Used Wenzel Ruf 97 for sale (1,050)

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Iijdpsxazhtofx Ab Njb

Condition: refurbished (used), Year of construction: 2025, I sell the heavy duty briquetting press RUF RB440. Year 11/2002, Fully reconditioned with warranty 2025 Motor power 30kW Productivity Amount 440 pcs. wood briquettes / hr. Wood briquette RUF 150 x 60 x 40-110mm (depends on material) Ijdpfx Aswun I Eob Njib Material humidity up to 15% Nominal pressing power 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total power 3000kg Composition right - right side input Condition after full recondition / 500 working hours warranty like new. Available immediately. Including full documentation and CE.

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction Iedponxkrbefx Ab Neib - Direct incorporation into existing production facilities possible - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Condition: used, Year of construction: 2005, Overview  This semi-automatic filling and capping machine was manufactured in 2005 by the Italian company Officine Pesce. It was previously used in wine production and is now for sale due to lack of use. Technical data  Manufacturer: Officine Pesce S.n.c. Model: PG 97/M4 Year: 2005 Voltage: 220V Frequency: 50Hz Filling system: Semi-automatic Components: Accumulation tank Filling tap Electromechanical valve Bottle-holding plates Capping unit Control panel Pedal-operated mechanism Iijdpfxjwbanqo Ab Nob

Condition: used, Year of construction: 1997, machine/vehicle number: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower) and crosswise brush for table width, collects residual dust from components 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4,5 – UV lamp with conveyor – one lamp illuminating from above Isdpfxjy Sn Sro Ab Njib 6 – Quick Wood System RO1400 brushing machine 7 – Venjakob spray booth – 8 spray guns 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, temperature and airflow can be regulated in 3 zones 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well 15 – Four-shaft brushing machine with individual height and speed adjustment for each shaft 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for light surface dust removal 18 – Venjakob spray booth – single-circuit, but can be switched to a second by exchanging the entire spray gun rack (a spare is included) and switching the pump (two pumps included) 19 – Roller conveyor; lineup supported by photoelectric sensors for loading the dryer 20 – 14-shelf drying oven 22 – Outfeed table with two speed levels depending on the unloading speed required by the finishing line.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, alignment support -Square profile: clamping base, support profile, alignment base -Length: 503 mm -Number: 2x profile available -Price: per piece Iiedpfxsy Iv Rhj Ab Nob -Dimensions: 503/97/80 mm -Weight: 27.5 kg/pc.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, alignment support -Square profile: clamping base, support profile, alignment base -Length: 492 mm -Number: 7x profile available -Price: per piece -Dimensions: 492/97/80 mm Iijdpfx Absy Iv Nds Nob -Weight: 27 kg/pc.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, alignment support -Square profile: clamping base, support profile, alignment base -Length: 515 mm -Number: 3x profile available -Price: per piece Iodjy Iv Iyepfx Ab Neib -Dimensions: 515/97/80 mm -Weight: 28.3 kg/pc.

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Iijdpfxswv Uq Ae Ab Neb Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 129 h, load capacity: 1,500 kg, lifting height: 4,310 mm, free lift: 1,405 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Mast type: Triplex Transmission: Automatic Technical condition: New Iijdpfxsy Dwf Es Ab Njb Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Battery voltage: 24V Battery capacity: 1000Ah Battery year: 2023 Battery condition: 80 - 100% Description: Price includes new FEM safety inspection (UVV), unit refurbished in Still Bronze quality with 6 months warranty, battery reconditioned with Power Cycler including Kappa test at 97% (see last photo), suitable charger with connector included. We are happy to organize cost-effective transport for you. Leasing with an option to purchase is generally possible! We are an official Jungheinrich partner. Sideshift, Fork positioner, 3rd valve, 4th valve, Rear work light, Front work light, Roof cover, Full free lift, CE certificate, Multi-lever control

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,355 h, load capacity: 1,200 kg, lifting height: 3,300 mm, free lift: 1,630 mm, fuel type: electric, mast type: duplex, construction height: 2,143 mm, fork length: 1,150 mm, empty load weight: 907 kg, total length: 756 mm, drive type: Elektro, construction width: 770 mm, High-lift stacker Load centre: 600 Mast type: Duplex Technical condition: good Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Battery capacity: 105Ah Battery year: 2019 Impulse control, Full free lift, CE certificate, Iiedpfx Absy Dki Re Neb

Condition: excellent (used), mileage: 65 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,590 mm, first registration: 12/2024, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, power assisted steering, sliding door, traction control, = Additional Options and Equipment = - Apple CarPlay - Automatic dipped headlights - Heated exterior mirrors - Passenger bench seat - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Wireless mobile phone charging - Air conditioning - LED daytime running lights - Front centre armrest - DAB MP3 Bluetooth 4.0 radio - Rain sensor - Reversing camera - Side sliding door - Immobiliser - Twin rear doors - Partition wall - Partition wall without window = Further Information = Ijdsyww Rnopfx Ab Nsib General Information Number of doors: 2 Cabin: single Registration number: V-97-LRK Technical Information Number of cylinders: 4 Engine capacity: 1,997 cc Transmission: 6-speed manual gearbox Maximum front axle load: 1,950 kg Maximum rear axle load: 2,000 kg Dimensions Length/Height: L4H3 Dimensions (L x W x H): 569 x 208 x 250 cm Weights Unladen weight: 2,028 kg Payload: 1,472 kg gross vehicle weight (GVW): 3,500 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: grey Fuel Consumption Average fuel consumption: 5.9 l/100km Urban fuel consumption: 5.6 l/100km Extra-urban fuel consumption: 6.1 l/100km Maintenance APK (roadworthiness inspection): valid until 12/2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote control units)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,880 h, load capacity: 2,000 kg, lifting height: 1,700 mm, free lift: 76 mm, fuel type: electric, mast type: simplex, construction height: 1,348 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Pedestrian stacker Load centre: 600 mm Mast type: Standard Isdoyxtwyepfx Ab Nsib Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 26V Battery capacity: 105Ah Battery year: 2019 Description: Factory-refurbished used unit by Toyota, incl. new inspection and new approval according to FEM (formerly UVV). Pulse control, initial lift, CE certificate,

Condition: used, diameter / mm Cutting (quantity) / 0 weight / kg Iedpfx Aeylz Ileb Nsib Fan For extraction arms and telescopic arms Make: KEMPER No: 97/730091/03 Power: 0.75kW .: 4 AP 80-2S Revolution: 2840 rpm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: UWID/5000/97, grinding spindle speed: 10,000 rpm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, center height: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Iiedpfxsyh I U Ij Ab Nsb Feed rate X-axis: 0 - 20 m/min Feed rate Y-axis: 0 - 10 m/min Feed rate Z-axis: 0 - 20 m/min Centre height: 150 mm Usable table area: 980 x 185 mm Grinding head Swivel range: 240° Rotation speed: 120°/s Spindle diameter: 170 mm Spindle speed: 2,000 – 10,000 rpm Workpiece holder A-axis Indexing accuracy: ± 15″ Cumulative indexing error (at ∅ 100 mm): 8 µm Mount: ISO 50 Max. rotational speed: 50 rpm Position measuring systems resolution: 0.0001 mm / 0.0001° Tool magazine: 70 tools MACHINE DETAILS Control: NUM 1050 M with PC; Program memory: 512 KB Drive capacities Grinding spindle motor: 10 kW Table drive X-axis: 1.5 kW Workpiece holder A-axis: 1.5 kW Cross slide Z-axis: 1.5 kW Grinding head column Y-axis: 3 kW Grinding head rotation B-axis: 3 kW Electrical connection Connected load: 23 kW Main fuse: 63 A Operating voltage: 400 V, 50 Hz Control voltage: 24 V Lighting voltage: 230 V, 50 Hz Compressed air Air consumption: 10-12 Nm³/h Pressure min/max: 5/8 bar (500/800 kPa) Compressed air quality: ISO 8573-1, class 4 Ambient temperature Operation: 15°C - 35°C Weight: 7,400 kg Further documentation for the machine is available on request.

Condition: used, Year of construction: 1997, Technical Data: Year of Manufacture: 1997 Brand: Johannsen Manually operated machine, mobile on steering castors The machine is powered up and can be inspected by appointment! Max. working width: 650 mm Max. clearance height: 40 mm Min. clearance height: 0.5 mm Set feed height: max. 40 mm Workpiece length: 500 mm - unlimited Working height: approx. 900 mm Drive power: 0.75 kW Feed speed: approx. 7.9 m/min Operating voltage: 400/230 V, 3Ph / N / PE 50Hz Accessories/Special equipment: Underside film application Infeed roller conveyor 650 x 1200 mm, mobile, with omnidirectional rollers and adjustable lateral roller stop, non-driven Outfeed roller conveyor 650 x 1200 mm, mobile, with rubber-coated rollers, driven Machine frame (welded steel construction) equipped with all necessary safety devices. Safety light curtains at infeed and outfeed – easily accessible for film threading 1 standard upper film unwinder Iedjyfnrwjpfx Ab Noib Feed direction from right to left Operator side left in feed direction For film with a tendency to crease, a spreading roller (available at extra cost) must be used.

Condition: good (used), m Scope of delivery includes: inserted grating, used Material color: hot-dip galvanized Total depth: approx. 1,030 mm (support bar direction) for stand depth: approx. 1,050 mm Total width: approx. 1,335 mm (cross bar direction) Clear span: approx. 942 mm Mesh width: approx. 68 x 45 mm Support bar: TS30/1.80 Iiodpfjvqa U Rex Ab Njb Support: approx. 45 mm Internal designation: GR-97 Weight / piece: approx. 18.47 kg Note: The grating may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, axle configuration: 3 axles, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 4.500 kg Axle 1: left 7 mm right 13 mm Axle 2: left 5 mm right 9 mm Axle 3: left 8 mm right 12 mm We have the possibility to stack trailers!  Iijdpfx Aoqx Nzxob Nob

Condition: as good as new (ex-display), Shell end mills (24340) Diameter 86 mm and length 62mm Diameter 97 mm and length 63 mm Iiedpfx Absdwbk Do Njb Weight 4, 5 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm Isdsx S D U Ajpfx Ab Njib -Weight: 75 kg

Condition: used, Power cable, solar cable, fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, data line, video cable -Manufacturer: Lapp Kabel, data line on cable drum Iijdpfjivqm Tox Ab Neb -Type: UNITRONIC Li2YCY PiMF 5x2x0.5 ROHS -Cable drum: schill IT -Cable length: 97 m -Number: 7x cable drums available -Price per piece -Dimension: 410/260/H450 mm -Weight: 21 kg/pc.

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Gearbox manufacturer Bonfiglioli type: MVF44/F -Manufacturer engine AEG type: AD63NZ4 Isdpjci Evtefx Ab Noib -Speeds: rpm -Power: 0.18 kW -Construction: B5 angle -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 4x engines available -Price: per piece -Dimensions: -Weight: 7.2 kg/piece

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, gear motor with brake -Type: R43DT90S4BMG/HF/TF -Speed: 97 rpm -Power: 1.1 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Brake: 20 Nm -Number: 5x engines available -Price: per piece -Dimensions: 570/280/H210 mm -Weight: 33 kg Isdpfx Aechq Igob Njib

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, deflection roller -Conveyor belt rollers: Transport rollers, diameter 97 mm -Transport width: 650 mm -Shaft: Ø 20 x 120 mm -Bearing housing/ball bearing: SNR FC205 / UC205G2 -Bolt circle: Ø 90 x 12 mm -Quantity: 1x transport roller available -Dimensions: Ø 118 x 875 mm -Weight: 14.3 kg Iijdpfx Ajiqliweb Nob

Year of construction: 1987, condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from automatic cutting machine Bierrebi TA 103 -Manufacturer gearbox: Bonfiglioli type MVF 62/P -Speeds: approx. 97 rpm i= 1:15 -Manufacturer engine: Electro Adda type FC 715 -Power: 0.37 kW / 1450 rpm -Shaft: Ø 30 x 15 mm Iijdpjiidriefx Ab Nsb -Protection class: IP 54 -Dimensions: 485/143/H190 mm -Weight: 19.7kg