Used Weingarten Drd Iv for sale (2,090)

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm Dujdpfx Adsfx Hv Hs Njt dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm Djdpfscxxwcjx Ad Nsut stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. Duodpot Ucpbefx Ad Njt The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: used, Pressure: 200 t Length of stroke: 40-180mm Strokes by minute: 32 Up table size: 630x500mm Down table size: 900x800mm Dsdpfs Dvi Usx Ad Nout Technical characteristics: AIR CLUTCH Power: 15 HP DIMENSIONS: Height: 3000 mms Width: 1000 mms Length: 2750 mms Weight: 14000kgr New electric system

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Year: 2006 Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Dsdpjy Icgiofx Ad Njut Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: YAM0035, power of the servo motor: 1,200 W, input voltage: 230 V, clearance between the columns: 80 mm, type of input current: AC, throat depth: 150 mm, feed length X-axis: 30 mm, feed length Y-axis: 85 mm, feed length Z-axis: 12 mm, pneumatic connection: 10 bar, AMF REECE ATLAS Mark IV Automated Waistband Machine (2020) Modern High-Speed Production System – Video Ready Category Description For sale is an AMF Reece Atlas Mark IV automated industrial sewing unit, manufactured in 2020. This is a modern programmable production system designed for high-precision and repeatable garment component manufacturing. This is not a standard sewing machine but a fully automated unit capable of executing pre-programmed sewing cycles with high accuracy and consistent quality. The machine has been used in a professional garment production environment and is offered as a complete industrial workstation. Year 2020 Modern digital control system Dodjy Nd Ukopfx Ad Njut Production-ready configuration Key advantages Modern generation machine with low mechanical wear Fully programmable sewing operations High repeatability and precision Suitable for continuous industrial use European-built unit with strong parts availability Key features Programmable automated sewing cycles Integrated touchscreen control interface Pneumatic-assisted operation High precision stitch control Stable heavy-duty construction (Kessler base) Designed for continuous production environments Fast changeover between sewing programs Includes AMF Reece Atlas Mark IV machine unit Integrated control system with touchscreen Pneumatic components Industrial table and Kessler base Thread holders Technical details Manufacturer: AMF Reece Model: Atlas Mark IV Year: 2020 Serial number: YAM0035 Power supply: 230 V, 1-phase, 50/60 Hz Power output: 1.2 kW Current: 8 A Origin: Czech Republic CE marked Pneumatics required Condition Used industrial condition From professional production environment Typical signs of use Sold as-is, where-is, without warranty Inspection possible before purchase Applications Belt loop operations Pocket attachment Denim component sewing Workwear production Automated garment part manufacturing Repetitive precision sewing operations Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 213294, workpiece length (max.): 1,000 mm, The Mazak INTEGREX 200-IV T CNC lathe is an advanced 5-axis turning and milling center that combines turning and milling functions in one device, used in the aerospace, automotive and tool manufacturing industries. Djdpfx Adev R Uv Ao Njut The machine is in very good condition; it worked 5 days a week for 8 hours. In recent years, it has been used sporadically. Liquidation of a service plant.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: stationary, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. Dujdpfey Hi D Sex Ad Net The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, loading space length: 103,500 mm, loading space width: 26,000 mm, loading space height: 37,300 mm, Year of construction: 2014, For inquiries about the vehicle, Mr. Seidel will assist you (by phone at r RZK/18 IV refrigerated box with tail lift. Cooling: Carrier Supra 950U, tail lift: BÄR BC 2000S4-C4, BPW axles, permissible total weight: 18,000 kg, unladen weight: 6,980 kg, payload: 11,020 kg, cargo space dimensions: L 6,830 mm x W 2,490 mm x H 2,330 mm, cargo volume: approx. 40 m³, tire tread: 1st axle 5-7 mm, 2nd axle 5-6 mm. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Further information can be found on our homepage. ... Errors, changes and prior sale excepted! = Further information = Gross vehicle weight (GVW): 18,000 kg. Please contact Tobias Ebert for more information. Duodpfx Adsynrhhs Not

Condition: used, loading space length: 74,400 mm, loading space width: 24,900 mm, loading space height: 22,900 mm, total width: 26,000 mm, total height: 37,300 mm, Year of construction: 2013, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). RZK/18 IV Refrigerated Box Tandem Trailer Cooling unit: Carrier Supra 950U, Tail lift: BÄR BC 2000S4-C4 (2,000 kg), Through-loading, BPW axles, Wabco ABS, Disc brakes, Spring-loaded brake, Air suspension, Additional spotlights: Left and right sides, rear of vehicle, Permissible total weight: 18,000 kg, Unladen weight: 6,980 kg, Payload: 11,020 kg, Cargo area dimensions: L 7,440 mm x W 2,490 mm x H 2,290 mm, Tire tread: 1st axle 14-15 mm, 2nd axle 6-8 mm Leasing or financing options available upon request. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! = Further Information = GVW: 18,000 kg Dujdpfoyfvikox Ad Njt Please contact Tobias Ebert for more information.

