Used Alligator Shear Jmc 320 Recon for sale (5,081)

Condition: new, functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: duplex, power: 9 kW (12.24 HP), battery capacity: 750 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, battery weight: 962 kg, fork length: 1,200 mm, tire condition: 100 %, overall weight: 2,350 kg, empty load weight: 2,350 kg, color: yellow, Equipment: gripper hydraulics, lighting, pallet forks, sideshift, We offer this new Jungheinrich EFG 320 front loader forklift with fork rotator (180 degrees) carriage, year of construction 08.2025 Type: EFG 320 Serial number: FN744944 Rated capacity: 2000 kg System voltage: 48 V Mass of truck without battery: 2350 kg Option: G120-300ZT Year of manufacture: 08.2025 Load center distance: 500 mm Nominal power: 9.0 kW Battery mass min: 962 kg Bljdpfsy A Hhmox Af Reh Battery mass max: 1094 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Item No. 24215 Technical data: - Max. working width 3040 mm - Max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Back stop with positioning control Pos100, 750 mm - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear guard with light curtain Bedpetpnldefx Af Rslh - Electric foot switch - Pneumatic connection 6 bar - Power supply 400 V - Space required without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: used, mileage: 404,000 km, first registration: 04/2018, overall weight: 18,000 kg, axle configuration: 2 axles, emission class: euro6, Equipment: ABS, electronic stability program (ESP), soot filter, tail-lift, Colour white, Euro 6 engine, fixed tail lift (LBW), ABS, ESP, tail lift, particulate filter, air suspension, cruise control, radio Blsdpfx Afexrxplj Rsh

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Bjdjwq Aa Iopfx Af Rjlh Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, TURBO SYSTEMS D252P | Pneumatic portioning machine Manufacturer: TURBO SYSTEMS LTD. Model / Type: D252P Serial number: D252P6409056 Year of manufacture: 2014 Power supply: Pneumatic Overall dimensions: 1400x700x1600mm Blsdpfx Afjzagqhs Rjh The Turbo Systems D252P is a professional pneumatic portioning machine, a high-performance piston dispenser designed for the precise portioning and dosing of a wide range of products in the food industry. The machine is widely used in delicatessen plants, meat processing facilities (dosing pâtés, fillings), confectionery and bakery operations (fillings, creams, sauces), as well as in the ready-meal production and industrial catering sectors. Thanks to its pneumatic drive system, the device guarantees consistent and smooth operation without the risk of overheating components.

Condition: good (used), Year of construction: 1980, Sheet metal shears, tin snips, sheet metal sheet metal shears, crank-operated sheet metal shears, auxiliary sheet metal shears -mechanical guillotine shears -Cutting width: 1130 mm -Max. cutting thickness: 4.0 mm -Features: Back fence, side fence, 3 supports -Drive: 2.2 kW -Protrusion: 115 mm -Installation dimensions: 2620/1685/H1365 mm -Transport dimensions: 1215/1685/H1365 mm Bjdpfsy Tyqvex Af Rjlh -Weight: 1250 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available Bsdpfx Afofgi Nqe Rolh -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.

Condition: used, mileage: 117,728 km, power: 235 kW (319.51 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 13,263 kg, maximum load weight: 7,237 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 5,550 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space volume: 50 m³, loading space length: 7,690 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2023, Equipment: ABS, air conditioning, crane, cruise control, differential lock, navigation system, parking heater, Color: White, Unladen weight: 13,263 kg, Total permissible weight: 20,500 kg, Cargo space (L x W x H): 7,690 mm x 2,500 mm x 2,650 mm, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, Velour Seats, Air suspension, Digital tachograph, Loading crane behind cab, EBS – Electronic Braking System, ESP – Electronic Stability Program, Automatic air conditioning, Adaptive Cruise Control (ACC), Heated seats, LED headlights, Headlight cleaning system, Automatic lights, Headlight height adjustment, GSM preparation Bluetooth, Rain sensor, Power steering, Mechanically adjustable steering column, Anti-theft alarm, Roof hatch, Roof spoiler, Fog lights, Electrically adjustable and heated exterior mirrors, Electric kerb mirror, Wide-angle mirror, Immobiliser, Central locking with remote control, Wind deflector, Refrigerator, Axle load indicator, Hill Hold Control (HHC), LED daytime running lights, Sailing function, Telematics system, Seat air conditioning, SCR, PTO preparation, Figo, Plug-in hybrid, Dhollandia tail lift 2,500 kg, Heiwo bodywork, partition wall, electric range of 90 km. Bledpfx Ajyruxwsf Rsh

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 Bljdpfx Aou Icghsf Rsh angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein Bsdpfxou Icppe Af Rolh down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: Blsdou Icp Aepfx Af Rjh - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Bsdpfx Afsu Icqao Rolh Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3050 mm plate thickness: 8 - 16 mm distance between columns: 4800 mm control for program: CNC back gauge: max. 1000 mm Blsdpfx Afsy A Rnqe Reh cutting angle: 0,5 -3,0 ° down holder: 18 Stück Total power requirement: 30 kW height over floor: 2550 mm weight of the machine ca.: 14 t dimensions of machine: 4,8 x 2,3 x 2,6 m

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz Bljdpsu Icxdefx Af Reh table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm Blodpfx Aovc Amtef Rsh control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: welding current - continuous: 320 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,6 x 0,9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Bedpfsu Nwaxjx Af Rjlh Switching from 2-stroke to 4-stroke Cooling mode AF New components like: -hose package 4.0 meter, water cooled -mass tongs and mass cable 4.0 meters -pressure reducer *

Condition: used, Technical details: Bsdpfewf Iuyex Af Rolh table diameter: 950 mm table height: 300 mm rotation movement: 360 Grad table - tiltable: 50 Grad transport measurements machine: 1,0 x 1,0 x 0,4 m weight of the machine approx.: K.A. kg

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t Blodpfx Afou Ickyj Rsh dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück Bedpfx Aju Icnfjf Rjlh back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: used, Technical details: Bjdpfxsu Icqys Af Relh cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *

Condition: used, Year of construction: 2003, Technical details: Bjdpeu Icl Refx Af Rjlh throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m Bedpfx Afou Icmhe Relh hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine xH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Bljdexcay Hepfx Af Reh Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: used, Technical details: Bsdpfx Afjxu Dx De Relh dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Blodpswp Edajfx Af Roh Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *