Used Yale Ms 15X-42 for sale (6,975)

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Nsdof Axn Aepfx Aa Reda Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Year of construction: 2009, condition: used, maximum capacity load 5,000 kg *lifting height 15 metres* number of strands 2 load chain 10 x 30 decoiling of hand chain per metre of lifting - 174 m lifting force at nominal load 34daN weight approx. 115 kg 1 unit on stock - price per unit Ndsdscw Tyiepfx Aa Roa  

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. Ndsdpjfibfaofx Aa Rea ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: used, Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 x 20 mm -Construction: B14 -Protection class: IP54 -Dimensions: 210/125/H160 mm -Weight: 5 kg Ndodpfxjfdkg Ns Aa Rja

Condition: used, Year of construction: 1984, Gear motor, electric motor -Manufacturer: Eberhard Bauer, gear motor type DO 42 F 04/141 -Speed: 250 rpm -Power: 110 W / 2700 rpm -Shaft: Ø 10 x 25 mm -Design: B5 -Protection class: IP55 Njdst Drkaopfx Aa Roda -Number: 4x motor available -Price per piece -Dimensions: 250/110/H110mm -Weight: 3.6 kg/piece

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW weight of the machine ca. t Ndodpfx Aaot Hwz Ae Rja dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed

Year of construction: 2016, condition: as good as new (ex-display), Axial fan condenser, air ccoler Manufacturer: Güntner Model: GCVC RD 035.1/12-42-0007305P Year of c.: 2016 2 fans Volume: 4,6 l Comressed air: 32,5 bar Njdpfx Aaonbff As Rjda

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Ndsdpfsh U A Evjx Aa Rea Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: ready for operation (used), Rexroth VT10861-42 proportional amplifier, material number 00548144, Q09 250788001, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ndsdpfoi Ec A Nox Aa Rea

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle head -Number: max. 2x drill bits/milling cutters -largest hole pattern spacing: 42 mm -Top opening: Ø 45 mm -Built-in collets: Ø 16 mm Ndjdpjb T Ti Esfx Aa Rea -Multi-spindle heads are variable tools -for various machining operations such as drilling, thread cutting, countersinking, reaming, -with which multiple holes can be machined at once -Dimensions: 120/110/H220 mm -Weight: 5.6 kg

Condition: good (used), - Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Vibrating bottles: 2 Ndedjb A Hg Sopfx Aa Rja -Cable length: 6m each -Weight: 100 kg

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes KBF / KBA 71 80 90 100 112 125 140 160 Very good used and tested condition Well below manufacturer's retail price Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory! Ndsdpfx Aov Uvuhsa Rja

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 136 mm / 37 teeth -Tooth width: mm -Shaft holder: inner Ø 72 mm -Bolt circle: Ø 100 mm M8 Nodpfx Aasxf A Eqo Rjda -Dimensions: see photos -Number: 6x gear shaft available -Price: per piece -Dimensions total: Ø 136 x 42 mm -Weight: 5.2 kg/piece

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 4.7 m -Type: DIX MS 330-4 SA -Transport dimensions: 400/480/H100 mm -Weight: 4.2 kg Njdpfx Aaex Nn Rps Roda

Year of construction: 2022, condition: used, functionality: fully functional, Selling a liquid chromatograph, SCIEX Triple Quad 6500+ with Shimadzu LC-40Dx3. Complete, well-maintained set; the instrument has not been fully utilized. Can be inspected in the laboratory. You are welcome to visit. Dismantling and transport are the responsibility of the buyer. Nsdpsyw Nf Dsfx Aa Reda

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings - New knives installed - Gearbox lubricated - New protective lamellae installed - Planing width: 630 mm Njdpfoyt Nx Uox Aa Rsda - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives - Central lubrication - Star-delta switch

Condition: good (used), Included in the scope of delivery: 01x rectangular tube, used Material color: orange Total length: approx. 1,980 mm Hole center-to-center: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (W x H) Material thickness: approx. 2.00 mm Bore hole Ø: 9 mm Weight: 5.04 kg | each General information about the item: Nsdpsw N Dx Uofx Aa Roda This item is offered for collection only. Any additional transport or shipping is subject to extra costs, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 40,724 h, functionality: fully functional, machine/vehicle number: 8018030323B, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item on time, no later than 15.11.2025! The following machines are also being sold exclusively via auction at the same location: Gildemeister GM 42-6, year 2005: Search ID A20302860 Gildemeister GM 42-6, year 2004: Search ID A20303020 Gildemeister GM 42-6, year 2007: Search ID A20303190 Gildemeister GM 42-6, year 2005: Search ID A20303220 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Ndodpsxnxkhofx Aa Rja Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool stations: 12 Max. bar diameter for round stock: 42 mm Max. bar AF for hex stock: 36 mm Max. bar side length for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed across two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, fwd/rev: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, fwd/rev: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 40,724 h EQUIPMENT Bar feeder (length: approx. 3000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 57,860 h, functionality: fully functional, machine/vehicle number: 4903-0261, The submission of a bid obligates the buyer to collect the item by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. side dimension for square stock: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. travel of radial slides: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. travel of axial slides: 72 mm Max. rapid traverse speed: 9.6 m/min Max. travel of tool spindles: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Ndsdpfx Aoxnxqbsa Roa Weight with bar feeder: 10,000 kg Main motor Rated power of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 57,860 h EQUIPMENT Bar feeder (length: approx. 3,000 mm) Work tables Additional accessories

Condition: used, Year of construction: 2006, Hurco VMX 42 i, Year of manufacture: 2006, Control system: Ultimax 4, Travel range X/Y/Z: 1060/610/610 mm, Tool changer: 40 positions, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Chip conveyor, Ndsdpfx Aozg E Nuea Rea Internal coolant system (IKZ), X and Y axes have slight play.

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit Ndodezg I Ugspfx Aa Rsa 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Ndsdpfx Aajyxn Dno Rja

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation Njdpfx Aouu Upgoa Rsda - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: used, mileage: 1 km, axle configuration: 4x4, gearing type: automatic, Year of construction: 2016, GVW: 970 kg Njdpjzhtydjfx Aa Roda Please contact Emal Jaweed for more information

Condition: used, color: orange, Empty weight: 455 kg Working width: 100 cm Ndedpezln S Aofx Aa Rea Required tractor power: 65 hp