Used Agie Agie Progress 3 for sale (64,420)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Ndodpfszf E Nxox Agrsb Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, pressure: 6 bar, 3 units Netzsch Nemo progressive cavity pumps. Shaft stainless steel. Housing steel. These refurbished standby machines come from the spare parts warehouse. They were intended for the delivery of calcium hydroxide suspension. Images are in order from left to right: 1. Photos 1-9 Green pump on the left NM 038BY02S12B (new, unused) 2. Photos 10-18 Grey pump in the middle NM 045BY01S08B (refurbished) 3. Photos 19-26 Blue pump on the right NM 038 BY (refurbished) Nsdpfx Agew I Hnijrsdb

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Nodpez Enhzsfx Agredb Spindle diameter: 50 mm Bushing diameter: 70 mm Bushing equipped with spacer rings Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: Njdpfswwrtwjx Agrjdb * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: ready for operation (used), Agie low-power supply LPS-06 A 614.110.5, used, minor signs of wear, 100% functional. Njdpfx Asi D Twhsgrjdb

Condition: new, AGIE ADD-19 / 043644 card + DUB08A / 043694 option card + FPB-20A / 043714 front panel SN:10000101, unused in opened original packaging, 100% functional, delivery as shown in photos. Ndodex Eqqwspfx Agreb

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Njdpfxeza U Nle Agrjdb Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES FORM 2000 HP WIRE EDM MACHINE, MANUFACTURED IN 2012 THERMAL STABILIZATION Nodpfx Agey Txk Ierodb TRAVEL: X 400, Y 300, Z 350 MM EROWA UPC 320 WORKPIECE HOLDER WORK AREA DIMENSIONS: 900 x 630 x 350 MM LINEAR GUIDES AGIEVISION 5 GENERATOR ITS HEAD C-AXIS SUPERFINISH MODULE PREPARED FOR ROBOTIZATION

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM Nsdpfx Agoy Twkasrjdb LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: ready for operation (used), AGIE HPS-06 High Power Supply 613760.8, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Ndjdpfx Agsi D Tv Sorjb

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Njdew Sxx Iepfx Agrjdb

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES Ndsdpfx Agey Twf Rerob AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: ready for operation (used), Agie power output interface POI-04 -B 614.120.4, used, minimal signs of wear, 100% functional. Ndodpfx Agji D Tx Rersb

Condition: ready for operation (used), Agie Low Power Supply LPS-20 B, 617.941.0, used, minimal signs of wear, 100% functional. Ndsdoi D Twpopfx Agrob

Condition: ready for operation (used), Agie MJG 4014 D, conductivity measuring system. 619 782.6, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ndedpfx Agsi D Tw Torsb

Condition: ready for operation (used), Agie Zch. Signal Terminal Blok STB-06 A 621802.8, used, minor signs of wear, 100% functional. Ndsdpfx Agei D Ty Ssrsb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,300 mm, total length: 3,000 mm, total width: 2,100 mm, overall weight: 3,000 kg, table load: 400 kg, Equipment: documentation/manual, The machine is located in a well-maintained company and is in excellent condition, ready for immediate use. If you have any further questions, please contact us. Ndsdjzuxngopfx Agrsb

Condition: good (used), Year of construction: 2001, Agiecut Challenge 3 Year 2001 XYZ - 500x350x256 UV axis - +-70mm Maximum coveted 30° at 100 mm height Nodpfouanm Iox Agrodb Maximum pieces 1050x650x250 Maximum weight 400/800 kg Machine dimensions 2800x2400x2220mm Machine weight 4t500kg

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Nedoz Afhijpfx Agrsdb Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: like new (used), Year of construction: 2019, operating hours: 9,620 h, functionality: fully functional, machine/vehicle number: 7607, feed length X-axis: 550 mm, feed length Y-axis: 340 mm, feed length Z-axis: 355 mm, travel distance X-axis: 415 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, total height: 2,450 mm, total width: 2,250 mm, total length: 2,350 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, distance table to spindle center: 495 mm, space requirement width: 2,500 mm, space requirement length: 2,600 mm, space requirement height: 2,600 mm, warranty duration: 6 months, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, HSC 300/3 - 3-axis TNC640 High-speed milling machine Factory refurbished Ndodpfezzklqjx Agrjb Technical data: Working area X/Y/Z 415x340x355 Workpiece weight max. 500 kg Distance machine table - spindle nose 495 mm Machine dimensions (W x D x H) 2250x2350x2450 mm Machine weight approx. 4000 kg Power connection three-phase 400V/50Hz Equipment Color light/telegraph gray Control Heidenhain TNC640 NC-34059008 SP1HF1 Milling spindle Steptec HVC140 Speed 42000 rpm Tool holder HSK40-E Tool positions 16 Tool measurement with laser Handwheel Renishaw measuring probe OMP400 Minimum quantity lubrication Adjustable air supply Dust extraction L.CUT1 with attachment silencer Services including transport, on-site inspection, training Options on request: Automation with AWEX50/5 50 electrode changing positions 5 pallet changing positions

Condition: ready for operation (used), Agie Zch. MJG4022 A 619782.6, used, shows normal signs of wear, 100% functional. Ndsdei D Ty Ijpfx Agrob

Condition: ready for operation (used), Agie Digital bidirectional expansion module DBE-01, A 625854-5, used, minor signs of wear, 100% functional. Nodji D Tvvepfx Agredb

Condition: ready for operation (used), Agie Digital motor control unit DMC-01 B 626074.9, used, minor signs of wear, 100% functional. Nedpsi D Tvyjfx Agrodb

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Nodpfx Aezf Akyegrodb Large bobbin kit.

Condition: used, Year of construction: 2019, Diesinking / EDM Travel distance X: 900 mm Travel distance Y :700 mm Travel distance Z: 500 mm table size X: 1300 mm table size Y: 900 mm max. workpiece size X: 1814 mm max. workpiece size Y: 1215 mm max. workpiece size Z: 600 mm max. electrode weight: 50 kg max. workpiece weight: 3000 kg tool changer: 20 -time generator: 80 Ampere cooler drop tank control Charmilles Nsdpjzn If Iofx Agrodb