year of construction: 2017, power: 0.8 kW (1.09 HP), load capacity: 240 kg, lifting power: 240 kg/m, platform length: 1,280 mm, platform width: 700 mm, overall weight: 880 kg, empty load weight: 880 kg, transport length: 1,300 mm, transport width: 760 mm, transport height: 2,030 mm, fuel type: electric, tire condition: 75 %, color: blue, maximum load weight: 240 kg, axle configuration: 2 axles, 🔧 Key Specifications: • Year: 2017 • Operating hours: On request • Machine width: 0.76 m • Drive system: 2-wheel drive (2 WD) • Drivable at full height: Yes • Platform extension: Yes • Power: 0.8 kW (24 VDC) • Working height: 5.60 m • Platform capacity: 240 kg • Power type: Electric • Type of battery: Lead-acid (2 × 12V) • Outriggers self-leveling: No • Platform size: 1.28 × 0.70 m • Tyres: Non-marking solid • CE certified: Yes • Machine weight: 880 kg • Indoor / Outdoor use: Both ✨ Highlights: ✅ Carefully selected from trusted sources with verifiable history ✅ CE certification and full documentation included ✅ Ready for immediate transport and operation ✅ Comprehensive technical documentation available ⚙️ Condition: Clean exterior, original paint, and well-maintained systems. Battery tested and in good condition. Available immediately from our Sittard stock. 🌍 Location & Delivery: 📍 Stored in Sittard, Netherlands 🚚 Worldwide delivery possible 💰 Price €4.500t (EXW, excluding VAT) Reliable first-owner machines with complete service history and expert technical support. Benefit from one of the largest European stocks of new and used equipment. CE certified, and ready for immediate use. Spare parts and professional assistance available upon request. 🚚 Delivery: Ndsdpsy E Hg Ijfx Agrob • Crane loading available on request for hassle-free handling at departure • Flexible dispatch options tailored to your destination and logistics preferences • All shipping handled professionally by Colle Rental & Sales logistics team

Condition: used, Inspection machine for detecting labelling errors, under- and overfilled bottles, and faulty closures. Defective bottles are diverted. The bottles passing through are also counted. The fill level is measured using gamma absorption. Additional title: Full-bottle inspection machine; years of manufacture appr. 1997 - 2008 Capacity max.: 30000 bo/h Power: 300 VA Voltage: 230 V Ndedpfx Aezg I Ndogreb Frequency: 50 Hz

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309b, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 125 mm, Ndjdpsz Db Tusfx Agrob

Condition: good (used), Year of construction: 2017, operating hours: 3,584 h, mast type: telescopic, color: green, General information Mileage: 39.208 km Drivetrain Make of engine: Nissan Weights Empty weight: 3.375 kg Functional Working height: 2.500 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 65 Rear tyres remaining : 65 Delivery terms: CIP, EXW Max. horizontal reach: 1900 m Latest inspection: 2026-05-01 Production country: DE Additional information Please contact Michael Overmeer for more information Njdpszh H Hqsfx Agrodb Klaas Theo 25 aerial work platform mounted on a Nissan Cabstar construction year 2017 with 3.584 hours and only 39.208 mileage. Last inspection at Klaas 05-2026. Machine is equipped with automatic leveling of the support legs and has a unique sideways range of 19 meters and a height range of 25 meters. Changes and typographical errors reserved.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Nsdsz Agv Uopfx Agredb - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: Nsdpoz Agw Esfx Agrodb - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: Nsdpfx Aez Ag Rrsgrsdb - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Nodpozl Rqhjfx Agrjdb Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Ndsdozdqrpepfx Agreb Cyclone air prefilter With quick coupler With 1 bucket

Condition: excellent (used), ZILLI & BELLINI 40-Piston Rotary Filling Machine – Stainless Steel Automatic rotary filling machine by ZILLI & BELLINI, equipped with 40 pistons, designed for volumetric filling of containers in high-production industrial lines for the food and canning industries. The machine incorporates a rotary filling system with 40 pistons, allowing for the continuous processing of multiple containers as they move along the carousel. This configuration provides an efficient solution for lines that require automatic, uniform, and high-capacity dispensing. Primarily manufactured from stainless steel, it features a robust industrial construction designed for continuous operation. KEY FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic rotary piston filling machine -Number of pistons: 40 -Volumetric filling system -Rotary filling carousel -Automatic and continuous operation -Automatic container handling -Automatic container infeed and outfeed -Transfer stars -Stainless steel construction -Robust industrial design -Suitable for high-production lines -Integrable into automatic filling and packaging lines -Designed for the food and canning industries APPLICATION The ZILLI & BELLINI is designed for continuous volumetric filling of containers using a rotary carousel equipped with 40 pistons. The containers are automatically transferred to the carousel, where they are positioned for dispensing. During the rotation, the piston system introduces the corresponding amount of product before transferring the filled containers to the next stage of production. The combination of 40 pistons and rotary operation is particularly interesting for facilities that require a continuous flow of containers and a high level of automation. It can be integrated with: Njdpozw At Eefx Agrodb Container feeders and conveyors Product feeding systems Can closing machines Cap feeders Weight checkers Inspection equipment Pasteurizers and autoclaves Labeling and coding systems Stacking and end-of-line equipment APPLICATIONS Especially suitable for canneries, vegetable canning manufacturers, sauce producers, ready-made meal producers, and other food industries that require a high-capacity automatic filling system. Depending on its configuration, it can be used with liquid, semi-liquid, and viscous products, such as sauces, purees, creams, pastes, tomato products, and food preparations. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1988, operating hours: 6,422 h, 1988 | Caterpillar 613C | Used Scraper | 6422 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 48 inspection points 38 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Immediately ready for use, with excellent starting and engine behavior. The machine runs very well overall; a minor leak was detected in the rotary drive of the shield - typical for devices of this construction year. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41097 Equippo" is commonly used when looking up more details online. Ndsdpfxezzz T Eo Agrsb 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Machine ready for operation, year of manufacture 2017, and has only been used for 3 years in soup and sauce production. The machine cools products already packed in glass or plastic containers. Dimensions: Length – 10,330 mm Overall machine height – 2,078 mm Overall machine width – 4,505 mm Discharge height of containers – 1,100 mm Technical specifications: Maximum production: Plastic cup with a diameter of 95 mm and height of 116 mm, thermal cycle 52 minutes (20 minutes pre-cooling + 32 minutes cooling). Cup temperature: inlet +90°C – outlet +20°C Container/cup dimensions: Diameter 95 mm Height 116 mm Thermal cycle duration: 52 minutes (for 95 mm diameter cup) Empty machine weight: 5,100 kg Total installed power: 26 kW Voltage: 400 V Frequency: 50 Hz Air pressure: 6–8 bar Air flow: 25 Nlt/min Njdpfeyl Szvox Agrjdb Water flow at start-up: 3 m³/h Water flow at full operating speed: 0.2 m³/h Supplied complete with operating instructions in Polish and English.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2188, input voltage: 400 V, product width (max.): 1,500 mm, SWAH LCP-01 A high-performance, automated production line for the manufacturing of rectangular ductwork. The SWAH LCP-01 is a robust European system designed to transform coil material into finished, reinforced rectangular duct sections with maximum efficiency. Njdpfx Agozbh Auersdb Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model: LCP-01 • Year of Manufacture: 2003 • Serial No. (M. No.): 2188 • Application: Fully automated production of rectangular ducts from coils. This line is a complete system, including • 4 Decoilers Station: To hold and feed heavy sheet metal coils (allowing for quick changes between different material thicknesses or widths). • Straightening & Leveling Unit: Ensures the sheet metal is perfectly flat before processing. • Beading/Stiffening Station: Automatically forms longitudinal stiffening ribs (V-profile) to ensure the structural integrity of the rectangular ducts. • Automated Notching & Cutting: High-precision hydraulic system for cutting to the exact programmed length. • Folding/Bending: Processes the material for easy "L" or "U" shape formation or full duct sections. • Material Thickness: Galvanized Steel: 0.4 mm – 1.2 mm Stainless Steel: 0.4 mm – 0.8 mm Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Ndedpoy Szbyjfx Agrsb

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data Njdpoz D S Sbefx Agredb - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.