Used Amazone Single Grain Saw for sale (14,203)

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Iajdpfx Aozcwitsnwsu

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 7,500 kg, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, filling opening width: 1,450 mm, filling opening length: 2,500 mm, year of last overhaul: 2026, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 2500 mm ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Machine weight: 9000 kg Machine in operation Iaodpfsrrhczox Anwou

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm Iodjzc I Iyjpfx Anwoau capacity 45 degrees: flat: 750 (670) x 510 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AI/086060718, overall weight: 3,450 kg, total length: 5,500 mm, total width: 2,400 mm, total height: 2,400 mm, operating pressure: 6 bar, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 1,400 rpm, Denver Skema Logic from 2018, in good condition, for automatic and manual operations. New wooden bed has been fitted, cleaned and tested. Iajdpfx Anjzcm Uxjwou Front safety photocells can be added on request.

Condition: used, Year of construction: 2004, total length: 10,000 mm, total width: 1,500 mm, total height: 3,500 mm, Colour: Grey Weight: 2.000 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 409081 Iedpfx Aezd Nxzsnwsau - Max. cutting height vertical [mm]: 3000 - Max. cutting width [mm]: 8000 - Max. saw blade diameter [mm]: 300 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 8 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 10000mm x 1500mm x 3500mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Iaedpfx Asy H Dblenwsu Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20355010, functionality: fully functional, cutting height (max.): 135 mm, cutting width (max.): 350 mm, saw blade diameter: 405 mm, spindle speed (max.): 3,800 rpm, table width: 780 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting width: 350 mm Max. saw blade height: 135 mm Min. saw blade diameter: 250 mm Max. saw blade diameter: 405 mm Saw blade bore diameter: 55 mm Min. workpiece length: 650 mm Max. spindle speed: 3,800 rpm Table width: 780 mm Min. feed rate: 7.5 m/min Max. feed rate: 30 m/min Iajdpfx Anszdz Riewsu MACHINE DETAILS Conveyor belt motor power: 1.5 kW Conveyor belt width: 355 mm Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,700 mm Weight: 1,500 kg Shipping packages: 1

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 441.12.292.18, functionality: fully functional, cutting height (max.): 137 mm, saw blade diameter: 400 mm, spindle speed (max.): 4,000 rpm, table width: 1,300 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Iasdpezdz N Esfx Anwsu TECHNICAL DETAILS Max. cutting height: 137 mm Max. saw blade diameter: 400 mm Saw blade arbor diameter: 30 mm Parallel fence travel: 1,300 mm Roller table length: 3,200 mm Table width: 1,300 mm Saw unit tilt: 0 - 45° Spindle speed, pre-cutter: 8,200 rpm Pre-cutter saw blade diameter: 120 mm Max. spindle speed: 4,000 rpm MACHINE DETAILS Main motor power: 5.5 kW Voltage: 400 V Current consumption: 11 A Fuse: 16 A Power: 5.5 kW Dust extraction nozzle diameter: 120 mm Dimensions & Weight Dimensions (L x W x H): 3,250 x 1,000 x 1,100 mm Shipping weight: 650 kg Shipping packages: 1 EQUIPMENT Scoring saw CE marking Controlled axes: Parallel fence, cutting height, swivel, scoring saw height Manually adjustable axes: Parallel fence, cutting height, swivel, scoring saw height

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 5014 BP, functionality: fully functional, cutting height (max.): 1,600 mm, saw blade diameter: 250 mm, empty load weight: 500 kg, cutting depth: 55 mm, No minimum price – guaranteed sale to the highest bidder! Isdpfxjzdzy Rj Anweau TECHNICAL DETAILS Max. cutting height, vertical: 1,600 mm Max. cutting height, horizontal: 1,550 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Arbor hole saw blade diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6.6 A Fuse: 16 A Power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,200 x 2,450 mm Weight: 500 kg Transport packages: 1 EQUIPMENT Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15600600437, cutting height (max.): 130 mm, cutting width (max.): 470 mm, saw blade diameter: 550 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 130 mm Max. cutting width at 90°: 470 mm Max. saw blade diameter: 550 mm Saw blade tiltable up to: 45° MACHINE DETAILS Iaodpfx Anezdzmqswou Main motor power: 5.5 kW Voltage: 400 V Current consumption: 12 A Fuse: 16 A Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,600 x 1,700 mm Weight: 500 kg Transport packages: 1

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 8737, saw blade diameter: 500 mm, cutting width (max.): 300 mm, empty load weight: 1,100 kg, TECHNICAL DETAILS Max. cutting width: 300 mm Min. saw blade diameter: 490 mm Max. saw blade diameter: 500 mm Arbor saw blade diameter: 30 mm Infeed table length: 7,000 mm Outfeed table length: 2,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,000 x 1,800 x 1,700 mm Weight: 1,100 kg Shipping packages: 3 Voltage: 400 V Power consumption: 20 A Iodozdzkijpfx Anweau Fuse: 32 A EQUIPMENT Automatic feed system

Condition: used, Year of construction: 1998, cutting diameter 250 mm Iaodpfjzd Hb Tox Anwju saw band length 3600 mm cutting width 300 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 250 x 300 mm capacity 90 degrees: square 250 x 250 mm cutting speed 20 - 100 m/min total power requirement 2,05 kW weight of the machine ca. 720 kg *Metal Band Saw - Fully Automatic Features: - Manual stop with limit switch - Hydraulic clamping vise - Control panel - Stepless adjustment of band speed

Condition: used, Year of construction: 2007, control type: CNC control, rotational speed (max.): 110 rpm, rotational speed (min.): 20 rpm, total height: 1,600 mm, total length: 1,800 mm, total width: 2,475 mm, overall weight: 1,700 kg, Band saw KASTO - Kasto Twin A2 MACH-ID 9652 Make: KASTO Type: Kasto Twin A2 Control: CompactControl Year: 2007 Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Max. stroke 9999 mm Control panel Iaedpezd Dkrefx Anwou Memory 99 program Bundel clamp device Chip conveyor New price 45.000 Capacity 90°: 260 x 260° Cutting 90°: 260 Feed single stroke:100mm Min. cutting length:6mm Cutting speed Vario:20 - 110 Length: 1800mm Width: 2475mm Height: 1600mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, This listing is for the Pall Allegro 50L Single Use Mixing System. The unit is in full working condition and ready for immediate use This premium single-use mixer features a magnetically driven impeller designed for scalable, low-shear mixing from 2 L to 50 L. It offers an optimized compact footprint perfect for cleanrooms, excellent powder-to-liquid homogenization, and straightforward integration into modern bioprocessing lines. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Ijdpozc Hw Hsfx Anwoau • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Iodpfxszd Srdj Anwjau Equipment, detailed description: see documents.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new * Ijdpezdphvsfx Anwsau

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Iaedpfjzcqmxox Anwou Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm Ijdpfszdu Uzjx Anwjau dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions

Condition: ready for operation (used), Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS and Pedrazzoli MDB 102 Orbital fully automatic circular saw machine with deburring installation Transport dimensions part 1: 520x210x190 cm (LxWxH) Transport dimensions part 2: 600x230x190 cm (LxWxH) Transport dimensions part 3: 385x150x210 cm (LxWxH) For capacity see table Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in accordance with its age in terms of appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS and Pedrazzoli MDB 102 Orbital fully automatic circular saw machine with deburring installation Transport dimensions part 1: 520x210x190 cm (LxWxH) Transport dimensions part 2: 600x230x190 cm (LxWxH) Transport dimensions part 3: 385x150x210 cm (LxWxH) For capacity see table Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS und Pedrazzoli MDB 102 Orbital-Vollautomatik-Kreissägemaschine mit Entgratungsanlage Transport dimensions Teil 1: 520x210x190 cm (LxWxH) Transportmaße Teil 2: 600x230x190 cm (LxWxH) Iaodeurm Upspfx Anweu Transport dimensions for unit 3: 385x150x210 cm (LxWxH). Kapazität siehe Tabelle Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: used, Wegoma table saw machine offered. Iaodpfegmb Agox Anwou Type: TS 250 For more information call us or send an e-mail.

Year of construction: 2024, condition: new, - 50 mm cutting height - 1210 mm cutting width - 12 driven rollers - 10 - 30 m/min variable feed rate - 37 KW Sawing Motor (more is possible) - 2,2 KW Feed Gearbox - 70 mm Sawing spindle - 225 mm Circular Saws Ijdpfsfdzrhjx Anwjau - 4000 Kg weight of the machine

Condition: used, cutting height (max.): 1,200 mm, cutting width (max.): 1,200 mm, cutting length (max.): 6,000 mm, spindle motor power: 5,000 W, fixed bench, pivoting head Iaedpjyzrcmsfx Anwju chain with diagonal vertical movement automatic cutting waste collection mat

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Technical specifications: maximum disc diameter 400 mm spindle diameter 30 mm disc guards 2 pieces Iasdpfx Anozdf U Hswju manual blade extension saw units adjustable at an angle of 45° manual adjustment of the distance between the saw units minimum cutting length at 90° 300 mm maximum cutting length at 90° 3600 mm cutting width 200 mm cutting height at 90 degrees 100 mm pneumatic clamps 2 x 2 pieces control buttons material support 2 pieces main motor 2 x 1.1 kW diameter of the exhaust pipe 2 x 100 mm dimensions length/width/height 4200x1150x1600 mm weight approximately 500 kg Advantages: Italian production tilting saw units Includes: manual and parts list used saw, in very good condition

Condition: excellent (used), 2x V-Class seats, year 2019, single seat VS20 A4479400701 Iasdpfx Anjyk Ulbsweu

Condition: used, Year of construction: 2008, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 152 mm, Circular saw – automatic (used) Manufacturer: KASTO Model: VARIOSPEED C15 Year of manufacture: approx. 2008 Control: CNC control KASTO TECHNICAL DATA Saw blade diameter max. 460 mm Cutting range, round 152 mm Cutting range, square 135 mm Iaedpfxezd A Rqe Anweu Saw blade feed, continuously adjustable from 8 mm/min Saw blade feed, continuously adjustable up to 1000 mm/min Cutting speed 150 m/min Hydraulic clamping device: yes ELECTRICAL CONNECTION DATA Power consumption (total) 28 kW Connection voltage 400 V Mains frequency 50 Hz DIMENSIONS / WEIGHTS Space requirement – left/right – 10600 mm Space requirement – front/rear – 4500 mm Overall height 2340 mm Total weight approx. 3900 kg Very good condition Serviced twice a year by the manufacturer Kasto