Used Vitrohm Resistance for sale (1,959)

Condition: new, pressure 1000 kg throat 95.0 mm table length 120 mm Chedpfxexabduj Ahmec table width 120 mm total power requirement manuell kW weight of the machine ca. 17.0 kg dimensions of the machine ca. 270 x 130 x 330 mm Description: - For pressing in and out bearings, bushings, etc. - Made of torsion-resistant steel - Includes mounting holes, ideal for mounting on a workbench - Suitable for bushing removal, straightening, bending, reaming, etc. - Adjustable lever bar, depending on the required force - Ideal for repair shops and general workshop use

Condition: used, Year of construction: 2007, Technical data: Cable extension: 2000 mm Lifting height: 2000 mm Load capacity: 22 - 32 kg Weight: 13.5 kg Description: Chsdor Dg Hzspfx Ahmsc - Secure suspension of device and supply cable - In a “weightless” state - Constant tensile force - Tear-resistant steel cable

Condition: new, maximum load weight: 92,045 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck Codpfx Aszzhfnjhmohc * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: like new (used), functionality: fully functional, Year of construction: 2026, container length: 20 ft, overall weight: 30,400 kg, maximum load weight: 28,000 kg, empty load weight: 2,300 kg, loading space volume: 33 m³, loading space width: 2,350 mm, loading space length: 5,900 mm, loading space height: 2,390 mm, operating hours: 10 h, machine/vehicle number: 0000, An 8-foot shipping container is a compact steel container designed for secure storage and transportation of goods. It is weatherproof, durable, and easy to transport, making it ideal for construction sites, workshops, small businesses, and private storage needs. Typical Specifications Chedpfx Ahjwyvnwsmec External length: 8 ft (about 2.44 m) Width: 8 ft (2.44 m) Height: usually 8 ft 6 in (2.59 m) Material: corrosion-resistant steel Doors: double lockable cargo doors Floor: marine plywood over steel cross members Features: forklift pockets, ventilation, secure locking system Common Uses Tool and equipment storage Construction site storage Mini warehouse solutions Transport of small cargo loads Temporary on-site storage

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you by phone. Seppi M. H3 105 Mulcher / NEW / in stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Total width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulcher head for mounting on a hydraulic arm - Mulches grass and brushwood up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Can be fitted to various adapter plates - Floating mount (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive prepared for hydraulic motor, depending on the hydraulic flow of the carrier machine - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double-taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammer flails (standard) - 9 pieces, Part No. 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - With flow control valve and DRRAIN SAFE™ motor safety valve protecting the motor from incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow rate in l/min (min-max): 35 - 60 Optional: MS03 adapter plate incl. bolts and installation = €530.00 net 3 hydraulic lines required: pressure, return, and leakage oil. The unit is supplied without hoses and fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products in stock for immediate delivery! Mr. Herden (phone number) is happy to assist you. Upon request, we are also pleased to provide you with a financing offer. We are an official sales and service partner for Westtech. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Cedpfxjyix Hme Ahmjhc Errors and prior sale excepted! = Further information = Intended use: Agriculture Please contact Marius Herden for more information.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, type of cooling: water, warranty duration: 60 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. Chodpfx Ajhwaapohmec The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SAPI Jumbo, pressure: 12 bar, total width: 3,087 mm, total height: 2,078 mm, total length: 3,692 mm, overall weight: 3,000 kg, inner dimension width: 2,340 mm, inner dimension length: 3,520 mm, inner dimension height: 2,500 mm, workpiece weight (max.): 500 kg, filter area: 20 m², Equipment: lighting, Efficient and Ready-to-Use JUMBO Blasting Cabin This fully assembled, walk-in JUMBO blasting cabin provides a comprehensive solution for efficient blasting operations. Equipped with two LED blasting lights, it ensures optimal illumination of the workspace. The double-wing door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s lifespan. For air filtration and dust reduction, the cabin features a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor, covered with a grated surface, enables the automatic return transport of the blasting media, while the electric drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance abrasive recycling unit, allowing for efficient processing and reuse of blasting media. The 38-liter pressure blasting pot provides sufficient capacity for extended blasting cycles. The package also includes a 10-meter-long blasting hose and a durable boron carbide nozzle, ensuring optimal blasting performance. Chjdpfx Ajukdfpohmec Ideal for Professional Blasting Operations This blasting cabin is the perfect solution for businesses that require a reliable and efficient system for blasting work. ✔ Custom features, such as loading trolleys, are also available upon request. ✔ Compressed air, electrical supply, and installation must be provided on-site. If you are interested or have any questions, feel free to contact us at any time!

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Manufacturer: Yaskawa/Motoman Year of manufacture: 2013 With 2 robots (load capacity: 1 x 165 kg, 1 x 50 kg) Each with 1 x WIG AC and DC welding system from EWM, 1 x spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel or aluminum Technical specifications Robotic welding system – Specifications / Equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - Control system S7 for fixture Double welding cell with 2 maintenance doors and 2 loading stations - Opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version - Extended design 2 x bases Csdpfxez Aac Uj Ahmehc 1 x control unit with operator panel DX - Master - Slave 1 x floor-mounted chassis with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Centrally programmable in sync via 1 robot control unit Media feedthrough for compressed air and electrical signals in the positioner Design and manufacture of a base frame for part support Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Article no.: 520000050019 For automated and robotic applications Inverter DC welding unit Standard interfaces for automation (Start/Stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: Remote control, optional interfaces for automation, documentation and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Power supply 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Article no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture 4-roller drive Connection for water cooling Control with digital incremental encoder Push-pull capable Separate button for wire retraction, gas test and wire threading Parameter setting and storage centrally via welding system control unit Wire speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Alternating neck technology Push-pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and manufacture of a part support for aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robot, consisting of - Medium frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water chiller Design and engineering Documentation such as machine design and parts lists in a simple form in German CE declaration Welding fume extraction system with piping

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1549 kg dimensions of the machine ca. 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 3000x1500x200, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product Description - Table dimensions: 3000x1500x200 mm - High-quality S355J2 N steel with plasma nitriding - Material thickness: approx. 24.5-27 mm - Hole diameter: 28 mm - Holes arranged in a 100x100 mm grid - Corners, edges, and holes chamfered at 45° - Side panel height: 200 mm - Holes in side panels arranged in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust, scratches, and weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions: 3000 x 1500 x 200 mm - Plasma-nitrided version - Includes 6x base feet (standard configuration) - Includes accessory set (see Figure 3): * 8x 280626.N * 12x 280511 * 6x 280410.N * 2x 280420.N * 2x 280422.N * 4x 280110.N * 2x 280152.N * 1x 283999 Chjdpfx Ahezvq Emsmsc

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment Chsdpfx Aexaablohmsc

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm Chjdpexaab Eofx Ahmec - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg SIEGMUND authorized dealer - all items available! Product description Chodpoxabc Dsfx Ahmjc - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: like new (used), Year of construction: 2019, functionality: fully functional, The discharge conveyor from Trio Technik is available for sale and has the following details: Length: 700 mm Clear width: 410 mm Conveyor belt in blue, temperature-resistant up to 80°C, without cleats Chjdpowtfiksfx Ahmec Belt speed (constant): 9 m/min Without support legs Guide plate: 60 mm high

Year of construction: 2021, operating hours: 808 h, condition: ready for operation (used), functionality: fully functional, For sale is a vibration tunnel manufactured according to a custom design, intended for continuous transport and irradiation of bulk materials and other products suitable for vibration transport. The device was made to order, and its design was created with a specific technological process in mind. The entire unit is made of acid-resistant steel. The tunnel is equipped with 20 Philips TUV lamps, each with a power of 75 W, placed above the transport surface. During operation, the product is continuously transported through the tunnel and simultaneously exposed to UV-C radiation. Cedpfx Ahjz A Tgwomjhc 1. UV-C Application The UV-C system can be used for surface irradiation of products to reduce the number of microorganisms. Originally, the device was designed for use, among other things, for: • seed material, • grains, • herbs, • vegetables, • other suitable bulk products. The effectiveness of the UV-C process depends on factors such as the type of product, its properties, the thickness of the layer, and the exposure time. The possibility and effectiveness of using the device should be verified each time for a specific product and technological process. 2. Adaptability to Other Applications A significant advantage of the device is its individually designed, modular construction, which allows for further adaptation to the user's needs. After removing or modifying the UV-C system, the structure can be used as: • a vibration conveyor for bulk materials, • a vibration feeder, • a dispenser, • a device for evenly distributing the product, • an element of a process line that feeds the product to the next stage of the process, • a vibration screener – after using appropriate screens, • a device for transporting seeds, grains, spices, herbs, granules, and other materials such as pellets, frozen, and fresh vegetables and fruits suitable for vibration transport. The construction can serve as a basis for further individual adaptation according to the requirements of a specific production process. 3. Construction The device is entirely made of acid-resistant steel, using two Italvibra vibration motors and Rosta suspensions. Philips TUV lamps, each with a power of 75 W, are located above the transport surface. Shatterproof lamp covers have been used to increase safety in a production environment. The construction provides access to the working elements and allows for further modifications to the device depending on the planned application. 4. Device Condition Upon request, we can provide additional photos, videos, technical information, and discuss the possibilities of adapting the device to a specific application. 5. Technical Specifications Parameter Data Type of device UV-C vibration tunnel Design Custom design / made to order Construction Acid-resistant steel Tunnel length 420 CM UV-C lamps 20 × Philips TUV Lamp power 75 W Total UV-C lamp power 1500 W Product transport Vibration conveyor Vibration motors 2 × Italvibra Power adjustment Yes – adjustment of vibration force Suspension Rosta Operating mode Continuous operation Discharge Directly into a bag Overall dimensions 420 X 115 X120 Weight 400 KG Power supply 380V

Condition: excellent (used), mileage: 378,848 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 10x8, wheelbase: 7,160 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,100 mm, total width: 2,520 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, navigation system, power assisted steering, power mirror, traction control, - 4x4 - Aluminum fuel tank - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Refrigerator - Air horn - Rotating beacon - Rear view camera - Sun visor - Tool box - Power take-off (PTO) - Central lubrication system Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Rear axle 3: Max. axle load: 11,500 kg Rear axle 4: Max. axle load: 11,500 kg Weights Unladen weight: 19,580 kg Payload: 30,420 kg Gross vehicle weight (GVW): 50,000 kg Functional Body brand: RHINO AO KIPPER MET KLEPPEN 24.5 M3 Dumper: Rear Maintenance, history and condition APK (Technical Inspection): New TÜV upon delivery Technical condition: very good Optical condition: very good Identification License plate: 39-BNL-5 MAN TGS 50.500 10x8 BLH WS + RHINO 24.5 M³ HARDOX REAR DUMPER First registration: 08.04.2019 License plate: 39-BNL-6 Mileage: 378,848 km Drive: 10x8 Power: 500 hp Transmission: Automatic Cab: Day cab HU / APK valid until: 06-2027 Available: 2 identical vehicles For sale is an exceptionally robust and well-maintained MAN TGS 50.500 10x8 BLH WS 5-axle vehicle, equipped with a rugged RHINO 24.5 m³ rear dumper made of HARDOX steel. This vehicle was specifically designed for the most demanding tasks in the construction, earthmoving and transport sectors. Thanks to the powerful 500 hp engine, the 10x8 drive, the large wheels, and the hydraulically suspended and steered rear axles, this MAN offers excellent traction and maneuverability – even under difficult operating conditions. CHASSIS & DRIVE * MAN TGS 50.500 * 5-axle * 10x8 drive * 500 hp * Automatic transmission * Large wheels / heavy-duty off-road design * Rear axles hydraulically suspended * Rear axle hydraulically steered * Very good traction in off-road conditions * High maneuverability despite 5-axle chassis * Central lubrication system * DIN mounting plate at the front of the vehicle * Rotating beacons RHINO 24.5 M³ HARDOX REAR DUMPER The vehicle is equipped with a very robust RHINO rear dumper. * Volume approx. 24.5 m³ * Rear dumper * Tipping body made of wear-resistant HARDOX steel * Very robust and durable construction * Aluminum covers * Designed for heavy and intensive use * Ideal for earth, sand, rubble, stones and other heavy bulk materials The combination of the heavy 10x8 chassis and the robust HARDOX tipping body makes this vehicle an excellent machine for demanding construction and earthmoving work. CAB & EQUIPMENT * MAN day cab * Air conditioning * Automatic transmission * Comfortable driver's workstation * Rotating beacons * Central lubrication system * DIN mounting plate at the front Csdpfszzn Ezox Ahmohc CONDITION The vehicle is in exceptionally good, clean and original condition.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 8,000 mm, total width: 5,000 mm, total height: 3,130 mm, inner dimension length: 7,800 mm, inner dimension width: 2,500 mm, inner dimension height: 2,700 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, temperature: 65 °C, Equipment: documentation/manual, overall dimensions of the device: 8000 [mm]: * device length - 5000 [mm]: device width 3130 [mm]; (from item 0 device height - - working clearance of the device: 2530 [mm]: height of the technological opening - . * width of the technological opening - 400 [mm]. - electrical power: 400/230V:N+PE: 50 Hz 36.0 [kW]; * supply voltage, installed power - - - water supply parameters - 2.0 [bar] (0.2 MPa) - running water, d=32 [mm] - gas parameters for burner supply * natural gas GZ 50 • 3/4" connection • minimum gas pressure at the burner -13.8 mbar • minimum gas flow washing machine working chamber - 7800x1500x2700 mm - working chamber dimensions - washing machine working chamber made of - black steel structure, PP plate - chemical-resistant roof fan 2.2 Washing bath tank. material: • supporting structure - black steel structure, - grade 316. * inner lining - 50 mm thick * insulation - mineral wool - PP plate outer lining - 4000 number of baths - natural gas heating medium - 120 kW - automatically adjustable heater power bath temperature - 40 to 65 °C temperature range - PT100 sensor - rod-type bag filter sensor temperature sensor - bath level sensor - filtration of the bath from particles using an external bath circuit (the filter has its own circulating pump) 2.3 Rinsing tank 1. - PP - 3000 L material, number of baths, level sensors - Cjdpfx Ahez Dtgaomjhc - 2.4 DEMI rinsing tank. - PP material - 3000 L number of baths - level sensors - 2.5 Bath circuit circulating pumps washing - max 222 m³/h - 18.5 kW rinsing - max 198 m³/h - 11 kW DEMI rinsing - max 198 m³/h - 11 kW suction pump - max 222 m³/h - 18.5 kW circulating pump DEMI - 4 m³/h - 0.37 kW diaphragm pump 75 /

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, clamping force: 700 kN, Equipment: documentation/manual, Seologica controll Clamping force: 70 t Screw diameter: 40 mm (highly resistant) Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Air valve: 1 Hours: 23000 2 servo pumps Chedpfjygtquox Ahmsc 4 free cooling circuits 6 electric heating zones for mould

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A56 GW26GA01430, Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers for 100 km/h with confirmation - all players from BSG Chemie Leipzig have signed here; subsequently coated with UV-resistant clear lacquer * Optimum road holding due to stable chassis with safety V-drawbar * Robust rubber spring axle with independent wheel suspension * Maintenance-free compact wheel bearings Csdpfoyqdtujx Ahmohc * Solid side walls with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for securing loads (model-dependent) * Sturdy cast steel toggle-clamp fasteners (model-dependent) * Non-slip, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid Low loader by STEMA, type FT 8.5-20-10.1 with lid, gross weight: 850 kg, overrun braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: reconditioned (used), Year of construction: 2020, operating hours: 321 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Scrubmaster B45 CL TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) Year of manufacture: 2020; 321 operating hours 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface Chodpfxez D Etfe Ahmec New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Built-in battery charger and wheel drive facilitate daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and suction hose New suction motor ensures high water extraction power from the squeegee Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah Gel Batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: new, power: 330.97 kW (449.99 HP), fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: red, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, number of seats: 6, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, differential lock, parking heater, power assisted steering, trailer coupling, truck registration, From our range of new vehicles, we offer you: Tank Firefighting Vehicle TLF 4000-Crew 4x4 All-Wheel Drive on off-road capable SCANIA P450 XT chassis Demanding operations require high-quality and efficient equipment. Our TLF 4000-Crew on Scania ensures fire crews, technology, and large quantities of extinguishing agents arrive quickly and safely at their destination. Chassis: • SCANIA P450 XT 4x4 EURO 6 with 450 HP (331 kW) • Automated gear transmission • Off-road tires, dual tires on rear axle for high driving stability • Front winch available upon request Cab: • Standard SCANIA CREW CAB crew cab (1:5) in RAL 3000 (fire red) • Standard 4 SCBA holders in crew compartment • Air conditioning and auxiliary heater Superstructure: • High-quality frame construction made of rust- and corrosion-free materials • Fold-out steps for each side equipment compartment • Stainless-steel, individually customized equipment storage • Walkable, slip-resistant vehicle roof • Ladder mount, available with withdrawal aid upon request • Quick access to pump via a combination of roller shutter and rear flap, which also provides weather protection Vehicle pump/extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP/FPN 4000-10 as per EN 1028 • Pump & Roll capable • Output 4,000 l/min at 10 bar and 400 l/min at 40 bar • Clearly arranged, intuitive pump controls • Additional information display for the operator • Fault-resistant external venting system • Integrated, infinitely adjustable foam mixing system • 5,000 l water tank with integrated 500 l foam agent tank • Additional heater in pump compartment Firefighting equipment: • High-pressure rapid intervention with 60 m form-stable hose • Roof-mounted foam/water monitor 2,400 l/min, also available as remote controlled • Additional front monitor available • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on vehicle roof • LED front flashers • Pneumatic special signal system • 100 W loudspeaker system with PA functionality • Rear view camera • Comprehensive LED lighting in crew and all equipment spaces • LED scene lighting on superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board available upon request We are happy to provide you with a detailed quotation and present the vehicle in detail. Chedpfx Asyh N Nyehmsc Note: All information has been provided to the best of our knowledge and belief, but without guarantee for completeness or accuracy. Images may show optional equipment. This is for information purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: new, fuel type: diesel, fuel: diesel, Equipment: air conditioning, airbag, central locking, differential lock, parking heater, trailer coupling, From our product range, we offer you: Equipment vehicle logistics GW-L2, all-wheel drive, on a rugged MAN TGM 13.290 chassis. A vehicle for many tasks. Equally suitable for severe weather operations as it is for establishing a water supply over long distances, even in difficult terrain during forest and vegetation fires. As a modular replacement for rescue and equipment vehicles or with water tanks for transporting firefighting water. Or... ...just right for your needs! Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 hp (213 kW) with automatic transmission • Same-track single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire engine red) • Cab with auxiliary heater Superstructure: • High-quality superstructure made of rust and corrosion-resistant material • Two spacious side equipment compartments • Fold-out steps for each side equipment compartment • Individually customized equipment storage systems made of stainless steel to your specifications Tail lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Platform dimensions 1810 mm x 2520 mm (height/length x width) • 2-button foot control • 2-fold roll-off safety • LED platform lights Safety and Lighting Chedpfxszmy Aps Ahmsc • LED mini light bar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rearview camera • Comprehensive LED lighting in the crew cabin and all equipment compartments • LED ambient lighting on the superstructure and auxiliary headlights • Pneumatic LED light mast with remote control We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer but is for informational purposes only. Subject to prior sale!

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, input voltage: 380 V, total length: 3,000 mm, total width: 1,500 mm, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, safety light barrier, WatMachinery OT3015F is a modern fiber laser cutting machine with a 1500 × 3000 mm working area, equipped with high-quality industrial components and an automatic Raytools BS03K cutting head. The machine is designed for precise and efficient cutting of carbon steel, stainless steel, aluminum, and brass. (Photo only for REF.) Available laser source powers: 1500 W / 2000 W / 3000 W (Raycus). Key Advantages - Heavy-duty construction – high rigidity, stability, and vibration resistance - 4th generation aerospace-grade aluminum gantry – low weight, rapid acceleration, and high motion accuracy - Raytools BS03K cutting head – automatic focusing, optics protection, high cutting speed - Raycus laser source – reliability, long service life, and high energy efficiency - Raytools XC3000S control system – intuitive operation, file editing, remote control capability - INOVANCE servo drives – high precision, fast dynamic response, stable operation Rebi N Auewiwtyofcen - Precision drive system – LEITESEN racks (dual drive) + PEK Italia linear guides - SMC pneumatic system (Japan) – reliability and longevity - Schneider (France) electrical components – high safety standards - S&A industrial chiller – dual-circuit cooling, alarms and machine protection Csdpowiwtyefx Ahmshc - Fume extraction system – efficient smoke removal and improved working conditions - Complete industrial configuration – machine ready for operation immediately after installation Technical Specifications Model: OT3015F Working area: 3000 × 1500 mm Laser source: Raycus Fiber (1500–3000 W) Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X Axis - Max speed: 80 m/min - Travel: 3000 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Y Axis - Max speed: 80 m/min - Travel: 1500 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Z Axis - Travel: 100 mm Additional Parameters - Maximum acceleration: 0.8 G - Power supply: 380 V / 50 Hz - Operating mode: 24/7 continuous operation - Machine weight: approx. 1500 kg - Dimensions: 4500 × 2300 × 1500 mm Applications: ✅ Kitchen equipment industry ✅ Bathroom equipment industry ✅ Automotive ✅ Advertising and metalworking Why choose us? JET STAR INTERNATIONAL offers comprehensive solutions for laser cutting machinery, providing service, training, and spare parts availability throughout Europe. Our machines combine quality with affordability, delivering an excellent cost-to-performance ratio. 🗂️ Available to order 📞 Contact us for individual offers and delivery terms! 🌍 Support available in Polish, English, and German.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space width: 1,832 mm, loading space height: 1,861 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Exhaust system, EU6e (EC) * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l/130 kW (4V) BIT * Start-stop system with brake energy recuperation * Front towing eye * Preparation for trailer hitch * Standard wheelbase 3,640 mm * Fuel tank 75 l * Rear axle differential lock (manually selectable, mechanical) * Approved as 3.5t * Reinforced front axle * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, rolling resistance optimized * All-season tires Cjdpez Am Nnefx Ahmohc * Immobilizer, electronic * Electrical connection block and auxiliary heating pre-installation * 'Climatronic' air conditioning in the cab * Daytime running lights with auxiliary driving lights and coming/leaving home function * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering light * Side marker lights * Headlight cleaning system * Windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle area * High roof, painted in vehicle color * Grab handles on the rear pillars * Radiator grille, black with chrome trim * Rear hinged doors with enlarged opening angle * Windshield wiper intermittent function with light and rain sensor * Sliding door, right * Laminated front windshield with heat-reflecting glazing, heated * Airbag for driver and front passenger with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise damping measures * Glove box with lockable lid, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12V socket, cup holder * Three-point automatic safety belts with height adjustment * 12V socket in the cab (in the instrument panel) * Belt warning, E-contact in the belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in fabric 'Toronto Grid' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging performance * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business (12.9 inch) * Digital radio reception (DAB+) * MAN Media Van Navigation Business Package (12.9 inch) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Park assist front and rear * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guidance lines * High beam assist 'Light Assist' * Attention and fatigue warning system * Lane change assistant * Side wind assistant * Blind spot detection on both sides and exit warning * Turning assistant * Emergency assistant (Active lane keeping assistant, Emergency Assist, and Traffic Jam Assist) * Intelligent speed assistant * With multifunction camera * Cruise Assist Plus * Grab handle on the parti

Condition: new, mileage: 5 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor Chedpfx Ahoy Tml Tsmjc - Tool box - Transportation - Twin wheels - Xenon headlights = Additional options and accessories = - Airbags - Air horn - Air Suspension Seats - Aluminium fuel tank - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - Radio/cassette player - Side door - Side skirts - Sleeper cab = Remarks = Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is a powerful, robust, and versatile tipper truck, specifically designed for heavy-duty transport in construction and mining applications. With its strong engine, high payload capacity, and reliable Meiller tipper body, this vehicle is perfectly suited for moving large volumes of soil, sand, stones, or other bulk materials. Specifications Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper: - Drive: 8x4 configuration for optimal stability and traction. - Maximum GVW: 41 tons, suitable for extremely heavy loads. - Axle Configuration: Dual driven rear axles. - Suspension: Reinforced suspension for intensive use. - Wheelbase: Optimized for maneuverability and stability in heavy-duty applications. - Engine: 12.8-liter inline 6 Euro 3 diesel engine, 394 hp (294 kW), 1900 Nm torque. - Transmission: PowerShift3 automatic with off-road mode for maximum control. - Axle Loads: 2x front axle 7.5T, 2x rear axle 13.4T. - Clutch: Double Disc Clutch. - Tires: 315/80 R 22.5. Meiller Tipper Body: - Classic rear tipper H436, 20 cbm, HARDOX floor. - Type: Rearward tipping body, ideal for bulk transport. - Capacity: 20 m³ loading capacity. - Material: Wear-resistant steel body for enhanced durability. - Hydraulics: Meiller high-performance hydraulic system for efficient unloading. - Safety: Automatic locking system and stabilizer bar for safe operation, even on uneven surfaces. Advantages: - Effortlessly transport large volumes of material with a GVW of 41T. - The engine is engineered for efficiency, even under heavy loads. - Rugged design and high ground clearance for off-road terrain. - Simple and intuitive tipper control from within the cab. Applications: The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is perfectly suited for: - Construction Projects: Transporting soil, sand, gravel, or debris. - Mining Operations: Moving heavy stones and ores. - Infrastructure Works: Supplying materials such as asphalt and building supplies. DIMENSIONS: L. 8282MM | W. 2500MM | H. 3700MM (WEIGHT 16,000KG) Meiller Heritage: Meiller tippers have been manufactured in Germany for over 170 years and are renowned for their reliability and innovation within the construction sector. Proven in Tough Conditions: The Arocs 4140K has been tested in the most demanding construction and mining environments — from deserts to quarries — and consistently delivers outstanding performance. = More information = General information Cab: day Transmission Transmission: Mercedes Powershift 3, 12 gears, Automatic Axle configuration Tyre size: 315/80R22.5 Front axle 1: Steering Front axle 2: Steering Functional Make of bodywork:...

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG Chodsz Iq T Eopfx Ahmec • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!