Used Back Taper Rolls / Back Taper Rolling for sale (13,588)

Condition: new, Fastech 3-Roll Round Bending Machine FRS 2050 x 140 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized lower roll adjustment 2 x digital display Sheet metal width 2050 mm Sheet metal thickness 4.5 mm max. Kedehzq D Hjpfx Akwjnb Sheet metal thickness 4.0 mm for pre-bending Roll length 2050 mm Roll diameter 140 mm Smallest bending diameter 210 mm Weight 1530 kg Dimensions L-W-H 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cord Values apply to St-37 / 240 N/mm² CE marking

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device Ksdpfx Aeyvvrbokwenb - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: refurbished (used), Year of construction: 2000, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 5408, type of input current: AC, input voltage: 230 V, compressed air connection: 8 bar, input frequency: 50 Hz, Self-adhesive labeling machine with shrink capsule applicator 2 label rolls for front and back label collecting table Kjdpfjq Huzlex Akwenb

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1250 mm Sheet metal thickness 3.0 mm max. Sheet metal thickness 2.5 mm for pre-bending Knjdpfx Aohzq Dqjkwsb Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1950 x 900 x 1130 mm Motor: 1.1 kW Equipment: Top and bottom rollers, electrically driven Top roller can be swung out Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: used, functionality: fully functional, Year of construction: 1986, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 260 mm, roller (top) diameter: 270 mm, side roll diameter: 260 mm, sheet thickness (max.): 16 mm, overall weight: 7,500 kg, total length: 4,040 mm, total width: 1,590 mm, total height: 2,095 mm, power: 11 kW (14.96 HP), Equipment: swiveling upper roller, Technical specifications: max. thickness of pre-bent rolled sheet: 16 mm, max. thickness of non-pre-bent rolled sheet: 12 mm, minimum rolling radius: 240 mm, maximum sheet width: 2000 mm. The machine is a three-roll machine – with an upper roll with a diameter of 270 mm and two lower rolls with a diameter of 260 mm, working speed for bending: 7.5 m/min, main motor power: 11 kW, total installed power: 18.1 kW, overall dimensions (L x W x H): 4040 x 1590 x 2095 mm, the weight of the sheet rolling machine is approximately 7,500 kg. The machine is currently disassembled in our warehouse in Přerov, where it can be tested if desired. Knedoz Alf Uopfx Akwsb

Condition: excellent (used), You are bidding on: a branded machine - folding press, from a very reputable and well-known manufacturer - Schröder Machine features: Folding press Schröder AKV Rail bends cleanly – test possible Angle display Bending length just over 2m Sheet thickness: 2 mm (steel sheet); for aluminum, zinc, etc., up to approx. 3 mm Standard rail – optionally also available with segmented rail (see picture)! Optional back gauge Matching guillotine shear available, e.g., Schröder 2m/3mm (see last picture), or Schechtl HT, Ras, etc. Current new price is approx. €20,000 net without accessories Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, back gauge – everything related to sheet metal and steel processing, including folding presses, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories (beading tools, roll formers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available for any questions. You will receive an invoice according to § 25a UStG. Free loading is possible – weight approx. 1550 kg. Knodpfey Hbv Tox Akwob Viewing and testing are possible and encouraged by telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise; we will be happy to advise you. Collection by the buyer (or a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: Folding Press Schröder AKV 260401

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Ksdpfx Aozcfhdekwsnb

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Knsdpfx Akexaqa Sjwob Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Knjdpezkru Eefx Akwsb Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Knedpfszx Nzfsx Akwob Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: new, sheet width 1050 mm plate thickness 3,3 mm Kedjyv Nfbepfx Akwjnb pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. Ksdsyw Rzajpfx Akwonb The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, number of axes: 3, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) Kodpfx Ajyffgrekwjnb • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Kjdpfxszxdhme Akwenb Standard equipment Cardboard pre-stacking belt Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Unit for processing roll spine material Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Unit for processing asymmetric covers and sheets Unit for processing thin boards Optional equipment for viscosity control unit Available in stock

Condition: good (used), Year of construction: 2019, functionality: fully functional, Manufacturer: Grafisk Maskinfabrik A/S, Denmark Model: GM DC330 V8-BX Designation: Converting Line Year of manufacture: 2019 Material width: 333 mm Max. speed: approx. 50 m/min Voltage: 3 x 400 V + N + PE Max. load: 32 A Frequency: 50/60 Hz CE conformity: Yes Location: Germany Availability: End of September 2026 Main configuration: • Unwinding unit, 3" core / 76 mm • Web guiding system • Flexo printing / varnishing unit • Lamination unit • Cold foil application Knsdpezkarrofx Akwob • GEW UV curing unit • Pre-heating unit for toner / reduction of toner cracking • Semi-rotary die-cutting unit with Kocher & Beck GAP function • Approx. 25" magnetic cylinder system, usable format approx. 22" • Matrix rewinding • Back scoring • Slitting unit with shear knives • Two rewinding shafts, 3" • Touchscreen control • Suitable for offline roll-to-roll production Additional equipment: GM Buffer • Condition: Visual condition: 8/10 Technical condition: 8/10 The machine is currently still in operation and can be inspected while running. Based on the available photos and information, the machine appears to be in good, clean, and well-maintained condition. A final technical inspection and test run are recommended before purchase.

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface Knjdpfxoxq A Hlj Akwsb • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Kedpfx Aoy E Nxgskwonb Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue Kodpsf Tdwcsfx Akwenb →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Knjdpfx Akszumvxowob Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Kodpfetk It Sox Akwjnb Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE Knjdpfx Aozk Nitskwob WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button Ksdpfxoyzn Dme Akwjnb • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm Knjdpsyb Sx Tjfx Akwjb gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: good (used), functionality: fully functional, empty load weight: 6,340 kg, maximum load weight: 20,660 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 08/2003, next inspection (TÜV): 03/2026, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 82 m³, suspension: air, tire size: 385/65R22.5, wheelbase: 1,310 mm, ground clearance: 1,150 mm, color: blue, Year of construction: 2003, Equipment: ABS, 2-axle curtain-sided semi-trailer, French style. Inspected March 2025, valid until March 2026. Tyres at 80%. New aluminium doors. New sliding/roll-back roof tarpaulin. Disc brakes. Knodsw Hm Iuopfx Akweb

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Knsdjzb Imajpfx Akweb Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 €8,500, as is