Used Avb Machinery Llc Wood Shaving Machine for sale (83,344)

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) Lsdpfx Amozh Ihvotjrp (Prices may vary according to larger exchange rate fluctuations)

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Lodpfx Amezgc T Djtorp Please refer to the attached expert report for details on the condition of the item.

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 Lodpfsw Tfxdsx Amtsrp With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Lrsdpfxoxc Rmqo Amtop Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min Lredpfxoxbh E Us Amtsp tool taper SK 30 table load max. 100 kg Weight ca. 500 kg

Condition: excellent (used), functionality: fully functional, CUTTING , TRIMMING SAW machine for solid wood model MZ PROJECT LC 4000 automatic machine second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. maximum cutting length: mm.4000 Lrjdpfxszdqxce Amtjp motor power: Hp 15 total weight: kg. 3.000 volts: 380/50

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Lrjdpfxszdfhas Amtep Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Ljdpfsyzadrox Amtjrp

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000028110, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 2,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, For sale: Premium vertical CNC machining center. The machine was purchased new; we are the first and only owners, ensuring a clear maintenance and usage history. The machine is in fully operational condition, exceptionally well maintained, and requires no further investment. - Working range x/y/z: 2600-900-60 mm - Working head with BH17 drilling head (10 horizontal and 6 vertical drills) - Speed up to 65 m/min Ljdjy Sfw Eepfx Amterp - BSolid control - Automatic dimension reading via laser

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Software: bSolid. The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno. Lodpfx Amszcrfpetsrp

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Lodpfx Aoy Uydljmtjrp

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min Lrjdpfjv Nracjx Amtop Control Siemens total power requirement 13 kW weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Retrofitted in 2014, Siemens control system.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Ledewyda Ujpfx Amtjrp Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Balestrini linear milling machine Two milling units Milling height max 100mm Milling length max 1500mm Work on copiers Lrsdpfx Amjvt Aynotop Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou Ledpoxa Eu Rsfx Amtorp - Height: approx. 18 m - Clearance height: 4.8 m - Volume: approx. 140 m³ - Shell height: 9 m - Shell diameter: 4.5 m - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Lrsdpfx Amey Iyvnetjp Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Lrodpfx Amey Iwf Hetep Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Ljdpfx Amsy E Snqsterp Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, spindle speed (min.): 18,000 rpm, spindle speed (max.): 2,800 rpm, mount diameter: 300 mm, feed length Y-axis: 1,800 mm, Two-station CNC lathe – Efficiency, precision and productivity in the processing of cylindrical parts The CNC lathe with 2 working units and numerical control is a modern solution for the processing of wooden parts with a cylindrical shape – such as columns, table legs or decorative elements – offering accuracy, repeatability and efficiency in any workshop or factory. Double performance with independent units Equipped with two working units that operate simultaneously or independently, the lathe allows the rapid processing of parts up to 1200 mm. It is ideal for the series production of furniture components, church elements or artistic objects. Solid construction for durability The welded frame made of rectangular profiles, heat-treated, provides stability and torsion resistance. Linear guides on the X, Y and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack and pinion system, guarantee precise positioning and efficient control on all axes. The manually adjustable tailstock with four clamping points stabilizes the parts during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds of up to 18,000 rpm without overheating, ensuring a constant work rate and an extended service life. Intelligent DSP control The DSP control unit with internal memory allows for quick file import, project resumption from the stopping point and real-time parameter adjustment – ideal for a continuous and efficient production flow. Precision and maintenance auxiliary systems Self-centering chucks firmly fix the parts, while optical sensors and an automatic lubrication system ensure precision and low maintenance. Key advantages Perfect repeatability, even for large production runs Ledpfx Amowhbgustsrp Flexibility in operation with independent work units Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality and adaptability in woodworking, making it the ideal choice for modern workshops or furniture factories that aim to optimize production processes. Maximum working length 1200 mm Maximum working diameter (Ø) 300 mm Number of work units 2 pcs Control DSP Workpiece rotation speed 0 – 2800 rpm Motor power 4.5 kW Mill speed 18000 rpm Inverter “BEST” inverter Drive motors Servo motors – Hybrid Maximum feed 50 mm/ s Accuracy 0.0125mm

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 221/2-306, functionality: fully functional, operating hours: 207 h, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, workpiece length (max.): 1,000 mm, number of axes: 3, number of slots in tool magazine: 4, total height: 2,500 mm, total length: 1,500 mm, total width: 2,500 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediately High-performance industrial vertical CNC machining center suitable for milling furniture carcasses and other components from wood and laminated panels. Key Features - Vertical machining with highly accurate vacuum positioning system (including complimentary vacuum pads) - Rear clamping for processing all edges of the workpiece, enabling complete machining without repositioning - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible power supply for computer unit Technical Specifications - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: - Vector: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining Unit - 10.3 kW electrospindle (air-cooled) Ledjy Eygnjpfx Amtjrp - HSK-F63 tool holder - 4-position tool magazine - XL boring unit – 19 drilling spindles (13 vertical, 6 horizontal) - Groove saw in Y-direction Software and Control - Complete CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment - ECO vacuum system (8 m³/h)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1000017221, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, controller model: BSuite3, number of spindles: 17, TECHNICAL DETAILS Working area X-axis: 2,500 mm Working area Y-axis: 900 mm Working area Z-axis: 60 mm Number of axes: 3 Tool: ISO 30 Spindles Total number of spindles: 17 6 vertical in X-axis 5 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis MACHINE DETAILS Numerical control: BSolid Software - BSuite3 EQUIPMENT Automatic unloading device Integrated blade for groove insertion Front protective and safety systems with mats Lodpeyzpcdsfx Amterp Perimetric protective grids External reference: MME002

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Ljdpourulpsfx Amtorp Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 1000058013, functionality: fully functional, operating hours: 1,225 h, Equipment: CE marking, documentation/manual, ENGLISH SPOKEN NOUS PARLONS FRANCAIS Manufacturer: BIESSE Model: BREMA EKO 2.2 Year of construction: 2022 Condition: very good Category ID: 2502 Lrjdpfx Ameyu Nulotjp Type ID: 4257 Type: vertical wood machining center We offer this very good BIESSE BREMA EKO 2.2 vertical wood machining center, year of construction 2022. The machine was sold new in october 2022 together with a Biesse B-solid software for a total price of €120.000 excl. VAT. The machine only has 1225 working hours, it is sold with all the tools seen on the pictures, which make it a bargain ! Please keep in mind we sell the machine in "used" condition. We sell it as a user, therefore no warranty can be offered on the machine. We'll be happy to load it on a truck and even organize the shipment when required. If you have any questions or need more information, feel free to send us a message or give us a call. Notre entreprise de menuiserie vend cette très belle machine Biesse EKO 2.2 qui a peu servi 1225 heures de travail seulement La machine est très bien équipée et sera vendue avec le logiciel B-suite de Biesse, et tout l'outillage qui est présenté sur les photos. C'est une affaire à ne pas rater ! Prix neuf en octobre 2022 : 120.000€ HT La machine est vendue sans garantie car nous ne sommes pas revendeurs de machines-outils, nous sommes une entreprise de menuiserie. Nous pouvons organiser le transport et charger la machine sur un camion.

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle motor power 13.2 kW Spindle Speed 24000 RPM Number of axis 3 Lrjdpfx Amjx Nr Npstep Movement X-Axis Movement 3765 mm Z-Axis Movement 378 mm Y-Axis Movement 1560 mm This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Year of construction: 2009, condition: ready for operation (used), Main Drive Lrsdsx Nr Urjpfx Amtsp Number of axis 3 This 3-axis MORBIDELLI UNIX KBT was manufactured in 2009. It features a CNC control system, a working area of 3000 × 1000 mm, and a maximum panel thickness of 60 mm. Equipped with multiple drilling and milling units, including 24 vertical and 4 horizontal spindles, it also has a fixed saw unit and supports both manual and automatic panel handling. Consider the opportunity to buy this MORBIDELLI UNIX KBT CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining