Used Weiler Konventionell for sale (235)

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Nedpfx Aoz N H Dqoi Tewn Tailstock internal taper MK 2 Drive power 1.1 kW and 1.5 kW, pole-reversing Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Weight 325 kg Good condition

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. Nwjdpjzcv Egefx Ai Ton 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed

Condition: good (used), Year of construction: 2007, cycle controlled lathe Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Nsdpjzizd Tofx Ai Town Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Nwjdpfszxr R Nsx Ai Ton

Condition: like new (used), Weiler Voest DA210, an original fixed and adjustable sun visor, in very good condition. Nsdpfxjz N Smws Ai Tewn

Condition: reconditioned (used), Year of construction: 2001, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 2001 – partially overhauled Newly painted RAL 7035 light grey Machine No.: 4790 Center height: 160 mm Distance between centers: 650 mm Warranty: 6 months on the mechanics, which have been partially overhauled by us. The warranty does not cover the electrical and electronic components, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, the travel costs must be borne by the customer. Geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Lever-type collet quick-change chuck for collet type K32 (386E) - Covered guide and lead screw Nodpfxozy Ngqe Ai Tewn - Braked drive motor - Coolant system - Electrically secured chuck guard, new - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

Condition: excellent (used), For sale is a Weiler C30 x 750 DJ02 lathe from 2008 in very good, well-maintained condition. The machine comes from a training environment and has been used accordingly with care. It is in very good technical and optical condition and has its original paint. Technical data / Equipment: * Manufacturer: WEILER * Model: C30 x 750 DJ02 * Year of construction: 2008 Njdpsz Aitpefx Ai Town * Type: Conventional lathe * Application: Training / Workshop * Very good, well-maintained condition * Original paint Accessories / Scope of delivery: * New collet quick-change system * 3-jaw chuck * Multifix B quick-change tool holder * Technical documentation Due to its very good condition, the machine is ideal for training companies, workshops, locksmiths, mechanical production, and general workshop use. Inspection possible by arrangement. WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED 9/7 kW Speed range 1 – 4,500 min-1 Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Cross 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force cross 3,000 N Max. rapid traverse speed longitudinal/cross 6/3 m/min THREADING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 Gg./inch TAILSTOCK Arbor diameter 50 mm Arbor stroke 110 mm Internal taper DIN 228 MK 3

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Nwjdpfx Aijr Dvqze Tsn Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 min/-1 Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Nwodezq R Ecopfx Ai Tsn Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet Nodpoy T Hqcsfx Ai Tswn About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Nwsdjxp Rvlspfx Ai Tsn

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Nwjdpfx Aexp Ru Uei Ton

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop Nwsdpfx Aieyyb T So Tsn About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock Nodpfx Aisyylqhj Town >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 Nwjdpfjyylq Uox Ai Ton >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected while powered on. Nwedpfxjx Htf He Ai Tsn Technical data: Center distance: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: ready for operation (used), functionality: fully functional, Weiler Commodor in good working condition. Specifications: Swing diameter over bed: 380 mm Swing diameter over cross slide: 190 mm Njdpfxex Ngpds Ai Tewn Distance between centers: 1000 mm Spindle bore: 56 mm Speed: 25–2000 rpm Motor power: 4 kW Machine equipped with: 3-axis digital readout 3-jaw chuck with multiple jaws Coolant system Multifix quick-change tool post with 4 holders Collet system with collets Bed stop

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Nwjdpfjzg Hvvsx Ai Tjn Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, 2 tool holders.

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Spindle bore: 36 mm Spindle speed: 56 – 2000 rpm Nsdpfxeypbypo Ai Tjwn Tailstock: MT 3 Drive power: 2.4 kW Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Digital readout: Optional at extra cost Accessories: Additional accessories available on request!

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R -Turning diameter over bed: 300mm -Turning diameter over cross slide: 150mm Nwodpfx Aiszbiyhj Tjn -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch, etc. -Tailstock: MK 3 -Three-jaw chuck -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Nwsdpfxsthd She Ai Tjn Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Njdpfxjymdymj Ai Town Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: good (used), Year of construction: 2003, Main spindle X-axis: 200 mm Z-axis: 345 mm Spindle speed: 6,000 rpm Bar passage: 42 mm Total power: 22 kW Machine weight (approx.): 5,000 kg Nsdpfx Aiezwplhe Town

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. Njdpjy Ty Ihefx Ai Tswn A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Nwedpfx Asztf A Uji Tjn Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery