Used Aeg Contactor for sale (393)

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Kdsdpfx Akovdcc Rewet Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Kodpjyyy Nxefx Akwedt

Condition: used, Barrenschütz, DC contactor, contactor, DC switch, power contactor, power switch, high-voltage switch ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally open main contacts Design: Open, mounted on a bar Actuator: AC + laminated magnetic circuit + rectifier + shunt resistor Actuator rated voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact rated voltage: 1500 VDC Number of main contacts, normally closed: 0 Number of main contacts, normally open: 3 Number of auxiliary contacts: 1 normally open + 1 normally closed + 1 changeover Auxiliary contact rated current: 6 A - Main contacts with deion chambers for rapid arc quenching Kdsdpfjfipfujx Akwet Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used, but in very good condition.

Condition: used, Year of construction: 1967, Manufacturer : Lodige Model : M50G Year : 1967 Type: ploughshare mixer for powders Total volume: 50 Litres AEG 1.5 KW motor Video available in operation Transmission and sealing: reconditioned Mixing chamber rotation Bin: filling / emptying Kodsx R Dycopfx Akwedt  

Condition: good (used), Year of construction: 1988, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm Kedpswrb Srofx Akwjdt -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 64,000 kg, workpiece weight (max.): 18 kg, 1. Forging hammer HUTA ZIGMUNT type MPM 2000A Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 62.5 ton Anvil weight: 45 ton 2. Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1 250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 2600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg 3. Inductive heatinfg device AEG ELOTHERM 400 kW Kdodpfxjlnllbj Akwjt A numbers of different inductors are available in the set.

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Kjdpfx Aszicl Eekwedt Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Condition: ready for operation (used), AEG 029.049 635, card 029.049 636, revision 5, used, 100% functional. Kdjdoi D Tubepfx Akwet

Condition: like new (used), operating hours: 349 h, functionality: fully functional, input voltage: 400 V, input current: 1,037 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, year of last overhaul: 2026, continuous power: 630 kW (856.56 HP), Equipment: type plate available, Exact model designation: Schneider MX eco 4V630 Output power and output current: 630kW | 1188A ME4C63AAA ° With test certificate! ° Only 349 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included ° 2 additional control cabinets with various components tailored to the inverter included (buying drive without extra components possible) The following additional components are installed (see pictures): ° 2 pcs. RFI 480/600-TN (RFI filters) ° 2 pcs. NH fuse switch disconnectors, size 3 | I = 630A ° 2 pcs. ABB AF580-30 | I = 800A (Power Contactor) ° 2 pcs. ABB AG09083735 (Circuit Breaker) ° SMF 480/1200 | 1200A (Sine Wave Motor Filter) ° 2 pcs. ABB AF750-30 | I = 1050A (Power Contactor) Only 1 unit left in stock! Kdsdpfxsx U Dvrj Akwet This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Year of construction: 1994, condition: ready for operation (used), A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible. Kjdpfxewv Umqe Akwodt

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Kdedpozi Hwfjfx Akwot Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: Kdjdswzl Hxopfx Akwet The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder Kodpjx Swqwsfx Akwjdt MAEGERLE - MGC-L 560 Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, bench drill, pillar drill, column drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel distance: 210 mm -Spindle mount: Drill chuck B16 (1-13 mm) -Protrusion: 180 mm -Speeds: 420 - 2100 rpm continuously variable -Column: Diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380 V Kdodpfxsk Tuwvo Akwjt -Dimensions: 620/235/H800 mm -Weight: 70 kg

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Ksdpfx Aoyath Tjkwsdt Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: excellent (used), Year of construction: 1995, total height: 600 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 200 kg, Seperate coolant and frequency converter Last service & Test Log in 2018 Kedjzcxy Hspfx Akwsdt Run out in 1 uM Spindle speeds:50000Rpm Spindle Taper:50ISO/Bt/Mk Length: 1200mm Width: 800mm Height: 600mm Weight: 200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 87 54 41 57, Grinding wheel diameter: 200 mm Grinding wheel width: 30 mm Kdsdpfxodc Swuo Akwot Grinding wheel bore: 51 mm Grinding wheel speed: 3000 rpm Electrical connection: 380 V, 630 W Space requirement: 600 x 260 x 320 mm Weight (approx.): 23 kg

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm Kodpfjv Ni Uwox Akwodt -Fan wheel: Ø810 x 200 mm -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Kdsdpfx Ajwzmcbskwot Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Our service promise to you: Kedpfx Aoztf A Uskwodt - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor Kodpfxekia S Ts Akwodt -Manufacturer: Moeller, Schütz power contactor -Type: DIL2AM-G -Number: 2x contactors available -Price: per piece -Dimensions: 105/70/H165 mm -Weight: 1.8 kg/piece

Condition: excellent (used), MyRef MY-ZB26-TFD refrigeration unit MyRef MY-ZB26-TFD condensing unit suitable for refrigeration applications Typical applications are Freezer cabinets in supermarkets and minimarkets cold stores Beer cellars Milk cooling systems Standard equipment Copeland Scroll M compressor ZB series with sound insulation hood Oil sump heater Liquid receiver with burst protection Filter dryer Sight glass visible from outside Ball shut-off valves Component-tested combined HP/ND safety pressure switch Electrical equipment: IP 55 switch box, compressor contactor, DIN rail mounting Condenser is integrated and protected in the housing Condenser fins coated with epoxy resin phenol (gold paint*) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; all screws and components can be accessed from the front with minimal effort Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving installation of several units next to each other possible; required mounting distance 25 mm Kdodpevtl T Dofx Akwet Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit Type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Collector volume: 6 liters Air volume: 4500m³/h Cooling capacity: 9 kW Voltage: 400V,3PH,50Hz Power consumption: 8.9 A Dimensions: HxWxD 715 x 1120 x 450 mm Weight: 102 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), AEG Minisemi 380/50 + GK + NCA 029.037 140, used, normal signs of wear, 100% functional. Ksdpfei D Tuxex Akwedt

Condition: ready for operation (used), AEG MS350-0000-000 Permanent Magnet AC Servo Motor, Serial Number: 93-IC-483, mounting hole spacing: 71 x 71 mm, drive shaft diameter: 14 mm, used, shows normal signs of wear, 100% functional. Kdjdpfx Aji D Ey Dokwet

Year of construction: 1997, condition: used, Iseli BS 4 bandsaw blade sharpening machine. Kjdpedrnvtjfx Akwsdt