Used 2001 Rotox Kf 347 for sale (1,723)

Condition: used, mileage: 118,216 km, power: 90 kW (122.37 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 1,489 kg, maximum load weight: 762 kg, overall weight: 2,251 kg, wheelbase: 2,682 mm, next inspection (TÜV): 02/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 4,408 mm, Year of construction: 2016, construction height: 1,870 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, Special equipment: Audio system Composition Audio (monochrome display, SD card interface, AUX-IN), rear tailgate with glazing, heated rear window, high cargo partition wall with window, lumbar support for front left seat, steel rims 6x16, auxiliary heater Isdsx Nzn Ujpfx Aphsih Additional equipment: Third brake light, passenger airbag, driver airbag, traction control system (ASR), equipment package: BlueMotion Technology, exterior mirror aspherical left, exterior mirror convex right, exterior mirrors, commercial vehicle version, BlueMotion Technology, front floor carpeting, brake assist, front comfort headliner, roof rail/roof rack preparation, electronic differential lock (EDS), driver assistance system: hill start assist, driver assistance system: multi-collision brake, driver assistance system: fatigue detection, laminated tinted windshield, foldable radio remote key (1), interior dust and pollen filter, body type: panel van, radiator grille black with lower chrome strip, 3-spoke steering wheel, mechanically adjustable steering column (height/length adjustable), truck registration, engine 2.0 L – 90 kW TDI, engine drag torque control (MSR), multifunction display Plus, non-smoker package, standard payload, wheelbase 2682 mm, tire repair kit (tire mobility set), low-emission according to Euro 6 emissions standard, windshield wipers with interval function, halogen H4 headlights, right sliding door, SCR system (AdBlue technology), front side airbags with head airbag unit, side protection strips, front seatbelts with pre-tensioners, height adjustable, height adjustable front left seat, front right seat, seat cover/upholstery: fabric, start/stop system, first-aid kit and warning triangle, seatbelt warning system for front seats, heat-insulating green tinted glass. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 273,599 km, power: 294 kW (399.73 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 18,450 kg, maximum load weight: 7,550 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 06/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, compressed air brake, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, * German vehicle * From first owner * Only 273,599 km * Only 4,903 operating hours * Condition, see photos * Loading crane from premium manufacturer Palfinger, type PK 34002-SH E + jib PJ 060 B, foldable at the rear * Complete documentation with inspection reports available * Radio remote control * Rotary servo * 5th & 6th control circuit * Floor control Iisdpfx Apeyn Rl Ejhsh * Crane rotates 360° continuously * Hook height 30 meters * Four hydraulic outriggers + 3 jib * Lifting capacity at: 4.4 m = 6,700 kg - 6.3 m = 4,450 kg - 8.2 m = 3,250 kg - 10.3 m = 2,450 kg - 12.4 m = 1,960 kg - 14.5 m = 1,640 kg - 16.7 m = 1,320 kg - 18.9 m = 920 kg - 20 m = 760 kg - 22 m = 680 kg - 24 m = 620 kg - 25.8 m = 570 kg * Maximum load capacity 10,000 kg * 4 hydraulic outriggers * Pallet forks * Trailer coupling * Trailer load 26,470 kg * Total weight: 44,000 kg * Flatbed body with aluminum loading flaps * High front bulkhead * Securing with stake pockets * Flatbed dimensions: L=6,900 x W=2,480 x H=1,000 mm * Steerable trailing lift axle + raise/lower * Automatic transmission * Air conditioning * Cruise control * Auxiliary heater * Reversing camera * Engine brake * Differential lock * Telephone preparation * Comfort driver's seat, air-suspended * Seat heating * Electric windows * Electrically heated mirrors * Radio-CD * Central locking * Sunroof * Easy Start assistance system * Rotating beacon * Suspension: leaf spring / air * Multifunction steering wheel * Work lights * LED daytime running lights * ABS/ASR/ESP * Lane departure warning system * Emergency brake assist * Storage compartment * Wheelbase: 4.80 m + 1.40 m * GVWR 26,000 kg * Unladen weight 18,450 kg * Payload: 7,550 kg * Various stone clamps available at an extra cost If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend that you inspect and test the goods to avoid any misunderstandings regarding their condition and suitability for the buyer. Inspection and testing are possible at any time by appointment and are highly recommended. All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2020, Overview Ijdpfx Aoy Ttzuophjih This isobaric filling machine was manufactured in 2020 by Rizzolio. The machine is designed for bottle filling and is equipped with a double pre-evacuation system, making it suitable for products such as frizzante. It is currently stored and mounted on wheels for mobile use. No capper is included. The machine can be viewed in person at any time.  Technical data - Capacity: approx. 550 bottles/hour (0.33 L, depending on operator) - Formats: 0.33 L / 0.5 L / 0.75 L (general range approx. 0.3 L – 1.0 L) - Application: Bottle filling - Configuration: Filling system with double pre-evacuation, integrated product pump, 3×6 air pipes - Bottle diameter: approx. 55 – 90 mm - Adjustment: Stepless adjustment of bottle diameter and height

