Used Weeke Bhc 200 for sale (21,252)

Condition: new, Description The wide F2-200 mowing units have a lateral displacement of 40 cm (-10 cm to +30 cm from the mowing unit axis) and are equipped with a suspension system that is compatible with tractors in Category II. The robust housing ensures high stability and durability. The mowing units have a single-sided drive system with belt transmission for 5 XPB belts, which is protected by safety devices. The gearbox transmits a power output of 60 to 120 hp. The recommended PTO speed is 540 rpm, which results in a cutting rotor speed of 2380 rpm. The cutting height can be adjusted with guide skids, and the discharge hood is adjustable in four positions. The travel speed should be adapted to the terrain and should not exceed 10 km/h. The rotors of the F2 series mowing units are electronically balanced and have replaceable pin bolts. These are mounted on robust oscillating roller bearings with seals and covers, which are housed in steel housings. Technical data Min./Recommended power 60/120 hp Recommended PTO speed 540 rpm Mounting system Three-point linkage Lhedpfxo Abnuas Amzon Mowing width 200 cm Flail mower dimensions 2164 x 1010 x 1015 mm Flails 20 pcs. Gearbox One-way clutch Rear roller 168 mm Shaft diameter with flails 420 mm Lateral displacement 40 cm Weight 700 kg

Condition: new, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and high running smoothness In the lower range of tank sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile units in the tank size range of 50 - 200 l: • Check valve • Relief valve • Pressure gauge • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug For stationary compressors in the tank size range of 50 - 500 l: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Pressure gauge • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve Intake capacity l/min 560 Delivery rate l/min (at 7 bar) 400 Motor power kW 3 Rated voltage V/Hz 400/50 Compressor speed min 1,215 Max. pressure bar (g) 10 Tank capacity l 200 Stages 2 Weight kg 148 Dimensions l/w/h in mm 1,400/550/1,050 Intake capacity l/min: 560 Delivery rate l/min (at 7 bar): 400 Max. pressure bar (g): 10 Tank capacity l: 200 Ledj Abn Igopfx Amzehn Weight kg: 148 Rated voltage V/Hz: 400/50 Compressor speed min: 1,215 Stages: 2 Dimensions l/w/h in mm: 1,400/550/1,050 Motor power kW: 3.0

Condition: new, AC = AC welding for simple welding tasks Does not comply with EU noise emission directive 2000/14/EC Stepless welding adjustment Low oil level shutdown Generator overload protection Carrying handles Synchronous generator type Max. output 1~ [kVA/kW] 6.5/5.9 Continuous output 1~ [kVA/kW] 5.9/5.3 Rated voltage [V] 230 Rated current [A] 25.7 Power factor [cos φ] 0.9 Frequency/protection class [IP] Welding power adjustment range [A] 60 - 200 Open-circuit voltage [V] 45.0 ÷ 60.0 Min./Max. welding voltage [V] 22.4 / 28.0 Welding operation at 60% duty cycle [A] 180 Welding adjustment, mechanical Engine type Design: 1-cylinder, 4-stroke OHV Displacement [cm³] 389 Power at 3000 rpm [kWm] 6.4 Fuel: Gasoline Fuel consumption at 75% load [l/h] 2.1 Runtime at 75% load* [h] 3.1 Starting system: Recoil starter Sound power level LWA [db(A)] 99 Weight approx. [kg] 95 Dimensions L x W x H [mm] 890 x 490 x 570 Protective contact sockets: 2 x 230 V / 16 A Lsdpfxo Abn Dne Amzohn

Condition: new, Construction film, 200 µm, length 50,000 mm, width 4,000 mm, polyethylene, transparent. Lhedpfx As Abpy Djmzsn · Transparent · Rolls of 4 x 50 m · Dimensional tolerance ± 5% · Sales unit = 1 roll = 200 m² / Price per roll Thickness: 200 µm

Condition: new, Energy-saving due to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and high running smoothness In the lower range of pressure tank sizes, up to 200 liters, they are available in mobile or stationary versions. for mobile versions in the pressure tank range of 50 - 200 l • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 l • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper up to 4 kW motor power: Ljdj Abn S Espfx Amzshn • 3 m connection cable with plug • Relief valve from 5.5 kW motor power: • automatic star-delta starter for wall mounting • Solenoid valve with silencer Suction capacity l/min 460 Delivery rate l/min (at 7 bar) 340 Motor power kW 3.0 Rated voltage V/Hz 400/50 Compressor speed min 990 max. pressure bar (g) 15 Tank capacity l 200 Stages 2 Weight kg 148 Dimensions l/w/h in mm 1,400/550/1,050 Motor power kW: 3.0 Stages: 2 Weight kg: 148 Tank capacity l: 200 max. pressure bar (g): 15 Dimensions l/w/h in mm: 1,400/550/1,050 Rated voltage V/Hz: 400/50 Delivery rate l/min (at 7 bar): 340 Compressor speed min: 990 Suction capacity l/min: 460

Condition: new, Gasoline-powered welding generator – Honda GX390 engine – Asynchronous generator, three-phase – Three-phase power output: 6 kVA – Single-phase power output: 4 kVA – Maximum welding current: 155A The TS-200 BS / EL welding generator is a lightweight machine with electronic welding current control. Equipped with an 11.1 HP HONDA GX-390 gasoline engine and an asynchronous generator, it can be operated simultaneously as a welding generator and as a power generator. The TS-200 BS / EL can be used to weld all types of electrodes (basic, rutile, cellulose) up to 3.25 mm in diameter. This welding generator is suitable for a wide range of applications, from maintenance work to moderate use on construction sites. Complies with CE directives. WELDING - Adjustment range: 20 ÷ 155A - Welding DC current: 155 A 60% - 120 A 100% - Open circuit voltage: 65 V - DC arc welding generator - Welding with all types of electrodes possible, including cellulose electrodes - Welding current control - Electronic - Power generator AC, three-phase and single-phase - Auxiliary power available even during the welding phase GENERAL - Sockets: 1x400V 16A 3P+N+T CEE - 1x230V 16A 2P+T CEE - 1x48V 32A 2P CEE - Engine stops when oil level is insufficient (oil alert) - Tubular frame - Weight (dry): 106 kg - Dimensions: 870x525x590 mm - Sound power level Lwa (sound pressure LpA): 98 dB(A) (73 dB(A) @ 7 m) WELDING (D.C.): *: * Maximum power (not overloadable) according to SAE - J1349 Single-phase power output: 2 kVA / 48 V / 41.6 A Engine: Gasoline, 4-stroke, OHV, air-cooled Three-phase power output: 6 kVA / 400 V / 8.7 A Sound power level Lwa (sound pressure LpA): 98 dB(A) (73 dB(A) @ 7 m) Protection class: IP 23 Fuel consumption (welding 60%): 2 l/h */: * The specified values also include all protruding parts. / For fixed installation in the EC market. Insulation class: H * Weight (dry): 106 kg GENERAL DATA: * Dimensions L x W x H (mm): 870x525x590 Runtime (welding 60%): 3 h Tank capacity: 6.1 l Cylinder / Displacement: 1/ 389 cm³ Lsdpfx As Abqd Dsmzshn Single-phase power output: 4 kVA / 230 V / 17.4 A Type: Honda GX 390 Speed: 3000 rpm A.C. Generator: 50 Hz - Three-phase asynchronous generator, self-excited, self-regulating, brushless Booster - Starter for engines: 170A - 12V d.c. - 24V d.c. * Maximum net power: 8.2 kW (11.1 HP) Open circuit voltage: 65 V Adjustment

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Lhodpfx Aezvhkyemzen

Condition: used, This listing is for a compact, tabletop BRANSON 200 ultrasonic cleaner. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF011 Ledpfx Asxzicnemzohn Listing name: BRANSON Ultrasonic Cleaner 200 Ultrasonic Cleaner

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Ljdpfx Aexvivqemzohn Location: ex-site Saarland

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height Lhodew Hl Aqspfx Amzon 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Lhodpfoy Iu N Aox Amzon Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: good (used), Forced mixer Ledpfx Ajx N Evvomzshn

Condition: used, mileage: 637,225 km, power: 155 kW (210.74 HP), fuel type: diesel, overall weight: 12,000 kg, tire size: 19, gearing type: mechanical, suspension: parabolic leaf (spring), Year of construction: 2000, Equipment: cabin, Car has conteiner system hook.....car starts and drives normally.....trader or export..... Lhodpjrqf Egofx Amzon

Condition: used, Technical details: diameter: 200 mm passage: 50 mm width: 65 mm weight of the machine approx.: 45 kg stationary vice SSH 200 Power chuck, hydraulic Lhsdpfsu Nln Dex Amzon Features: Chuck flange Ø 280 x 17mm with clamping groove 4x / 18x30mm base flange Ø 290x30mm flange mounting Ø 140x10mm 20 set of different jaws *

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm tank capacity: 800 l Heating: 45 KW cycle time: - sec Heating capacity: 45 kW container volume: 800 l electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 70 KW Lsdpfxjymc Txs Amzehn daylight opening: 2000 mm space requirements of the machine approx.: 3.8 x 3,3 m dimensions of the machine approx. HxWxD: 3,1 x 3,3 x 3,72 m internal dimension: 1,8 x 1,0 x 1,0 m *

Condition: used, mileage: 199,998 km, power: 154 kW (209.38 HP), first registration: 07/2018, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 45 m³, loading space length: 7,525 mm, loading space width: 2,510 mm, loading space height: 2,403 mm, Equipment: ABS, cruise control, differential lock, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Mercedes-Benz Atego 1521 Box Van E6 - Box body - Tail lift - Automatic transmission Lhsdpfxez S Inie Amzjn - Active cruise control - ABS/ASR/ESP - Lane-keeping assist - Leaf and air suspension - EURO 6 - Tires: 275/70R22.5 Very good condition, German vehicle, export price.

