Used Bar Stock Shear for sale (24,335)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 101957.01, Exhibit available immediately: New Kaeser SK 25 - 8 bar screw compressor Controller SIGMA CONTROL 2 Pressure: 8 bar Nominal power: 15 kW Delivery rate: 2.52 m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 320 kg Operating hours: 2.0 Iijdpfxov Ammko An Hjf Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2021, functionality: unexamined, For sale is a high-quality, oil-free RENNER scroll compressor, model SLDK-S 5.5, with an integrated refrigerant dryer and pressure vessel. Technical data: Year of manufacture: 2021 5.5 kW Iodpszrl Dvofx An Heif 627 l/min flow rate 8 bar operating pressure 400 V / 50 Hz / 3 phases Oil-free compressed air generation SCROLLline SuperSilent Integrated refrigerant dryer Pressure vessel The compressor comes from a company acquisition. The unit has not been used since August 2022. Therefore, we cannot make any statement about its current functionality and are selling the unit expressly as untested. Visually, the unit is in very good condition. The original operating manual is available. Inspection is possible by appointment. Sale from company stock. The sale is made with the exclusion of any warranty for defects in materials, to the extent permitted by law. If you have any questions or require further information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a wide range of new and used compressors in stock! Iodpfevr Eicsx An Hoif

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control Iiedpfx Ansu Ickye Hef *

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Iodpfxexx R S Ee An Hjif Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 4 Weights Empty weight: 425 kg Functional Iiedpfsyz Safex An Hef Dimensions of cargo space: 120 x 80 x 60 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 4-10ton Delivery terms: EXW Working pressure: 225 bar Cutting power: 225 kN Required hydraulic flow: 80 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you ACR42H (385kg) Mini concrete crusher/ Betonzangen with hydraulic rotation and double cylinder. ACR42H fits on 4~10ton excavator. New unit with 1 year warranty. Mini crusher from 150kg in stock. Feel free to contact us. Darda, Vergruizer, Betonschaar

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Iisdpfx Aot Exprsn Hsf Assortment of tools is included in the price

Condition: new, Year of construction: 2024, The machine is equipped with 5 workstations: • Punching station • Flat steel shear • Angle steel shear • Notching station • Bar steel shear (round and square) Technical Data Strokes per minute at 20 mm stroke: 37 /min Throat depth: 500 mm Punching force: 550 kN Hole diameter and thickness up to max.: 40×10 mm or 20x20 mm Flat steel up to max.: 300×15 or 200×20 mm Iiodey T N Ukopfx An Hsf Angle steel 90° up to max.: 130x130x13 mm Angle steel 45° up to max.: 70x70x7 mm Bar steel up to max.: 40 mm Square steel up to max.: 40 mm Notching up to max.: 10 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Iedpsxx Sawofx An Hjif Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate Iodpfewcqmasx An Hsif

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 4 h, pressure (max.): 8 bar, RENNER SCROLL SLDK-NEO 3.7 S (8 bar) oil-free, silent compressor with integrated refrigerant dryer with level-controlled steam trap with 250 litre containers with RENNERtronic Touch control Year of construction: 2024 Hours: 4 Bh The compressor is in stock and available immediately Pressure: 8 bar Rated Power: 3.7 kW Flow rate: 410 l/min Sound level: 54 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 1433 x 633 x 1580 mm Isdpfxjvb Ay Ds An Hoif Weight: 280 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 22,000 h, functionality: fully functional, Miyano BX-26S CNC Lathe – Double Spindle with Driven Tools TECHNICAL SPECIFICATIONS: Machining Capacities: - Maximum diameter: Ø 26 mm - Maximum working length: 67 mm (max. 250 mm) - Distance between centers: 330 mm - Bar capacity: Ø 28 mm Spindle System: - Configuration: Twin spindle (L-SP + R-SP) - Variable speed: 80 – 8,000 rpm - Both spindles feature identical specifications Tool System: - 2 linear turret-type tool slides - Slide No.1: 18 tool stations - Slide No.2: 7 tool stations - Total: 25 tool positions - Integrated driven tools - Drilling capacity: Ø 12 mm - Tapping capacity: M8 Performance: - Rapid traverse: 24 m/min (all axes) - Travels X1/Y1: 135/260 mm - Travels X2/Y2: 180/238 mm - Travels Z1/Z2: 70/238 mm Iedpfxsxcp I Hj An Hoif - Maximum push force: 3,325 N KEY FEATURES: ✓ High-precision Japanese Miyano technology ✓ Double spindle for maximum productivity ✓ Ideal for series production ✓ Integrated driven tools for complete machining operations ✓ Perfect for small to medium-sized precision components ✓ Excellent for bar stock machining Ideal applications: Precision components, special fasteners, automotive parts, connectors, electronic components, medical parts. A perfect machine for workshops seeking high productivity and precision in the machining of complex, small-sized components.

