Used **Used Mach Zone** Hydraulic Pressbrake for sale (73,663)

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm Djdpfx Aeu Ib D Eskmeku distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: used, Technical details: pressure: 6 t Dkodpju Nfm Tofx Akmju distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm Djdpeu Nfn Rsfx Akmsku ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: used, Year of construction: 1991, Technical details: Dedpfx Asu Nfp Ijkmeku pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Dodsu Nfwlopfx Akmjku Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Technical details: feed pressure: 60 bar Dodpfx Aeu N Eriekmjku drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar drive power: 11 kW 5 hydraulic power units for sale. - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Prices vary according to aggregate size. *

Condition: used, Year of construction: 2001, Technical details: Dksdju N E Hgepfx Akmou pressure capacity: 145 bar charging voltage: 24 V / 12 V V weight: 185 kg dimensions L x W x H: 1,0 x 0,5 x 0,8 m Hydraulic pressure 145 bar Input 230 v / AC Output 12 V / 200A or 24 v / 100A *

Condition: used, Year of construction: 1976, Technical details: tank capacity: 35 l motor: 1,1 Dkjdpfou N E Idox Akmou Flow rate: 12 l / min pressure capacity: ca. 24,5 bar total power requirement: ca. 1,2 kW dimensions L x W x H: 0,7 x 0,9 x 1,2 m For testing hydraulic systems Flow rate 1420 l/min. *

Condition: as good as new (ex-display), functionality: fully functional, sheet thickness (max.): 8 mm, overall weight: 6,500 kg, Used plate shear from Luther Werke. Dkjdpfxez Hbtgj Akmsu Capacity: 2500 x 8 mm Deep throat: 50 cm Sold as is, where is. Weight: 6500 kg

Condition: new, Year of construction: 2026, Hydraulic winch HAW3000 with electric valve and remote control for wheel loaders, excavators, cranes, mini-excavators, tractors for use in viticulture, horticulture, civil engineering, construction, and many other applications. The hydraulic attachment winch HAW3000 simplifies many tasks. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard equipment: 30 m of 8 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on forestry cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M12 threaded holes. This offers many possibilities for attaching the winch. (The threads are cut and painted. They must be re-cut before use for rust protection.) Dkedpjfn Tu Tsfx Akmju Large, greaseable rope pulley for a long service life of the wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, briefly max. 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at an oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00709, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Dksdpfxez Hywko Akmsu Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00707, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/45M manufactured in 2025.09. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.09 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Dedpfx Akoz Hywwemoku Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.09 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: excellent (used), mileage: 497,850 km, power: 345 kW (469.07 HP), first registration: 08/2018, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, = Additional Options and Accessories = - Aluminum fuel tank - Climate control - Sleeper cab - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer - Power take-off (PTO) = Additional Information = General Information Cab: single Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 7,350 kg Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 8000 kg; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80 R22.5; Max. axle load: 13000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Condition Technical condition: very good Djdpjzw Irajfx Akmjku Optical condition: very good Damage: none

Condition: used, Year of construction: 1985, sheet width 1000 mm plate thickness 5,0 mm distance between columns 1100 mm 1010 mm Cutting length variabel mm cutting gap adjustment variabel mm connected load 5,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 1,6 x 1,7 m Hydraulic guillotine shear with - Cutting gap adjustment - Support arms - Squaring arm Dkedpozhn Ucofx Akmsu

Condition: used, Year of construction: 1990, pressure 150 t distance between table / ram 660 mm table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press Dkodpfxjy Erv Ij Akmou - hole in table Ø 120 mm

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert Dkodpfx Aoy Urziokmju – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t Dksdpfx Aksyfwxtsmou dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: ready for operation (used), Year of construction: 2026, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm Dodjztfbwepfx Akmoku -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm Dkedpfx Ajgrkigokmou hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Dsdpfowi Snxjx Akmeku Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Specifications: Capacity: 400 L Dkjdsyma Dbopfx Akmju Construction Material: Stainless Steel Horsepower: 5.5 kW Jacket: No

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Vessel working temperature: -25/+120 ºC Dkodpeyxd D Rsfx Akmju Half-coil/jacket working pressure: -1/+6 bar Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Equipment configuration: -Agitator -Half-coil Specifications: Capacity: 8,190 L Internal Pressure: 6 bar Internal Temperature: 120°C Jacket Pressure: 6 bar Jacket Temperature: 120°C

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 320 mm, operating speed: 35 mm/s, reverse speed: 380 mm/s, table width: 560 mm, table length: 710 mm, table height: 850 mm, throat depth: 320 mm, distance table to ram: 460 mm, oil tank capacity: 365 l, total length: 1,200 mm, total width: 3,200 mm, total height: 2,800 mm, overall weight: 8,500 kg, Oilhydraulic gap press, YOP 1990, control SIEMENS, capacity 100 to, return power 10 to, motor 15 KW, throat depth 320 mm, stroke 320 mm, table size 710 x 560 mm, table bore Ø 110 mm, table high 850 mm, rapid feed, hydr. ejector 20 to, hydr. die cushion 10 to, Hydro strip feed device Keller typ HVP-SIG 2 with control, decoil hauling winch SOPREM, weight ca. 8500 kg Dkedpfx Aksz Itdtjmou

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, Equipment: CE marking, The Rhino Drive Master is a compact yet powerful mini-skid-steer attachment designed for quickly and controllably driving posts and pipes into the ground. Work faster and significantly safer than with a manual post driver, sledgehammer, or loading platform. Level the mast, position the machine, and effortlessly drive an entire fence line into the ground. Key Features & Benefits: Powerful & Controlled Performance Long-stroke piston for better energy transfer and reduced recoil. Control valve that reduces hydraulic peak pressure. Djdpfx Aksz Irm Tsmjku Between 700 and 1200 strokes per minute with a striking force of 203 Joules. Flexible Positioning Adjustable mast: 7° away from the operator, 15° towards the operator – ideal for precise alignment. Mounting from either side – ideal when only one side of the terrain is accessible. Compact & Compatible Suitable for most mini-skid-steer models. Quick mounting with the included mounting plate; custom mounting possible upon request. Ideal for use in combination with other mini-skid-steer attachments for efficient site preparation. Versatile in Use Suitable for steel and wooden round, square, and rectangular posts up to ø150mm outer diameter and 3 meters long. Utilizes existing (owned or rented) hydraulically powered skid-steers. Oil pressure: 20 - 30 LPM at 70-140 bar The Drive Master is available for sale with or without a Toro skid-steer loader. The price in the advertisement is without a Toro skid-steer loader.

Condition: used, Year of construction: 2023, pressure 320 t chamfer lenght 6050 mm distance between columns 5100 mm stroke 350 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 22.500 kg dimensions of the machine ca. 7000x2300x3200 mm The machine is in like-new condition Accessories/Features: - ESA S 875 PC control system - 4 height-adjustable support arms in front of the machine - 2 manually adjustable stop fingers - Light barrier in front of the machine - Foot switch - Crowning Dodpfxozvq Eas Akmeku - Side safety doors - Controlled axes: y1, y2, x, R, z1, z2 - 1 set of upper and lower tools - Machine in like-new condition