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Lsdpfozh Icyox Amzshn Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Year of manufacture: 2005

Condition: like new (used), functionality: fully functional, A very nice booklet maker is for sale. Lhedpfxez Sqdaj Amzjn Brand: Plockmatic, type BM 200 (BK5010) Equipped with folding, stitching, trimming, and square folding functions, as well as automatic format setting. Low counter reading. This machine is in very good condition and is 100% operational. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Regards, Henk Hoos.

Condition: used, CTS Temperature testing chamber / Stress screening chamber CTS TS-70/200-5/S temperature testing chamber Temperature testing chamber, -70 °C to +180 °C, approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Device type: Temperature testing chamber / Stress screening chamber Test chamber volume: approx. 200 liters Test chamber dimensions: approx. 650 x 400 x 750 mm (W x D x H) Housing dimensions: approx. 920 x 1345 x 1800 mm (W x D x H) Weight: approx. 550 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 8 K/min Temperature change rate, cooling: approx. 6 K/min Max. heat radiation at +20 °C: approx. 3500 W Actual test run according to protocol: Heating: approx. 10 K/min Cooling: approx. 6.25 K/min Temperature test from -70 °C to +180 °C documented Power connection: 400 V 3/N / 50 Hz Power: 10.9 kW Rated current: 15.7 A Protection class: IP22 Refrigerant pre-cooling stage: R404A Refrigerant quantity pre-cooling stage: 2.5 kg Refrigerant cooling stage: R23 Refrigerant quantity cooling stage: 0.6 kg / 15 bar Operating pressure PS: 25 bar Test pressure PT: 20 bar Operating hours according to protocol: approx. 25,977 h Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side access ports as shown in the pictures Insert grid / Test chamber equipment as shown in the pictures Over-temperature test item protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Accessories as shown in the pictures Application areas Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x CTS TS-70/200-5/S temperature testing chamber Insert grid / Test chamber equipment Existing documentation / documents Accessories as shown in the pictures Lhedpszf Hi Hofx Amzsn Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding possible. Changes, errors and prior sale reserved. We would be happy to answer any further questions by telephone.

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Lodpjziiz Hjfx Amzjhn Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Ledpfx Amszgbq Ijzshn Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Ljdpfezg Tpvsx Amzjhn Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Lodpoy Hkgbofx Amzehn Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature Shock Test Chamber Type: TSS-70/350-A Year of manufacture: 10/2017 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS GmbH (Clima Temperatur Systeme), model TSS-70/350-A. The device is suitable for temperature shock tests and cyclic temperature tests in industry, research, development, and quality assurance. Areas of application: Material testing Aging tests Electronics and component testing Temperature cycling and shock tests Automotive and quality testing Technical data: Manufacturer: CTS GmbH Type: TSS-70/350-A Design: Shock test / Temperature shock test chamber Temperature ranges: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +100°C Electrical data: Rated voltage: 400 V, 3/N, 50 Hz Rated power: 19.8 kW Rated current: 46.5 A Refrigeration system: Pre-cooling stage: R452A, 7.2 kg Cooling stage: R23, 2.8 kg / 11.0 bar CO₂ equivalent: 15.41 t / 41.59 t GWP: 2140 / 14800 Water-cooled Pressure data / Protection class: Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 54 Equipment / Features: CTS touchscreen control panel Microprocessor-controlled regulation and monitoring system Program operation Digital setpoint and actual value display 2-zone system with hot and cold chamber Trolley system for rapid temperature shock testing Viewing window in the door Integrated control cabinet Water connections for cooling water available Technical design: Hot and cold chambers are separated Trolley system for rapid temperature change Test chamber made of stainless steel Robust industrial design Connections for cooling water supply and cooling water return available Connection type according to documents: CEE 63A Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram, piping diagram, and installation plan available Spare parts list and quick guide available For your security as a buyer: The following points can be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Optical condition see pictures Scope of delivery: Lhsdpfx Aey H Hk Asmzjn CTS Temperature Shock Test Chamber TSS-70/350-A Documentation as available Note: The sale is of a used industrial device. An inspection by arrangement is possible and recommended. Loading and transport can be arranged by agreement. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Lhedpfx Ao Aax Dcjmzen Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm