Used Weber-Hydraulic Weber-Hyd Hydraulic Tool Kit for sale (51,147)

Condition: excellent (used), Year of construction: 2001, sheet width 2050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 12 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control konv. total power requirement 7.5 kW weight of the machine ca. 3800 kg. range L-W-H 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition (!!) Features - Robust, slide-guided electro-hydraulic panel shear - HACO control panelâ??front left * Easy operation directly at the cutting table * Adjustment of cutting angle and backgauge * Emergency stop button, latching - Electromotor-driven material stop/backgauge Ibedpfoz St Rpex An Ioc * Fine adjustment with handwheel (front left) - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front * Eccentric adjustment - 1x long side stop - Front finger guard - 1x freely movable foot switch - Rear sheet metal chute - Operating instructions

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal Ijdpsz Snrnofx An Isbc The machine is sold with the table shown in the pictures.

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm Iodpfx Aeupbdgjn Isbc -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 - Hold-down units: 3 Ibsdpozryy Ssfx An Ioc - Pressing area: 260 x 145 cm

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Iedpfxswi Snxj An Ijbc Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Condition: good (used), Year of construction: 2001, Cutting length 3060 mm Maximum cutting capacity 6 mm Manual adjustment of cutting gap 750 mm backstop Ibodpjz Sx Exofx An Iec Fold-up finger guard Support arms with scale with sheet metal holding device

Condition: ready for operation (used), Available for immediate pickup from our location: Hydraulic long bending machine Manufacturer: Thalmann Capacity: 6000 mm bending length Material thickness: 2 mm Roller shear Back gauge Iodpfsz Ixm Tjx An Iebc Drive power: 4 kW Bending angle adjustment Weight: 3 tons Price: EUR 6,000.00 plus VAT, ex works.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. Ibodpfxez Ib R Ie An Isc A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: good (used), operating hours: 1,995 h, sheet thickness (max.): 6,040 mm, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Isdpfxoz Rn Ads An Ijbc Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Year of construction: 1986, condition: good (used), functionality: fully functional, machine/vehicle number: 540, SANDT 540 – 50 Ton Hydraulic Double-Column Press – 1350 × 600 mm Good quality German-built SANDT 50-ton hydraulic press, now available from our premises in Kent, England. A substantial industrial machine offering a large 1,350 × 600 mm working area, approximately 500 mm maximum stroke and 680 mm installation height. Suitable for a wide range of industrial cutting, die-cutting, punching, forming and manufacturing operations. Ijdpfx Anjz Icrtj Iobc Specification: 50-tonne press force 1,350 mm column width 1,350 × 600 mm table 1,350 × 600 mm ram Approx. 500 mm max. stroke Approx. 680 mm installation height 400 V Safety light curtain Separate hydraulic power pack Separate electrical cabinet Approx. 3,000 kg Approx. dimensions: 3,000 × 1,200 × 2,800 mm Manufacturer: SANDT Model: 540 Year: 1986 Machine No.: 808673-72951 Price: £5,000 or best offer Machine can be inspected in Kent, England. Buyer to arrange collection/transport. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks,

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Hydraulic press Dunkes HS2 63, year of manufacture 1999 Iedpszu Arvofx An Iobc Eccentric press Ebu 75, year of manufacture 1985

Condition: excellent (used), Year of construction: 1966, Exner 200 Pressure: 200 t Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between columns: 420 mm Hydraulic four-column press for embossing, upsetting, flow forming, calibrating, and punching Type H4SP 200 S 1101-3 Year of manufacture: 1966 _____ Downward pressure capacity: approx. 200 tons Upward retraction force: approx. 20 tons Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns at the front: 420 mm Laterally: 220 mm Installation height, table to ram (top): 380 mm Ram stroke: approx. 200 mm Piston / column diameter: 270/120 mm Piston bore: 50 mm Closing speed of the ram: - Rapid traverse / working stroke / ram at 330/10/180 mm/s Ibedpfxoz N Tf Uo An Iec Total power consumption: approx. 15 kW - 380 V - 50 Hz Weight: approx. 3,000 kg Machine dimensions: approx. 1.4 x 1.3 x approx. 2.75 m Accessories / special equipment: Sick light curtain

Condition: used, Year of construction: 1978, Hydraulic Shear SAGITA BEYELER 3100 x 4 mm Cutting length: 3100 mm Maxi thickness: 4 mm Electric Back gear gauge travel: 1000 mm Throat depth: 300 mm Year of construction: 1978 Isdpez Nfxgsfx An Isbc 13 hydraulic sheet-metal clamps Blue electrical cabinet not used because it was used for the rear sheet metal conveyor There is a slight hydraulic leak at the left cylinder Supplied with a new replacement blade + front stop Voltage: 380 V Length: 3700 mm Depth: 2400 mm Height: 1500 mm Weight: approx 5 T

Condition: good (used), Year of construction: 1990, Used plate shear from Haco Isdpfx Anjz Il Idj Ijbc Type TS 3006 Capacity 3100 x 6 mm Adjustable back gauge and cutting angle Manually adjustable shear gap

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW Ibodpfotndu Uox An Ioc CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Frame width 710 x 710 mm. Ibodpfezz Iu Aex An Ijc Stroke 500 mm. Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. From a small operation. Also interesting as a source of spare parts.

Condition: used, functionality: fully functional, Year of construction: 2020, Guillotine Shear / Sheet Metal Shear - Safan Darley M-Shear 310-6 TS200 – Year 2020 Ibjdpoy Em Skofx An Ioc

Condition: used, Year of construction: 1991, Panel shear Fasti, manufactured in 1991. Iedpfxozu Itle An Iobc

Condition: good (used), Year of construction: 1991, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 Ibjdpfxoz H U Rfs An Ijc -Pressing force: 160 tons -Motor: 22 kW -Clamping table: 810 x 870 mm -Max. insertion height: 500 mm -Max. stroke: 250 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1900/1800/H4200 mm -Weight: kg

Condition: new, Year of construction: 2026, CKT 320 × 750 CNC Lathe is an advanced CNC turning machine designed for precision machining of metal components in medium and large production facilities. Equipped with the Siemens Sinumerik 808D CNC control system and a hydraulic machine configuration, it delivers high productivity, reliability, and excellent machining accuracy. Key Features of the CKT 320 × 750 CNC Lathe Ijdpfx Anoi Apg Uo Iebc The CKT 320 × 750 CNC metal lathe combines precision, flexibility, and durability, meeting the requirements of professional workshops and industrial production environments. As an advanced industrial CNC lathe, it enables complex machining operations such as turning, threading, grooving, and drilling while maintaining excellent component quality. Main Advantages High machining precision – maximum swing over bed of 320 mm, swing over cross slide of 90 mm (optional 135 mm), 51 mm spindle bore, and maximum bar diameter through spindle of 44 mm ensure accurate machining across a wide range of applications. Flexible spindle system – spindle speed range of 100–2500 RPM with an MT5 spindle nose allows machining of various materials, from steel to lightweight alloys. Advanced CNC control – Siemens Sinumerik 808D Advanced with Polish-language interface and Siemens servo drives improves programming efficiency and production performance. Rigid machine construction – net weight of 1040 kg (gross weight 1300 kg) and dimensions of 2370 × 1420 × 2000 mm provide excellent stability when machining workpieces up to 750 mm in length. Efficient tooling system – 4-position turret (optional 6 or 8 positions) with 16 × 16 mm tooling reduces tool change times and improves cycle efficiency. Hydraulic components – hydraulic 3-jaw chuck and hydraulic tailstock ensure fast, precise, and reliable workpiece handling. Long service life and reliability – automatic lubrication system for gears and guideways minimizes wear and extends machine lifetime. Optimized cooling system – protects tools and workpieces, ensuring stable machining conditions and high surface quality. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries. Energy-efficient operation – 5.1 kW (S1) / 3.7 kW motor combines high performance with optimized energy consumption. Customizable configuration – optional features such as Fanuc Oi-TF control, tool probe, and CAD/CAM software integration allow adaptation to specific production requirements. Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Hydraulic 3-jaw chuck 4-position turret (optional 6 or 8 positions) Complete set of soft jaws Hydraulic tailstock with MT3 center Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting Technical and operating documentation CE Declaration of Conformity Technical Specifications Specification Value Swing over bed 320 mm Swing over cross slide 90 mm (optional 135 mm) Distance between centers 750 mm Spindle speed range 100–2500 RPM Spindle bore 51 mm Spindle taper MT5 Number of tools 6 Tool size 16 × 16 mm Maximum bar diameter through spindle 44 mm Tailstock taper MT3 Maximum tailstock travel 100 mm Main motor power 5.1 kW (S1) / 3.7 kW Machine dimensions (L × W × H) 2370 × 1420 × 2000 mm Net / gross weight 1040 / 1300 kg

Condition: excellent (used), Year of construction: 1990, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control ELGO TYP 85 oil volume 120 ltr. engine output 13.0 kW weight 6300 kg. range L-W-H 3950 x 1950 x 1680 mm very well-maintained condition (!!) Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC "Type 85" control unit * Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment Ijdpfxsz N Hxne An Ijbc - NC motorized backgauge * With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual

Condition: good (used), Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Control system renewed 5 years ago Ijdozkg Igepfx An Iebc The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Ibedpfxoz Rnn To An Isc Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, sheet thickness (max.): 6 mm, HACO SHEARING MACHINE Ibjdpfsz Sbxpex An Iec 3000 X 6 HYDRAULIC MODEL: HSLX 3006 MOTORIZED BACK GAUGE IN GOOD VISUAL CONDITION USED MACHINE, IN WORKING ORDER INTERNAL CODE: SVR 448

Condition: good (used), functionality: fully functional, Year of construction: 2014, Equipment: hydraulics, quick-change device, We are selling a "POWERTILT" from the leading manufacturer BERGAUER, equipped with an HKS rotary actuator BVC 250, with 2 pins, d=70mm, and a HYDRAULIC quick coupler Verachtert CW 30! Iodpfxjyzncpj An Iebc Suitable for various excavators and CW20, CW30, and CW40 buckets (560mm clear width between the "hooks"). Manufacturer: BERGAUER (very good quality manufacturer!) Bucket pin and coupling: 70mm pins For bucket stick width of 300mm Excavator size of approx. 15-30 tons. The tilt coupler was used very little and is in very good condition. Construction made of HARDOX, bushings and pins are in top condition, see photos. Sale is made with exclusion of warranty and guarantee. Sale only to dealers or commercial customers. The price is €7,500 net plus 19% VAT. New price: €15,000 net. Collection in Bad Staffelstein or transport to you for an additional charge (we will gladly calculate transport costs if you provide the destination). We also have a package of excavator buckets and a sorting grapple with a Verachtert quick coupler for sale; check out our other offers!