Condition: used, mileage: 366,920 km, power: 251 kW (341.26 HP), first registration: 03/2020, fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro6, color: beige, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Our internal vehicle number: 1187 Solaris New Urbino IV 12 Power: 251 kW Emission standard: Euro 6D Vehicle class: M3 First registration: 03/2020 1st German ownership with inspection book Voith automatic transmission 1/2/3/D/N/R * 28+1 seats * LAWO destination display front/side/rear with control unit * Electric sunblind * Air conditioning * Rear-view camera * Door wing lock * Fold-out ramp * Large multipurpose area - wheelchair / stroller * Convector heating * 2x tilting windows per side installed * Original mileage * Vehicle was labeled - vinyl wrap * Pre-installed TFT screen wiring Note: Vehicle may be registered - mileage and condition may therefore differ The customer is obliged to independently verify the condition and equipment of the goods/vehicle! All information is provided without guarantee Subject to prior sale Please refer to our terms and conditions Duedpjy E D Nmsfx Ad Nst

Condition: good (used), functionality: fully functional, Resonance vibrating screen Screen surface: 1,600 x 3,600 mm with perforated plates on a heavy, stable base frame new electric drive Djdpfx Ajtpawlod Neut

Condition: used, empty load weight: 5,000 kg, maximum load weight: 12,000 kg, first registration: 07/2016, next inspection (TÜV): 08/2023, total length: 9,200 mm, total width: 25,500 mm, total height: 39,000 mm, suspension: air, tire size: 385 / 55 R 22.5 / 6mm, front tire size: 385 / 55 R 22.5 / 6mm, operation weight: 17,000 kg,

Condition: used, This listing is for the Palltronic Flowstar IV The unit is in full working condition and is ready for immediate use Palltronic Flowstar IV Filter Integrity Testing Instrument (and variants like Pall FFS04 S Palltronic Flowstar IV Filter Integrity Test Instrument / Pall Flowstar IV FFS04 Filter Integrity Tester) are precision filter integrity test instruments designed to check whether sterilising-grade membrane filters and associated assemblies have defects (like leaks or incomplete retention) before they are used in critical processes — particularly in pharmaceutical manufacturing and biotech Typical Uses These instruments are most commonly used in environments where sterility is critical: Dedpfxeyfhdms Ad Neut Final filtration before sterile drug product filling. Leak testing of single-use assemblies and filter housings. Quality control in vaccine production, biologics manufacturing, and related biotech workflows.

Condition: used, For sale is an agitator motor from YTRON. It is the model Y11.00FC-4/II10-IV. Data on the motor: RPM: 1470 V: 480 Dsdpfoga Dx Tex Ad Njut kW: 11 Connection: DN200 further data see type plate

Condition: used, Year of construction: 2010, Mazak INTEGREX 300-IV – Technical Data Year of manufacture: 10/2010 Model according to nameplate: INTEGREX 300-IV Serial number / Ass. No.: 221788 Power on time: approx. 50 000 hours General Machine Data Machine type: Turn-mill center Control: Mazatrol Matrix Chuck: Kitagawa B-212 (12”) Max. turning diameter: approx. 762 mm Max. machining length: approx. 1524 mm Djdpfx Aeyxm S Rjd Neut Bar capacity: approx. 76 mm Main spindle speed: 4,000 rpm Second spindle speed: 4,000 rpm Milling spindle speed: up to 12,000 rpm Tool magazine: 40 stations C-axis: 0.001° B-axis: 0.001° indexing X-axis travel: approx. 630 mm Y-axis travel: approx. 230 mm Z-axis travel: approx. 1585 mm Main power supply: 3 AC, 400 V, 50/60 Hz Control circuit: AC 100 V / DC 24 V Max. current: 80 A

Condition: used, maximum load weight: 11,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2013, Equipment: ABS, tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained, affordable vehicle with a verifiable service history from us! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration, export documents / EUR 1 certificate, and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a leasing, hire purchase, or financing offer. SERVICE TÜV general inspection / UVV tail lift inspection / LGS inspection / tachograph calibration / installation of onboard unit (OBU) and service by our authorized workshop in advance. TOLL / ROAD CHARGES Toll registration can be completed on site. TRAVEL / DISTANCES Wittlich train station: 500 m away Frankfurt Airport: 150 km away Frankfurt-Hahn Airport: 40 km away Djdpfxsyw D Sxs Ad Njut Luxembourg Airport: 75 km away Sale according to our General Terms and Conditions. The information provided online is non-binding and serves as a general description. It does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW Djdpfx Adoyy Thzo Njut X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Dodpfexuv Udsx Ad Nsut

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm Duedpjd Rxw Sjfx Ad Njt cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm Dodofnrw Sopfx Ad Njut disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Year of construction: 2015, condition: used, VISOMAT IV The VISOMAT IV is used for visual inspection of ampoules, carpoules, vials, infusion bottles and syringes according to foreign particles in the content as well as defects of the container and the closure. Device was purchased for a new project in a "blue chip" pharma company located in Ireland, but was never comissioned. Equipment is in excellent condition and available for viewing in one of our Cork locations. Dujdpoymyzaefx Ad Net Device is available for immediate dispatch

Condition: used, Year of construction: 2017, Year: 2017 Condition: good Schulze PRETREATmaker IV A unique device for applying penetrant liquid before textile printing. Thanks to the dimensions of the area it is capable of apply liquid (40x60 cm) is especially suitable for DTG printers M2, M3, M4, but of course also for printers with a smaller printing area flat, such as R-Jet, Brother GT3, Anajet, TexJet... The advantage is that it does not need a compressor. The machine is equipped with 4 independent and adjustable nozzles (you can apply only small area, e.g. when printing logos on hearts). Spraying time of full area 40x60 - 4.5 seconds. Optional spray size liquids of 2 cm each (2 - 60 cm length). Large clear LCD display. 5 storable positions/area and quantity settings injection. High efficiency and productivity of work. It does not need a compressor * The machine has 4 independently adjustable nozzles (you can apply only a small area, e.g. when printing logos on hearts) * Spraying time of full area 40x60 - 4.5 seconds * Optional liquid injection size of 2 cm (2 - 60 cm length) * Large clear LCD display * 5 storable positions/area settings and spray amount * High efficiency and productivity of work PRETREATmaker IV is a top-of-the-line device designed for the professional application of penetrating liquid to textiles. It has an advanced electronic system, which enables high performance and easier control during the textile pretreatment process. Clear color touch screen allows you to easily adjust the length and width of the spray and to easily adjust the spray volume. The device is equipped four nozzles, each of which can be switched on individually. This allows you to precisely adjust the area to apply the penetrating solution (Dupont Artistri, Image Armor, Brother...) but also saves a lot of penetration compared to applying by hand with a pressure/air gun. The length of the spray area can be regulated in 2 cm increments, using the touch screen. To set the amount of penetration liquid application, 10 values are available. Pre-treat maker IV also has an automated cleaning process for the spray nozzles (consumption approx. 12 ml per hour), which keeps nozzles through and prevents them from drying out or blocking. Spray area: 40 x 60 cm Spray method: Nozzles move above the table (inside) Table length: 80 cm Nozzles: 4 pieces Dimensions: T 90 x W 72 x H 48 cm Dimensions (for transport): T 95 x W 80 x H 61 cm Weight: 68 kg Weight (for transport): 86 kg Connection: 220/230 or 110/120 VAC (automatic switch) Consumption: 150 W Operating pressure (before coating): max. 7 bar Menu: 5 languages: German, English, French, Italian, Polish Measurement: "cm" or "inch" Included in delivery: spare nozzle, spare filter and ultrasonic cleaner Other features: galvanized and powder-coated housing Dusdpfx Aoufi Uwjd Nst

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 17,893 h, load capacity: 15,000 kg, lifting height: 1,980 mm, free lift: 1,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,380 mm, power: 122 kW (165.87 HP), fork carriage width: 1,800 mm, fork length: 1,590 mm, empty load weight: 23,000 kg, total length: 3,860 mm, drive type: Diesel, construction width: 1,800 mm, Compact forklift - diesel Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: standard Technical condition: very good Front tires type: solid rubber Front tires size: 40x16x30 Rear tires type: solid rubber Rear tires size: 28x12x22 Duodpfx Adjw Hh D Dj Net Heater, full cabin, full free lift, CE certificate,

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Djdpfoyt R Idex Ad Njut Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation