Used Profielbak Cw 30 for sale (24,855)

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS cabinet series is structured as follows: e.g., Type TSR-30/1000 1) T means: Temperature 2) S means: Stress Screening 3) R means: External Conditioning 4) -30 means: Lower temperature -30 °C 5) 1000 means: 1000 liters test chamber volume Technical performance data: A) TSR-30/1000 base unit without hose connections, i.e., for use as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ±0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation, and without additional equipment. Air volume flow rate approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to an on-site external test chamber Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured with the circuit short-circuited Heating 4.0 K/min Cooling 4.0 K/min in the range of +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation, and without additional equipment, measured with the circuit short-circuited Caution: The on-site external test chamber must be absolutely sealed and appropriately insulated; any penetrations must be optimally sealed on-site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions height 900 mm width 1000 mm depth 1100 mm External dimensions height 1950 mm width 1270 mm depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, hermetically sealed stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door stop on the left, one-hand operation, lockable. Insert grid: stainless steel, support area 970 x 980mm Load per grid max. 35 kg Total load with max. grid capacity 100 kg Test chamber lighting: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Ljdpfx Akozgbntjyjhh We will be happy to answer any further questions you may have by phone.

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Lodpfxozgbmij Akyehh Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Used machine Used Ganner Compact 30 line boring machine Lhedpfswhuh Sjx Akyoh Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: excellent (used), Year of construction: 2017, Ref: 11039 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette AutoCollator Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. Lodjxyxttjpfx Akyshh 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Ljdpfxexyxr Ne Akyehh Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Lhedpfx Aey Avl Iokysh Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: ready for operation (used), Year of construction: 1993, Immediately available ex location: Hydraulic Guillotine Shear Steiner Type HTS 30 113 Year of manufacture: 1993 CNC-controlled digital backgauge 1000 mm Light barriers Cutting length 3200 mm Lhjdpfxszgahfe Akyeh Material thickness up to 13 mm Throat depth 300 mm Stroke 300 mm Drive power 15 kW Weight 15 t Price: EUR 6,500 plus VAT, ex location

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Lsdpfoyx Irljx Akyehh Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Lhjdpfjyxy D Tox Akysh Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm Lsdpfxjt U R H Uj Akyshh bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically

Condition: used, Year of construction: 1991, measuring range X-axis 300 mm measuring range Y-axis 300 mm Table dimensions 800 x 800 mm taper ISO 30 voltage 220 V / 50 Hz total connected load 0,3 kW weight 0,5 t dimensions of the machine ca. 1,5 x 1 x 1,6 m • Tool presetter with taper SK 30, SK 40 is also optionally possible, • Display of measured value ZOLLER DA 6050 / 0266, Lhodpfx Akjtv Icnoyeh serial no: H320/066

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location Ljdjzf N Edjpfx Akyehh - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg Lhsdpfx Aswkpvvskyeh

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamping units Metal table Used exclusively in single-shift operation Lhedpfjul S Eajx Akyjh Includes tools from WILSON TOOL 24626

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2014, Year of construction: 2014, Equipment: ABS, Tipper with pump device 2x aluminum cabinets Pipe holder + pipes 8x container mounts Drip tray Tread plate Good condition Lhedozfyiyspfx Akyeh Input errors, amendments, mistakes, and prior sale excepted. The information given in our advertisements, online, on price tags, and in pictures constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typing or data transmission errors.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, Fermitung possible or SAF or Trex 2 lift axles 1x20 rear flush 2x20 1x30 rear flush 1x40 rear flush 1x45 rear flush Tool box Water tank LED lights KTL dipped ADR Can do anything Rental possible Write to us with your wishes so that we can create an individual offer for you We sell tires and rims for trucks & trailers of the Brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 We finance, rent and lease Ljdpezfykksfx Akyjhh If not in stock, delivery time 7 to 9 weeks We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailers Tarpaulin trailers Silo trailers

Condition: used, axle configuration: 3 axles, first registration: 04/2002, Available in multiple units: 30 units of various makes and models, different years of manufacture. Prices start at €2,100. We have 20-foot containers, 3-axle and 2-axle models. 40-foot containers, different years of manufacture. 3 units with leaf spring suspension. Lhodjzfylbepfx Akyeh Special price for purchasing all units together.

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 08/2027, working width: 300 mm, conveyor belt width: 320 mm, type of input current: three-phase, total width: 590 mm, total length: 680 mm, total height: 1,220 mm, TOP Pretzel Twisting Machine MK-Erka WMA 30 Wrapping band width 320 mm for all types of sticks, such as corn-topped pretzels and lye pretzels, stainless steel construction simple, robust technology! Connection: 400V, 16A-CEE plug Dimensions: 590 x 680 x 1220-1300 mm (W x L x H) Used machine, refurbished with warranty + spare parts service Lhodpsw Tqkxsfx Akyoh Quality from a specialist company! Benefit from over 35 years of experience! Optional: Maintenance contract Feeder E-box for increased safety Service package Delivery service Training & commissioning We offer a wide selection of twisting machines!

Condition: used, axle configuration: 3 axles, first registration: 04/1984, color: other, Year of construction: 1984, Empty weight: 5.960 kg Axle 1: left 10mm right10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10mm right 10mm Lodpfxsyh D R Ss Akyehh We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 02/2000, color: other, Year of construction: 2000, Empty weight: 4.680 kg Axle 1: left 6 mm right 6 mm Axle 2: left 12 mm right 12 mm Lhjdpfx Ajxywpajkyoh Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 04/1998, color: other, Year of construction: 1998, Empty weight: 3.980 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Lhedpfx Akjyw S D Asyoh Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 02/1984, color: other, Year of construction: 1984, Empty weight: 6.080 kg Axle 1: left 6 mm right 6 mm Axle 2: left 10 mm right 10mm Axle 3: left 6 mm right 6 mm Lsdpfx Asxu Dlqskyjhh We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 07/2000, color: other, Year of construction: 2000, Empty weight: 3.940 kg Axle 1: left 6 mm right 6 mm Axle 2: left 5 mm right 5 mm Lhedpfx Akewycwrsyjh Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 3.800 kg Ledpfeu Sq Inox Akyjhh Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2002, Empty weight: 3.900 kg Lodpfxeu Snbrs Akyjhh Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!