Used Walking Floor Semitrailer for sale (11,990)

Condition: used, maximum load weight: 28,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 09/2025, Equipment: ABS, CARNEHL CSS/AL Moving Floor Trailer * JOST axles * 1 liftable axle * Air suspension * Pneumatic control * Disc brakes * Sliding tarpaulin * Double-wing doors with rotary bar lock at the rear * Access ladder and platform at the front wall * ABS connection * 15-pin electrical connector * ISO air connectors with red and yellow coupling heads * 21 boards * Folding tail light guards * Load pressure gauge Interim sale and errors excepted! Djdpsx Tyadofx Agmsck Sale exclusively according to our terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information intended for initiating a contract. The details provided here are non-binding and do not constitute guaranteed properties.

Condition: used, maximum load weight: 28,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2026, Year of construction: 2026, Equipment: ABS, Legras SBS 2220 Moving Floor Trailer 90 m³ * SAF axles * 90 m³ loading volume * Disc brakes * Lift axle on the first axle * Air suspension * Pneumatic control * Load pressure gauge * Rolling tarpaulin * Side safety tarpaulin * Folding fender for lighting system * LED lights * ADR-approved wiring * Maintenance hatch front left * ABS connector * 2 x 7-pin power sockets * ISO air couplings with red and yellow coupling heads * Toolbox * Access ladder and platform on front wall * Double-wing rear door * Maintenance hatch front left Dcodpfx Asyfzicjgmek Interim sale and errors excepted! Sale only under our General Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transmission errors within the systems of different platform providers. Therefore, we expressly point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer according to §145 of the German Civil Code (BGB), but rather serves as information for contract initiation. All information provided is without guarantee and does not constitute warranted characteristics.

Condition: used, axle configuration: 3 axles, first registration: 04/2012, Year of construction: 2012, Equipment: ABS,

Condition: used, axle configuration: 3 axles, first registration: 11/2011, Equipment: ABS,

Condition: used, axle configuration: 3 axles, first registration: 11/2020, Equipment: ABS,

Condition: used, axle configuration: 3 axles, first registration: 06/2012, Equipment: ABS, Lift axle Dcedpfsrdtihox Agmok

Condition: new, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 91 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 Dodpfxjy Dmu Nj Agmeck * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: used, overall weight: 36,000 kg, first registration: 09/2011, - Aluminium - 93 m³ capacity - Hydraulic Dodewwzr Njpfx Agmeck

Condition: used, empty load weight: 8,050 kg, maximum load weight: 30,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schwarzmüller moving floor S1 J series | Hydraulic connections front wall | SAF axles with disc brakes | Tool box, spare wheel holder | 8050 kg tare weight | Aluminum rims | Radio remote control | Tires: 385/65 R22.5 | 92m³ | Subject to errors and prior sale. Dsdjvialtopfx Agmsck

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902036248, empty load weight: 7,272 kg, maximum load weight: 27,728 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Container color: solid color, RAL color freely selectable Chassis: semi-trailer, for forwarding companies Fine-grained steel welded construction in lightweight design, up to the support legs, trailer plate with replaceable 2" kingpin 24 tons, 2-speed support winch, single-sided operation Extension ladder at the rear Dcsdpfx Ajza S E Rjgmek Door latch on the side Folding mudguard for lighting unit Rear impact protection 1 aluminum ladder approx. 3,550 mm, with holder on the side 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, activated by "3x braking" Braking system 2-line compressed air braking system Spring brake parking brake 2 tamper-proof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS 1 additional air connection on the left rear, with quick-release coupling Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal ("flashing side marker lights") 2 white position lights at the front in LED 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Self-tipping hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics. Switching between forward/reverse operation is done electrically via remote control with cable Operation hydraulically via truck PTO Hydraulic connection with hose on the front wall and HDK screw connection NW = 48 mm Self-tipping floor Sliding floor with wear plate at the rear Floorboards made of aluminum, 8 mm floor profile, ribbed design Self-tipping container Aluminum box container made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded all around at the top with a wide special reinforcing profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a 1/2 to 1/2 split, framed all around with a special U-profile with stop and rubber seal, with 2 swivel latch bars on the outside, locked at the top and bottom. Rear wall with mechanical safety locking, operated at the rear on the left in the direction of travel Standing platform with ladder on both sides in the direction of travel left/right and railing, for opening and closing the roof tarpaulin 3 removable, swiveling crossbars for tarpaulin support + tarpaulin support at the front on the front wall and at the rear on the rear wall Paint finish Frame DB 7350 Novagrau "10-year warranty against rust through" Support legs Black coated Container Aluminum natural - can be painted in RAL color according to customer's request Roof tarpaulin Not yet

Condition: used, maximum load weight: 32,750 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,739 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle TMT Walking Floor Semi-trailer, 92 cbm First registration 05/2025 Mileage only 75,854 km Internal dimensions (L x W x H) 13,600 x 2,470 x 2,650 / 2,825 mm Axle track 1,310 mm Unladen weight 7,870 kg Saddle height 1,150 to 1,180 mm Chassis made of S700 MC steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with anti-roll protection RSS 1st axle: Lift axle 3rd axle: Steerable axle Air tank: Aluminum Tire size: 6x 385/65 R 22.5 Jost full-load swivel saddle Lighting: ASPÖCK full-LED 2 x LED work lights Toolbox 800x500x500 mm CARGOFLOOR sliding floor with 21 planks, material thickness 8.0 mm, corrugated Full lining with sliding bearings Control system with wireless remote control Rear end plate made of stainless steel 2 crossbars, reinforced version. Only 2 crossbars allow for better and easier loading! Reinforced tarpaulin roof Rear crossbar can be tilted Dsdpfx Agozayidsmock LaSi code according to EN 12642 XL "Rollfix" protective cover for the left side wall, extending over the entire length with a retractable mechanism RENTING is the new BUYING; with us, it is also immediately available in a full-service rental agreement.

Condition: new, maximum load weight: 31,098 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock no.: 5743 IMMEDIATELY AVAILABLE! AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Approx. 92 m³ Kraker sliding floor semi-trailer with 10 mm ribbed floor / remote control / pneumatic underrun protection / side protection tarpaulin / Chassis galvanized ---- * Manufacturer: Kraker * Type: K-Force * Year of manufacture: 2026 * Total weight: 39,000 kg * Unladen weight according to manufacturer: 7,902 kg * Payload: 31,098 kg * Axles: 3x SAF with 1st axle as a lift axle and starting aid / disc brakes * Suspension: Air suspension with lifting and lowering * Tires: 385/65R 22.5 on steel rims * Color: Body RAL 7005 / Chassis MicroZinq / Tarpaulin SIO 7500 Black * Volume: 92 m³ (13.53 m long x 2.48 m wide x 2.69 m / 2.782 m high) * EBS Wabco * Chassis Microzinc * Wear plates at the rear 1,250 x 2,500 x 3 mm * Two-wing rear doors with pneumatic locking * Operating platform at the front with access ladder on the left * Saddle height: 1150 mm * Cargo Floor CF 500 Compact with 21 floor planks * Floor 10 mm thick, ribbed with aluminum end caps * Operation: Remote control and in the control panel * at the rear left * Roll tarpaulin with central locking * Roll-fix dirt tarpaulin for the side wall with crank Dedpfx Agjy T Dk Tomjck * Sliding side wall made of aluminum with a trailing tarpaulin * 2 plastic rail cleaners on the carriage * Extendable access ladder at the rear right * 4 x Swiveling steel struts 50mm round * LED rear lights 2 x round on each side * 2x LED work lights at the height of the support winches * 2x LED reversing lights located behind the axles * Tool box made of plastic at the rear left * Holder for broom and shovel * Ladder with 10 steps * Hydraulic hoses at the front approx. 3.5 m long * Individual fenders * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard * Pneumatically folding underrun protection * Full load supports (crank supports) AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Note on possible errors in the advertisement: IMMEDIATELY AVAILABLE! AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Despite careful preparation of the advertisement, individual errors may have crept into the text or data. We assume no liability for errors, changes or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, empty load weight: 8,200 kg, maximum load weight: 26,800 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 04/2023, loading space length: 13,460 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, loading space volume: 82 m³, total length: 13,460 mm, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: grey, Year of construction: 2023, operating hours: 87,097 h, mileage: 87,097 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 40978 Reisch, sliding floor trailer * Year of manufacture: 2023 * ABS, Anti-lock Braking System * Alloy wheels * Air suspension * Lift axle * Tarpaulin, neutral color * Used tarpaulin * Portal door * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Connection plug, 15-pin Dcedpjyv Upxefx Agmok * Lifting and lowering device * Storage box / toolbox * Platform * Roller shutter tarpaulin * Suspension: Air * Total weight: 35,000 kg * Tare weight: 8,200 kg * Payload: 26,800 kg * Permissible total weight: 35,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 60% - 60% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 60% - 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% - 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Interior dimensions: L=13460 mm, W=2450 mm, H=2500 mm * Internal volume*: 82 m² * Pallet spaces: 33 * Wabco SmartBoard * Mileage: 87,097 km * Remote control * Tire pressure monitoring * Cargo-Floor CF 500mm * 7mm thick XD Extra Duty * Saddle height 1150mm * Full-LED lighting * Color 7012 Basalt Grey * Upon request, we will send you a video * Construction details and further images Disclaimer: Subject to changes, prior sale, and errors. You can find more images and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, maximum load weight: 28,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2020, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,750 mm, loading space volume: 91 m³, Equipment: ABS, Stock no. 5833 Approx. 91 m³ Carnehl Moving Floor Semi-Trailer with Remote Control ---- * Manufacturer: Carnehl * Type: CS/AL - Moving Floor * First registration: 02/2020 * Gross vehicle weight: 36,000 kg * Unladen weight (according to registration): 7,830 kg * Payload: 28,170 kg * Axles: 3 x SAF with 1st axle as lift axle / disc brakes * Suspension: Air suspension with lift and lower function * Tyres: 385/65 R 22.5 approx. 50% on steel rims * Colour: White / Blue * EBS Wabco * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.75 m high) * Remote control * Swing doors with pneumatic locking * Side protection tarpaulin * Roll tarpaulin with tension belts * Front operating platform with left and right access Dcjdpfx Aey Sq Ucegmek * 5 folding tarpaulin stops * Service door front left * 3 crossmembers * Toolbox rear right * 2 LED work lights * LED reversing lights * LED tail lights with aluminium protection plates * Shovel and broom holder left * Additional hydraulic connections in front of the supports * Full load supports * Single mudguards * Wabco Air Suspension Control box * Moving bulkhead with floor sheet * Folding "A" sign at the rear * 1st owner German trailer!! German documents!! 1st hand!! Note regarding possible errors in the advertisement: Despite careful preparation of this advertisement, errors may occur in the text or the specifications given. We assume no liability for mistakes, alterations, or prior sale. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, empty load weight: 8,020 kg, maximum load weight: 30,980 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2018, total length: 14,040 mm, suspension: air, tire size: 385/65R22,5, color: black, Year of construction: 2018, gearing type: mechanical, Equipment: had accident, LEGRAS FMA sliding floor semi-trailer with unrepaired damage on the front left and rear right side (see photos). For further information on the vehicle offered, please request a detailed quote. Inquire about our favorable lease-purchase, leasing, or full-service rental offers. Our general terms and conditions apply. Subject to prior sale. Financial service offers are subject to a positive credit check and are only valid for GERMAN commercial enterprises. Further information is available at [website address], aluminum floor, SAF axles, tool box, lift axle, wing doors, export vehicle, first owner. Dedpfexyzzmox Agmeck

Condition: used, empty load weight: 8,560 kg, maximum load weight: 27,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, total length: 13,575 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,210 mm, color: black, gearing type: mechanical, Equipment: ABS, Sliding floor trailer with side doors. Lease-purchase option without a down payment, monthly lease-purchase rate of €1,199. Term: 84 months. After the term expires, purchase at residual value, return, or exchange for a new vehicle. Full-service rental with the option of later purchase is possible. Sliding floor semi-trailer. Hydraulic connections on the front wall. Work platform with access. Extendable access ladder at the rear. Moving wall for complete emptying. Front wall made of aluminum profiles and a solid upper frame profile. Side walls made of aluminum hollow profiles 35*268. Aluminum double-wing door. Sliding floor system LEGRAS. Floor type 10 PVC. Roller cover tarpaulin with 3 removable crossbars. 4 tie-down straps with winches on the outer frame for securing the tarpaulin. Longitudinal straps under the tarpaulin. E-bike holder. Body design for E-bikes. Brake disc 430mm. E-bike charging sockets 2*7 + 1*15 pole. Folding rear light cover. Rubber rear mudflap on the U-profile. Aluminum rims, and more. Ask about our affordable lease-purchase or leasing offers. Our general terms and conditions apply. Subject to prior sale. Prices quoted are plus applicable VAT of 19%. Financial services offers are subject to a positive credit check and are only valid for GERMAN commercial enterprises. Further information is available at [website address]. Available for rent, container doors, disc brakes, aluminum floor, SAF axles, toolbox, side door, lift axle, double doors, partition, order vehicle, rental possible, alloy wheels, new MOT/emission test, other equipment available. Dcedpfowmr Exex Agmok

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. Dedpfx Agsxplxzemeck 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: used, maximum load weight: 28,230 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,440 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 89 m³, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 3-Axle Knapen KT 01 Moving Floor Trailer 89m³ VIN: 7028454 Chassis / Attachments: * Air suspension / lifting + lowering function * Lift axle: 1st axle * Haacon landing legs * WABCO Smart Board * Pressure gauge * 3 x BPW axles with disc brakes * Tyres: 385/65 R.22.5 * Remaining tyre tread: 1=60/70% 2=30/60% 3=50% * PVC tool box by Knapen Body: * Moving floor system: Cargo Floor * L x W x H: 13.44 m x 2.48 m x 2.68 m * Capacity: approx. 89 m³ * Sliding tarpaulin (roll tarp) * Standing platform with walkway and ladder on the left side Weights: * Gross weight: 36,000 kg * Payload: 28,230 kg * Unladen weight: 7,770 kg Dcjdeyk N N Ispfx Agmjk Miscellaneous: * German registration New technical inspections / safety checks or load capacity increases/reductions are available upon request. We are happy to assist with the procurement of export/transit license plates, and can also organize the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to prior sale, changes, and errors! ---- About us Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² premises, you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. Customer satisfaction is very important to us, which is why we offer our customers an excellent all-round service package and provide them with a competent point of contact to assist them in buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to assist in organizing special transports. Temporary/export license plates We are happy to assist in obtaining export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle STAS Walking Floor semi-trailer, 91.5 cubic meters NEW vehicle, never used Dcedpsyih R Sjfx Agmek First registration 11/2025 Internal dimensions (L x W x H): 13,500 x 2,475 x 2,650 / 2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Saddle height: 1,150 to 1,180 mm Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard with axle load display 1st axle: lift axle >> 3rd axle: STEERABLE AXLE Air tank made of aluminum Tire size: 6x 385/65 R 22.5 Crank-operated saddle JOST full-load Lighting: ASPÖCK full-LED 4x LED work lights Toolbox at the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails: 3 pieces, reinforced for waste transport Roof tarpaulin, reinforced Panama version, 900 g 12 pairs of lashing eyes in the floor Cleaning door in the front wall Rear crossbar can be folded, unlocked from below! Ideal for bale transport RENTING is the new BUYING, and with us, it is also immediately available with FULL-SERVICE rental.

Condition: used, maximum load weight: 30,920 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, BENALU Jumboliner Moving Floor Trailer 90.1 m³ * 90.1 cubic meters * SAF axles * 1st and 3rd axle liftable * Alloy rims * Air suspension * Pneumatic controls * Disc brakes * Sliding tarpaulin * Side protection tarpaulin * Smartboard * Double-wing rear door with swivel rod locking * Access ladder and platform at the front wall Dsdpoy R Ipzjfx Agmock * ABS connection * 2 x 7-pin power connectors * ISO air connections with red and yellow coupling heads * 21 boards * Service hatch on the front wall * Load pressure gauge * 1 x hydraulic connection on the front wall * 1 x hydraulic connection below between the landing gears Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. Some inaccuracies may result from data transmission issues between various platform providers. Therefore, all information is supplied without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information intended to initiate contract negotiations. The information provided here is non-binding and does not constitute guaranteed properties.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: silver, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Dcodpfx Agoy Snmpemjk Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Recommended pump performance: Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Djdpfx Aefakkcjgmsck Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels Dedpfx Agoyh S Aiemjck 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Dcedpfofi Nmwsx Agmek Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Dcsdofi Nmpopfx Agmok Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.