Condition: as good as new (ex-display), Year of construction: 2025, KAESER compressed air tank 5000 liters standing, galvanized 11 bar include fittings Year of construction: 2025 High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Iijdpfxsxt Rgfj An Hef Technical specifications: Volume: 5000 liters Overpressure max: 11 bar -Diameter: 1400 mm Container height: 3570 mm Mass: 1050 kg Connection compressed air inlet: 2x DN 100 Connection compressed air outlet: 2x DN 100 Connection safety valve: G 2 " Connection condensate drain: G 1/2 " Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 50 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch Iodpfjv Tzphsx An Hsif The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, functionality: fully functional, Year of construction: 2004, Shear: HACO TS 3006 Working length: 3050 mm Capacity regular steel: 6 mm (400 N/mm²) Back gauge length: 750 mm (motorized) Controller: SP 8 Blade clearance: manual Iiodpoxy Illofx An Hjf Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of sheet supports: 8 × 500 mm, 1 × 1000 mm (left stop + measuring bar) Equipped with sheet support device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at largest angle: 6 Working height: 770 mm Motor power: 7.5 KW Total length: approx. 3880 mm Total height: approx. 1700 mm Total width: 1650 mm Weight: approx. 4500 kg Year of manufacture: 2004 Delivery and installation at your location are of course possible; delivery charges and any additional costs in consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metalworking machines, we offer a complete package for service, maintenance and repairs.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from Bundeswehr stock Iiedezuhfzjpfx An Hjf -Good condition -Good operational condition -Maximum turning height 180mm -Maximum turning length 1000mm -Bar capacity 56 mm -Speed range 56 - 2000 RPM -Automatic longitudinal / facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Three-jaw chuck 250mm -Electric chuck guard -Multifix base and inserts -Coolant system -Chip guard -Machine documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500KG Errors and omissions excepted

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 3 Weights Empty weight: 300 kg Functional Dimensions of cargo space: 120 x 80 x 60 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 2.5-7ton Delivery terms: EXW Working pressure: 200 bar Cutting power: 200 kN Required hydraulic flow: 70 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you ACR30 (280kg) Mini concrete crusher/ Betonzangen with free rotation. ACR30 fits on 2.5~7ton excavator. New unit with 1 year warranty. Mini crusher from 150kg in stock. Feel free to contact us. Darda, Vergruizer, Betonschaar Iijdpfx Ansyz R U Us Hjf

Condition: new, functionality: fully functional, Year of construction: 2026, (Punching) Max. punch diameter x plate thickness: 34 x 26 mm / 55 x 16 mm Stroke length: 80 mm Throat depth: 405 mm Working height: 1070 mm Bar shear Round/Square: 55 / 50 mm Working height: 1250 – 1160 mm Angle shear (90°): 160 x 160 x 16 mm Angle shear (45°): 80 x 8 mm Working height: 1190 mm Flat bar shear: 380 x 25 mm ; 600 x 15 mm Blade length: 610 mm Miter cutting (vagy: Angle cutting): 120 x 12 mm Working height: 905 mm Ijdjzmh Duepfx An Heif Notcher material thickness: 13 mm Width: 60 mm Depth: 100 mm Working height: 940 mm Motor power: 11 kW Punching force (vagy: Pressing force): 115 t Length: 2045 mm Height: 2030 mm Width: 770 mm Working height: 1070 mm Weight: 3150 kgs

Condition: excellent (used), Year of construction: 2019, operating hours: 1,300 h, machine/vehicle number: MA0012_SN938086, RENNER RSK-B 7.5 - 10 bar oil-injected screw compressor with integrated refrigerant dryer The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.02 m³ / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 1031 x 572 x 721 mm Isdpfxed Sw Ncs An Hoif Weight: 225 kg Operating hours: 1300 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: excellent (used), Year of construction: 2024, High-quality INDECO ISS 10/20 hydraulic shears, used exclusively on a single project. The equipment is in excellent condition, practically like new! Ready to work without any additional investment. Technical Specifications: Working Pressure: Max. 400 bar Cylinder Oil Flow: Max. 200 L/min Rotation Pressure: Max. 110 bar Rotation Oil Flow: Max. 20 L/min Weight: 1800 kg Compatible Excavators: Boom weight min. 10 tons, max. 20 tons Manufacturing Year: 2024 Ijdpfx Ajva N D Tjn Hsif

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm Iodpoztc Disfx An Hjif • Shearing of Angles at 90º: 205 x 205 x 18 mm • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm • Stop for punching • Including a wide range of dies and accessories

Year of construction: 2022, operating hours: 575 h, condition: like new (used), Used screwcompressor immediately available (Plug and Play): RENNER RS-PRO 2-15 (13 bar) oil-injected screw compressor Operating hours: 575 h Ijdpfx Ash Rvtron Hoif Pressure: 13 bar Rated power: 15 kW Delivery quantity: 1.92 m³ / min Sound level: 68 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1160 x 747 x 1270 mm Weight: 436 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Iiodpoqzky Esfx An Hjf Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Isdpfsy Tylgsx An Hsif Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: good (used), You are bidding on: a branded machine set – a folding machine from a renowned and well-known manufacturer – Schechtl HA and a guillotine shear RAS by Reinhard Maschinenbau Sindelfingen. Machine details: Folding machine: - Die rail bends cleanly – test possible on site - Angle display - Bending length slightly over 2.5m - Sheet metal capacity: 1.5 mm for steel – also suitable for aluminium, zinc, etc. - Standard die rail - Foot-operated closure - Current new price approx. €20,000 net Guillotine shear RAS: - Electrically operated guillotine shear up to 2mm steel – also suitable for aluminium, etc. - Cutting length: 2.5m - Extension table for special applications included in the price – can be mounted on the left side - Optional spare blades available - Adjustable depth gauge from the front - Many additional onsite tools and auxiliaries available as options - Machines can also be purchased individually Important: Optionally, you will also find a wide range of machines and equipment for sheet metal and steel processing on offer in our shop, including various rails, depth gauges – everything relating to bending and shearing, such as press brakes, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, round rollers for gutter fabrication, back gauges, etc.), as well as hand tools and spare parts from many top manufacturers in stock. Please feel free to contact me for any questions. Ijdpfxeyqytqe An Hsif You will receive an invoice in accordance with § 25a UstG, VAT is included in the invoice amount (margin taxation system). Free loading available – approx. weight: bending machine about 1900 kg, shear about 1600 kg. Inspection and testing are possible and encouraged by prior phone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Folding machine RAS 251009