Used Woodtek High Speed Stacking for sale (44,717)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B-Control, year of mfg. 2006 - Tool area 750mm - Adjustable stroke 13 to 38mm - complete documentation Iisdpfx Abjwu Sy So Nsb - Soundproof cabin - Machine checked, in very good condition! contact us!

Condition: excellent (used), Year of construction: 2007, operating hours: 19,269 h, functionality: fully functional, BSTA 41, with 2x BBV 202/120+ scrap shear complete refurbished from Bruderer Swiss in 2007 CE possible Iodsuwlvdepfx Ab Noib Contact us!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 38 mm, input voltage: 400 V, punching force: 25 t, Bruderer BSTA 25USL with BBV 190/85 roll feed, - year of mfg. 2000 - Tool area 750mm - Adjustable stroke 13 to 38mm - complete documentation Ijdpfx Abswu Rubj Njib - Soundproof cabin - Machine checked, in very good condition! contact us!

Condition: used, Year of construction: 1991, functionality: unexamined, pressing force: 20 t, stroke length: 51 mm, overall weight: 3,600 kg, BSTA 200E press, year of mfg. 1991, in 2000 overhauled, with BBV 101/75 roll feed on right-hand side. Adj. stroke 8 to 51 mm Nominal capacity 20 tons Max. tool loading width 420 mm Available immediately ex-stock. Please contact us for more information! Iiedpfxew S Hags Ab Njb

Condition: used, Year of construction: 1976, arm length 1450 mm taper MK 4 Cube ja weight of the machine ca. 3 t Iijdpeyn R N Djfx Ab Njb

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. Iijdpfxjnygvrs Ab Njb 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Iisdpfx Ajyrf Aasb Nsb Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. Iisdpjyq Nyyjfx Ab Nsb The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting. Details: Iisdpfxoyrtkxj Ab Nob Manufacturer: Donau Model: DR23 Radial drilling machine overhauled by Vaumtec Quick-change chuck Stable cast construction Adjustable arm for flexible machining of large workpieces Suitable for steel, aluminum, and other metals Forward and reverse rotation

Condition: good (used), Year of construction: 1998, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm Iiedpfx Ajyplb Rsb Neb - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: used, functionality: unexamined, High-speed doors in various sizes, used and dismantled, price per door: €100.00 Iiedeynnv Ijpfx Ab Nob

Condition: new, In stock CW, XCW & DCW plate standard/ bevel quick-change welders for excavators . Hardox 400 price incl. VAT CW00 36,- CW05 115 CW10 174,- CW20 335,- CW30 400,- CW40 410,- DCW05 97,- DCW10 190,- DCW 40 410- XCW 00 30,- XCW 05 100,- XCW 10 120,- XCW 40 610,- Hole size 30 - 60 mm R 30 - 60 mm distance between hole and hook 150 - 475 mm Trading company Pieper Nijkerkerstraat 71 3882 PD Putten (Gelderland) Ijdpfx Ajf Tny Sob Neib

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Iiedpfxeynt Uce Ab Nob Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: excellent (used), Year of construction: 2010, KAWASAKI YF03N ULTRA-HIGH-SPEED DELTA ROBOT The Y series robots are parallel type pick & place robots offering quality and reliability. Brand Kawasaki Type YF03N Year of manufacture 2010 Serial number YF0030012 Electrical connection 400 V Overall dimension L 2400 mm Overall dimension W 2350 mm Overall dimension H 2750 mm Description of the Kawasaki YF03N robot Type Parallel kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) *1 ± 0.1 Movement range (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) *2 0.27s (1 kg) 0.45s (3 kg) Iiedpfx Aog T U Nbeb Nob Other: 400 volt; camera; software; instructions; components; iron frame, with switch cabinet; 2x connection cable 5-pole; control panel E40E-A003 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 1997, Press capacity: 315 ton Isdpfx Asuqd Tmjb Nsib Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Standard configuration The press was converted to CE standard in press was 2021 converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Iodpfx Ajquhbgeb Njib Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Iijdpfof Axn Ujx Ab Nsb Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Iedpfx Ajfxg T Ueb Nsib Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: used, Year of construction: 1987, functionality: unexamined, pressing force: 20 t, stroke length: 38 mm, overall weight: 3,600 kg, BSTA 20 H press, with BBV 190/85 roll feed on left-hand side, Year of mfg. 1987 Adj. stroke 8 to 38 mm Nominal capacity 20 tons Iiedpfx Aow S E Tljb Nob Max. tool loading width 420 mm For spare parts or overhaul/repairs. Sold in "as is" condition. Available immediately ex-stock. Please contact us for more information!

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm Iijdpsvphiyjfx Ab Nsb * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Iodoxz Ugxjpfx Ab Neib Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Iijdpfx Aeymnyksb Njb Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: used, Year of construction: 2003, operating hours: 6,431 h, Jungheinrich ESE 20 high-speed electric pallet jack truck RA2396 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90079958 Battery change: 2016 TÜV: until 2023 Operating hours: 6431 h Fork length: 1150 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Isdpfx Ajwb I Hbob Noib We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2003, operating hours: 4,267 h, Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Iodpowcqg Hsfx Ab Njib Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min Iodpfxjnl Sno Ab Nsib stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Make: Sankyo Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours