Used B+N Maschinentechnik Belt Grinding Machine for sale (112,094)

Condition: used, Year of construction: 2008, operating hours: 12,310 h, functionality: fully functional, machine/vehicle number: 50998, grinding length: 1,000 mm, grinding width: 600 mm, total height: 400 mm, total length: 1,200 mm, feed length X-axis: 1,200 mm, workpiece weight (max.): 500 kg, grinding wheel diameter: 400 mm, table length: 1,000 mm, table load: 600 kg, table width: 600 mm, grinding wheel width: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, overall weight: 6,400 kg, table height: 100 mm, grinding spindle motor power: 32 W, rotational speed (max.): 3,200 rpm, rotational speed (min.): 50 rpm, power: 48 kW (65.26 HP), input voltage: 400 V, disc diameter: 400 mm, Equipment: documentation/manual, rotational speed infinitely variable, ELB- Perfekt-Future BD 10 CNC Machine in excellent condition, fully functional, for sale only due to lack of space and overcapacity. Lsdpfx Aex Th S Usgrohl

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted Ledpfx Aouxfu Nogrohl - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: new, width of the strips 150 mm band length 2000 mm revolutions per minute 3000 U/min Lodpfx Agjxaa Swsrohl engine output 4.0 kW weight 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Condition: new, Year of construction: 2026, CORMAK BS150-200 Belt Grinder is an industrial machine designed for intensive operation in manufacturing plants, metalworking workshops, and tool rooms. This metal belt grinder combines high grinding efficiency with an effective dust extraction system, providing safety, cleanliness, and comfort during everyday use. Its robust steel construction and large work table ensure stability and precision even when processing large components. Main advantages of the machine Two belt speeds (15 / 30 m/s) – allows adjustment of the grinding speed to the type of material and the machining process (rough grinding or finishing). Integrated dust extraction system – provides a clean and safe working environment without the need for external extraction units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large work table (480 × 150 mm) – enables comfortable handling of larger workpieces. Stepless grinding angle adjustment – allows precise positioning of the belt according to the processed component. Quick belt replacement system – reduces downtime and improves work efficiency. Design and technology The stationary CORMAK BS150-200 belt grinder is based on a welded steel frame, providing high rigidity and resistance to dynamic loads. The integrated dust extraction system, equipped with a 0.37 kW motor and two Ø100 mm extraction ports, ensures efficient removal of grinding dust and particles. The main 3.0 kW motor provides sufficient power for demanding machining operations and intensive industrial use. Precision and work efficiency Thanks to the use of a 150 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area, reducing processing time and increasing efficiency. Two operating speeds allow quick switching between aggressive material removal and precise surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the entire working cycle, improving grinding stability and abrasive belt life. Applications The CORMAK BS150-200 metal belt grinder is used in: Lsdpfovu Uqnjx Agrjhl manufacturing plants processing steel, stainless steel, and aluminium, welding and metalworking workshops, surface preparation and finishing operations, grinding edges, weld seams, and flat surfaces. Standard equipment Stable steel base with tilt adjustment Abrasive belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection guard Adjustable protective shield Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 15 / 30 m/s Motor speed 1400 / 2800 rpm Main motor power 3.0 kW Dust extraction motor power 0.37 kW Machine dimensions (L × W × H) 1000 × 650 × 1150 mm Weight 117 kg Power supply 400 V Dust extraction ports diameter 2 × Ø100 mm Work table dimensions 480 × 150 mm Chip collection bag diameter Ø320 mm Chip collection bag length 650 mm

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming Ledpfx Ajzq Tz Tegrohl * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min Ledpop H Tvxsfx Agrjhl - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding belt width: 100 mm, grinding belt length: 950 mm, Equipment: CE marking, We are offering here a belt sanding machine from delNegro Elektromaschinen und Apparatebau. This is an AS 90 model with a 100 mm sanding width. Contact us for a quote. Lhodeywarhspfx Agrel

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2082, total width: 1,700 mm, total length: 5,450 mm, total height: 1,900 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,500 kg, type of input current: three-phase, CAPACITY 250 pcs / minute max. BAG WIDTH 80 mm – 800mm max BAG LENGTH 70 mm -1000 mm FILM THICKNESS 0.020 mm- 0.100 mm TOTAL ELECTRIC POWER 13 kW (380 V-50Hz) SERVO MOTOR 4 UNIT FOTOCELL 1 UNIT TOTAL AIR SUPPLY 6 Bar min MACHINE WIDTH 1650 mm MACHINE LENGTH 5450 mm MACHINE HEIGHT 1900 mm WEIGHT 1475 kg STANDARD FEATURES Through touch operator panel; length of the bag, pieces bag, production speed, visible bag pieces in the package, stop feature in the number of written in total counting.  There is one Photocell. Cut are printed and unprinted bags.  It cuts at high speed and with the desired measurement precision through to the servo motor controlled pulling rollers.  Lhsdpfx Aozgaw Hogrol Strong and high quality welding is achieved through to the servo motor controlled welding jaw.  Lsbrszd N Ipj At Dtgsac Through to the servo motor controlled belt system, belts work synchronously to the stacking system.  Through to the servo motor controlled stacking rollers, it provides quality stacking.  Warp rolls with inverter tension control system,  Pneumatic ballerina system,  Automatic edge control system,  Automatically stops when the roll runs out,  When the photocell print location is not correct, it automatically stops.  Roll bobbin binding diameter max 800 mm  Ability to work in PP, OPP, CPP, High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), bags,

Condition: ready for operation (used), G & N Kugelmüller MPS 1 / Cup grinding machine from a university - Spindle speed approx. 3150 rpm - Grinding height above magnet approx. 130 mm - Magnet plate 200x100 mm - Lateral grinding wheel retraction mechanism - Fine feed adjustment - Drive motor 0.6 kW - Machine enclosure - Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.6 meters / Weight approx. 200 kg Errors and omissions excepted. Lhedpfx Agozn Rcperjl

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 055 - 030.0221, Complete overhaul Year 2003 - Fanuc 16i-T Center height 175 mm and distance between centers 650 mm 2 external grinding wheels + B-axis fine adjustment Country of origin: CH Voltage: 3x400V Dimensions: 3680x2165x2100 mm Net machine weight: 5500 kg TECHNICAL SPECIFICATIONS Center height: 175 mm Distance between centers: 650 mm LONGITUDINAL SLIDE (Z) Maximum travel: 800 mm Lsdpfxszbaz Ae Agrohl Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm TRANSVERSE SLIDE (X) Maximum travel: 254 mm / SPW 650 Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum weight of workpiece clamped between centers: 80 kg TAILSTOCK Taper: Morse 3 Sleeve: Ø 50 mm Sleeve travel: 35 mm UNIVERSAL GRINDING WHEEL HEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Grinding wheel head power: 12.5 kW Rotation speed: 3,200 min-1 Programmable cutting speed up to: 50 m/s B-axis travel: -15 to +195° B-axis indexing accuracy: 0.0001 ° LEFT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001 ° RIGHT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Subject to errors and omissions, the technical specifications are provided without commitment. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanical, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings + adjustment. New paint. Workpiece head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of belts. New spindle bearings. New paint. Tailstock Disassembled, inspected, overhauled Hydraulics Disassembly, motor check, replacement of pipes, defective and worn parts. Check the hydraulic block. X-axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of the hydraulic piston, re-grinding of the tables. Z-axis Disassembly, re-grinding of the tables, replacement of worn and defective parts, overhaul of the hydraulic piston, new paint. Electrical cabinet Complete check, replacement of various relays. Paint Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 8398, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 2,500 mm, actuation type: mechanical, total height: 2,200 mm, total length: 3,800 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, Löser external cylindrical grinding machine for grinding the outer circumference of pipes 1.3. Technical data Dimensions: Width approx. 3.8 m | Height approx. 2.2 m | Depth approx. 2.0 m Power supply Electrical connection: 3 x 400 V AC | 50 Hz Total power: 15 kW Fuse: 32 A Pneumatic connection Main supply: 6 bar | approx. 5 m3/h Supply for air nozzles: 6 bar | approx. 30 m3/h Workpieces that can be processed Pipes made of steel or stainless steel with the following dimensions: Length: from 10 mm to 100 mm Diameter: from 50 mm to 1000 mm Grinding station type L Number of grinding stations: 1 Grinding mode: Wet machining Grinding technology: Grinding with a grinding belt and contact wheel | Grinding with a grinding wheel Cutting speed: continuously adjustable | max. 30 m/s Power: 7.5 kW per station Current consumption: maximum 14 amps per station Dimensions of grinding belt: Width 150 mm | Length 2,500 mm Dimensions of contact wheel: Width 150 mm | Diameter 400 mm Lsdpezvn Ursfx Agrjhl Dimensions of grinding wheel: Width 150 mm | Diameter 400 mm Belt tension: Pneumatic | manually adjustable Station positioning: Manual Workpiece transport Workpiece support: V-groove | Angle 120° Height adjustment of V-groove: Manual Feed devices: 1 Positioning of feed device: Manual Feed speed: approx. 1 m/min to 10 m/min; depending on the workpiece diameter Coolant management The machine is prepared for wet machining. A Stevens paper band filter, type PF 120, machine no. 322177, is included in the scope of supply.

Condition: used, Year of construction: 2020, width of the strips 75 mm band length 2000 mm band speed 37 m/min Ledovblayspfx Agrohl total power requirement 3 kW weight of the machine ca. 0,11 t dimensions of the machine ca. 1x0,5x1 m Demonstration unit, rarely used

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 - 34 m/sec total power requirement 4,1 HP weight of the machine ca. 75 Kg dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Industrial floor belt sander with the following advantages: - Danish top quality - Separate emergency stop - Motor brake - Reliable - Simple and Lodpfx Aeirwwlsgrjhl practical operation - Simple adjustment - Easy and quick sanding belt change without tools - 5 year guarantee on the motor - Optimum safety

Condition: new, Year of construction: 2024, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW weight of the machine ca. 0,084 t dimensions of the machine ca. 1x0,5x1 m Lsdpfjvcrnasx Agrshl New device

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, Lhedpfjwqcrqox Agrsl - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding Lhjdpfouxfucex Agrsl - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. Lsdjxnlwzopfx Agrjhl IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: new, Year of construction: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding Ledpfshk Df Djx Agrshl High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Lodezuxt Aepfx Agrshl Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm Ljdpfx Aey Ty Rpogrshl weight of the machine ca. 7,9 t

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg Lodpoxabaiefx Agrehl including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: used, Year of construction: 2006, empty load weight: 12,000 kg, For sale: 3 scissor lifts Working height: 22m Lodpfx Agsz Dukyerehl Price is per unit when purchasing all three Trade-in and transport options available For more information, please call or send a message.

Condition: new, width of the strips 150 mm band length 2000 mm Lhedpfjyv Nb Nex Agrsl band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. Lhodsrkmv Sepfx Agrsl CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Ledoyahv Sjpfx Agrjhl Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.