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Iiedpfeyr Nr Ssx Aphjh Technical Specifications Component 1: Isobaric Counter-Pressure Filler - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Condition: used, mileage: 293,019 km, power: 338 kW (459.55 HP), first registration: 06/2020, fuel type: diesel, empty load weight: 12,220 kg, maximum load weight: 13,780 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 50 %, axle configuration: 6x2, wheelbase: 3,600 mm, next inspection (TÜV): 05/2026, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, operating hours: 293,019 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, number of beds: 1, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, trailer coupling, truck registration, Reference number for inquiries: 40954 MAN TGS 26.440 * Year of manufacture: 2020 * ABS (Anti-lock Braking System) * Tow coupling * EBS (Electronic Braking System) * Automatic climate control * Air suspension * Navigation system * Lift axle * Sleeper berth * Cruise control * On-board computer * Differential lock * Local transport > 7.5 t * Trailing steering axle * Sound system * Multilifter (Tele-mechanical skiploader) * Radio remote control * Inspections: Technical/Safety (HU/AU) valid until 05/2026 * Transmission type: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 26,000 kg Iedjyqnu Ajpfx Aphjih * Curb weight: 12,220 kg * Payload: 13,780 kg * Permissible gross vehicle weight: 26,000 kg * Tire condition, 1st axle: 30% -- 30% - Tire size: 315/80 R22.5 * Tire condition, 2nd axle: 60% | 60% -- 60% | 60% - Tire size: 315/80 R22.5 * Tire condition, 3rd axle: 30% -- 30% - Tire size: 315/80 R22.5 * Wheelbase: 3,600 mm * Tire sizes: 315/80 R22.5 * Hiab Multilift Futura 18 * Roof bar with lamps * Beacon lights * We are happy to send you a video and additional photos upon request Disclaimer: Subject to prior sale, modifications, and errors. More photos and videos available on our homepage. Our comprehensive services include: * Purchase/sale/rental of commercial vehicles * Fast, hassle-free financing * Processing of all (export) documents * Ordering of export/customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading/load securing * Technical inspections (TÜV), registration service * Transport/delivery of commercial vehicles Consult our trained specialists—we are happy to advise you.

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) Iijdpfx Aszcu Sljphjh - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Condition: used, Year of construction: 1994, Profile milling cutter for profile edging (aluminum or PVC) max. disc cutter diameter 300mm Iijdpfx Apey Uvflshjh with spray system with pneumatic material clamping with dust extraction port 400 Volt, 80 mm cutting depth, 100 mm spindle length Profile can be adjusted for miter cuts.

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  - Capacity: up to 1,600 cph (33 cl); output up to 650 L/h - Formats: 33 cl standard, 33 cl sleek, 50 cl standard Isdpjyudacsfx Aphoih - Application: Can filling - Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns - Lid format: CDL202 - Can diameter: 50 mm – 85 mm

Condition: new, Year of construction: 2025, Cartridges: 5 cartridge height [inch]: 30 Iiedpfx Apjz R Df Iehsh cartridge type: code 7

Condition: good (used), Year of construction: 2016, machine/vehicle number: 302.11.021.16, functionality: fully functional, operating hours: 573 h, power: 12 kW (16.32 HP), input voltage: 400 V, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 12, For sale is our FORMAT4 profit H200 13.33, manufactured in 2016. The CNC machine was primarily used in our carpentry shop for furniture and interior design and has relatively few operating hours. Equipment includes: * 4-axis CNC * Additional swivel unit * Tool changer * Console table with vacuum clamps Isdpfsz Imtnox Aphoih * Vacuum pump included * Operator station incl. PC and handheld device * Includes tool set * Only 572 operating hours The machine is being sold due to the closure of our carpentry shop for health reasons. It is currently connected and ready for operation and can be inspected and tested by appointment. Location: 48308 Senden Dismantling, loading, and transport are the responsibility of the buyer and will be carried out at their own expense. Price: €37,000.00 net, negotiable / €44,030.00 gross, including 19% VAT. An invoice with VAT will, of course, be issued.

Condition: used, machine/vehicle number: 007906, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/10/A3/WZ Position 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Iedpfxjwucm Ae Apheih Position 3: Panel Return Systems HOMAG-PROFI KFL 350/10/A3/WZ

Condition: like new (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Manufacturer: TTK Model: FG-SYS Iijdpezlixqsfx Aphoh Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Lockable metal enclosure. The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: used, Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): Depending on the following band, please contact us Drive:no motor, both sides Transmission possible, two belts one Motor Scope of delivery: without supports Optionally available: Supports Side guides Iisdpfok Abufex Aphjh Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm belt width (GuB): 600 mm height (BH): 210 mm Iiodjk Abf Ujpfx Aphjh Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): 0,8m/s, frequency converter for an additional charge Drive: SEW gear motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0,75 / S1 Year of construction: 2001 Special feature / Accessories: Lateral guides included on one sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2004, machine/vehicle number: 2161, For sale is a Schüco LKF 2600 machine for processing aluminum and steel profiles, manufactured in 2004. The machine is particularly suitable for the efficient processing of long profile lengths. The 3-sided processing over a processing length of 2,600 mm allows complex milling patterns to be incorporated into door and frame profiles without having to remove the profile from the clamping device. The pneumatic profile clamping system with four adjustable clamping cylinders ensures secure fixation of the profiles during processing. The pneumatic 180° rotation allows the profile to be conveniently positioned for processing the opposite side. A special advantage of the machine is the pneumatic rotation of the clamped profile by 180°. This allows processing on multiple sides to be carried out comfortably and precisely. Isdpfx Apjz Spttoheih Technical data: • 3-sided processing with a processing length of 2600 mm. This allows the operator to mill the milling pattern, e.g., of a 5-point locking mechanism, into a door profile without having to remove the profile from its clamping device. • During processing, the speed of the milling cutter can be adjusted to the profile. • 1 vertical milling spindle • Pneumatic rotation of the profile by 180° • All intermediate angles can be adjusted via a clamping device • Pneumatic profile clamping with 4 adjustable horizontal clamping cylinders • The working head is lowered manually and pneumatically fixed at the working height • Copying templates along the entire length of the machine

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: PUR Corner Rounding Unit: yes Ijdpfx Apoyilxmehsih Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW Iedpfxezvmx As Aphjih - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, Year of construction: 1966, Press force: 200 t Stroke: 600 mm Frame width: 1100 mm Shut height (stroke up): 1100 mm Table area: 1000 x 1000 mm Cushion force in table: 63 t Cushion stroke in table: 250 mm Cushion area in table: 800 x 750 mm Table height above floor: 800 mm Ram area: 1000 x 1000 mm Iisdpfx Ajzyniwsphoh

Condition: good (used), Year of construction: 1999, functionality: fully functional, Table 3.000 x 1.000mm, X 2,700 Y 1,200 Z 1,500mm, Auto index head, Iodpjzzk T Usfx Aphsih

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data - Capacity: - approx. 70 cans/min (500 ml) - approx. 100 cans/min (250 / 330 ml) - Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) - Application: Filling and seaming of cans (beer, soft drinks, RTDs) - Configuration: 10 filling valves / 2 seaming heads - Filling system: Counter-pressure filling - Filling pressure: approx. 0.15 – 0.4 MPa - Filling temperature: approx. 1 – 4 °C - CO₂ management: Pre-purging and undercover gassing, oxygen reduction system - Seaming system: Lid size 202 (200 optional), manual lid feeding - Control system: Siemens S7-1200 PLC with HMI touchscreen - Drive system: Frequency inverter (Danfoss), unified drive - Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa - CO₂ supply: ≥ 0.3 MPa Iiodpfx Ajzbhi Isphjh - Water consumption: approx. 0.2 m³/h - Dimensions: approx. 3,153 × 1,980 × 2,350 mm - Weight: approx. 5,500 kg Scope of Delivery - Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer - Control system | Siemens | S7-1200 | PLC with touchscreen HMI - Drive system | Danfoss | Frequency inverter - Filling valve cores | 1 set - Seaming rollers | 1 set (#1 and #2) - Seaming chuck | 1 unit - Can mouth seals | 10 units - Filling valve seals | 10 sets

Condition: used, mileage: 389,963 km, power: 205 kW (278.72 HP), first registration: 04/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: orange, gearing type: mechanical, emission class: euro3, total length: 7,355 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, crane, Mercedes-Benz 1828 3Skipper + PKG 12001 Crane 4x2 Suspension: Leaf spring Wheelbase: 3.90 m Palfinger Crane Type: PKG 12001 2x Hydraulic extension Isdszhyrgspfx Apheih 2x Mechanical extension 2x Hydraulic outrigger 4th and 5th function MEILLER Length: 4.20 m Width: 2.42 m Height: 0.80 m Equipment: - Engine brake - Tachograph disc - Heated seats - Radio/cassette player - Electric windows - Sunroof - Sun visor - Trailer hitch (air, ABS, and electrical connection) We would also be happy to assist you with financing/leasing options through our partners. All information is provided without guarantee. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. Iisdpfxozizabe Aphsh - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: used, mileage: 160,471 km, power: 96 kW (130.52 HP), first registration: 09/2022, fuel type: diesel, empty load weight: 2,173 kg, maximum load weight: 1,327 kg, overall weight: 3,500 kg, tire size: 235/65 R16C 115R, next inspection (TÜV): 04/2027, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 20,590 mm, total width: 25,470 mm, total height: 59,810 mm, Year of construction: 2022, front tire size: 235/65 R16C 115R, Equipment: ABS, air conditioning, airbag, cruise control, ABS, driver’s airbag, number of seats: 3, ASR, hands-free car kit for mobile phone, tinted glass, tachometer, rear parking assistance, electric windows left and right, 6 gears, manual transmission, air conditioning, Euro 6 engine, multifunction steering wheel, entertainment: radio, cruise control, partition, reversing camera, wooden floor, interior lining, airline tracks on the sides and in the floor, lashing eyes, good condition, timing belt replaced. Iodszgc Nrjpfx Aphsih

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter 239000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 Iijdezwk Idepfx Aphoh 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: excellent (used), Year of construction: 2013, MAN gas tank ADR truck used for carbon dioxide CO2 Ijdpfx Ajyanhzsphjih Truck BDF/ADR MAN year 2013 606.000 km Tara 8705 kg Tank for CO2 Pump Flow-meter Only for export from EU We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail.