Used Bear Spr1500 for sale (2,986)

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. Gedpsywgaxefx Afujbu The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 Gbsdpfxewiqq Ss Afusu bolster plate € 2.580,00

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Godpezlbpbjfx Afujbu Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm Bottom (22 kW) - 6000 rpm outboard bearing Gbsdpfxez N Szbs Afuou Right (15 kW) - (6000 rpm) straight jointer Left (15 kW) - (6000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (6000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (6000 rpm), outboard bearing, straight jointer Electronic spindle position adjustment as follows 1. 3rd spindle width adjustment. 2. 4th spindle thickness adjustment. 3. 5th spindle thickness adjustment. Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, type of input current: DC, overall weight: 19 kg, control type: manual, actuation type: manual, fuel type: electric, torque: 5 Nm, cutting height (max.): 305 mm, cable length: 4,000 mm, protection type (IP code): IP55, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, saw band length: 17,101,712 mm, saw band speed: 1,500 mm/s, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, PBS300 TITAN – 300 mm Cutting Capacity The PBS300 TITAN is a professional portable bandsaw designed for processing large structural timber sections up to 300 mm. The machine combines high cutting capacity with a compact and lightweight construction, making it suitable for carpenters, timber frame builders and woodworking companies that require a mobile solution for cutting large wooden elements. Despite its compact size, the PBS300 TITAN provides stable cutting performance in thick structural timber. Well-adjusted machines can cut timber sections up to maximum thickness without noticeable blade drift. The design focuses on rigid blade guidance, efficient manufacturability and practical usability in professional environments. Key Features • Maximum cutting height: 300 mm • Designed for structural timber processing • Hybrid blade guide system (steel guides + bearings) • Precision-machined aluminum band wheels • Compact and portable design – 19 kg machine weight • Robust welded aluminum frame construction • Developed specifically for professional users Typical applications: • timber frame construction • carpentry workshops • log house building • structural timber processing Gbodjv Tcuxopfx Afusu Technical Specifications Cutting height: 300 mm Band wheel diameter: 203 mm Blade length: 1710 mm Blade width: 6–13 mm Guide table size: 420 × 310 mm Motor: asynchronous electric motor Power: 0.75 kW Speed: 1420 RPM Power supply: 230 V (single-phase) Protection class: IP54 Connection cable length: 4 m Machine weight: 19 kg Manufacturer Astra Pro Sp. z o.o. We manufacture machines for other companies as an OEM supplier. The PBS300 TITAN is our own model developed based on years of manufacturing experience in this niche market. More Information If you are interested in the machine, please contact us for technical details, pricing and delivery information.

Condition: used, Spring actuated self-levelling pallet turntable, capacity 2000 kg Spring actuated turntable, which keeps palletised loads at an optimal working height, using a system of calibrated springs and shock absorbers. No power source or compressed air required. Lowers the risk of fatigue and injury. Reduces the time taken for loading and unloading pallets by over 40%. Fitted with fork pockets for easy relocation. Smooth running ball bearing turntable, which eliminates the need to walk around or stretch over the unit. Height 240mm (compressed), 710mm (extended). Turntable dia. 1100mm. Weight: 160kg. CE marked. Gbjdpfx Aozz Ranofuju

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed Gbodpfx Asz Harzjfuju belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, Second-hand Schleicher ‘Perfect’ frame stapler for producing mitre joints in picture, mirror or furniture frames that can bear weight immediately. Gjdpfx Afsz Iluwsuobu Technical data: - Smallest frame: 60 x 60 mm - Drive: Pneumatic

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Gbjdpfxsdx Elmj Afuju Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: ready for operation (used), HFB 6/360.07.637.01 thread SN 8E298 KGT type 50x5x1325 + 2x ball bearings, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Godjqdm Nnepfx Afuebu

Condition: used, mileage: 651,328 km, power: 220 kW (299.12 HP), first registration: 12/2006, fuel type: diesel, next inspection (TÜV): 04/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro4, number of seats: 53, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty or guarantee, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 G 18m (53+101+1+1 emergency seat) (Vehicle 193) Registration Date: 11.12.2006 651,328 km Engine: 11,967 ccm 220 KW / 300 PS Euro 4 Next inspection: 10/2026, TÜV (technical inspection): 04/2027 Permissible total weight: 28,000 kg, unladen weight: 16,490 kg, payload: 11,510 kg Gjdpez H Ediofx Afuobu Overall length: 17,940 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 70/50%, middle approximately 80/80%, rear approximately 40/40%, rear approximately 80/80%, rear approximately 70/80% Double doors at the front, middle, and rear Driver's cab with door Ramp, 2nd double door Fully automatic transmission Microwave Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater Retarder Radio/CD Stop brake LAWO Mobitec ICU 400 53+101+1+1 emergency seat Emergency exit 12-volt socket Chassis with signs of rust 06.02.2024: Upper control arm on the left front axle replaced, including bearing; CR tie rod new; rear axle, left front shock absorber replaced. 07.02.2024: Line from the oil filter to the engine block new; front axle, right brake chamber replaced. 22.10.2024: Hub cover on the left front axle new. 27.03.2024: 3-fan EGR on the left rear new. 22.10.2024: Idler pulley bearing new; coolant expansion tank new; axle guide on the left and right front axle and right rear axle new; axle modulator on the rear axle new; pressure reducer on the rear C-axle new. 21.01.2025: Rear axle, pads + discs new; rear axle, left axle guide new. 25.03.2025: 3rd door valve new. 21.07.2025: C-axle, left and right shock absorbers new; C-axle, left air tank new; 4-circuit protection valve new. Various signs of wear and tear, commensurate with age. Last inspection: 03.11.2025 at 643,658 km, next inspection due at 703,658 km. Price: 4,500.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, Year of construction: 1998, turning diameter 385 mm max. turning diameter 620 mm turning length 958 mm Godpsz Icuusfx Afujbu control MSD 501 II Mori Seiki greates pass round over bed 710 mm Swing dia. over traverse guideway 738 mm centre distance 1.125 mm turning speed range - main spindle 10 - 1.600 min/-1 power capacity - main spindel 30 / 22 kW spindle bearing diameter 180 mm spindle bore 130 mm spindle nose JIS A2-11 x-axis 345 (310+35) mm z-axis 995 mm number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 60 mm turret change time 0,4 sec. tailstock adjustment 850 mm dia. of quill 110 mm taper of center MK 5 quill stroke 150 mm rapid traverse X: 20 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 64 kVA weight of the machine ca. 11,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Lathe MORI SEIKI - SL 400 B / 800 - 11x Turning tool holders

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock Godpfx Aod Iin Tsfuobu • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW Gedpsd Iip Nsfx Afuobu weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! Double miter metal band saw with: - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, weight max. in kg 2000 kg Gjdpfx Afefgyhpjuebu fork length 1800 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm number of wheels 4 vorne, 2hinten tire equipment PU/PU fork arm (length x width x thickness) 1800 x 155 x 50 mm weight of the machine ca. 0,088 t dimensions 2,15 x 0,54 x 1,20 m SPECIAL PRICE !!! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load

Condition: new, weight max. in kg 2500 kg fork length 950 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm number of wheels 2 vorne, 2 hinten tire equipment PU/Pu fork arm (length x width x thickness) 950 x 155 x 50 mm weight of the machine ca. 0,059 t Gbedpsfgyhrjfx Afueu dimensions 1,3 x 0,54 x 1,21 m SPECIAL PRICE !!! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and Milling Center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of Construction: 2000 / Refurbishment cost: 200,000 Euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical Data: See attached PDF Max. turning diameter: 570 mm Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Distance between centers: 1,828 mm Main spindle: Speed range: 35 - 3500 min-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Tailstock: Tailstock spindle speeds: 50 - 3500 min-1 Tailstock power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2 - 6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm C-axis: 0.001° Milling spindle: Spindle speeds: 8000 min-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min Max. feed rate: 30,000 mm/min / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, Steady rest: Gsdpfezxg Susx Afujbu 30 Tailstock: Not required 31 Tool magazine capacity: 42 32 Chip conveyor: Available 33 Chip conveyor type: Slatted belt 34 Chip container: Available 35 Cooling system: Standard (635 W / 1040 W) 36 Coolant supply through the tool spindle: Available 37 Compressed air cleaning of chuck (spindle 1): Available 38 Compressed air cleaning of chuck (spindle 2): Available 39 Tool presetter (in the machine, spindle 1): Automatic 40 Bar loader: Interface only 41 Measuring system X-axis: Heidenhain 42 Signal light: 3-stage signal tower (red, milky white, green) 43 Foot switch for chuck: Double foot switch 44 Steady rest: Automatically centering steady rest (programmable) 45 Type of automatically centering steady rest: SLU3 (SMW) 46 Steady rest unit (SMW): Available 47 Automatic door: Available 48 Hydraulic fluid (fluorocarbon): Not compatible 49 Number of total counters: 1 50 Number of workpiece counters: 1 51 Automatic shutdown: Available 52 Language of NC screen: Spanish 53 Language of PC screen: Spanish 54 Language of warning screen: Spanish 55 Memory capacity for part program (m): 1160 m 56 Number of stored programs: 125 57 Number of tool correction pairs: 240 58 Optional sentence masking: Softkey version 59 Programmable data input: Available 60 Number of shared variables for user macros: 600 61 Tool life monitoring: B 62 Number of tool life monitoring (MORI): MAX. 128 PAIRS * 4 63 LOAD MONITORING: B

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. Gsdpfxjz Hyyfo Afujbu A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Gbjdpfxsfc T Ufs Afuju Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Holp MultiGrip Bucket / MG.060.060 / MS03 / 600 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,940.00 net / €4,688.60 gross - Excavator up to: 6 tons - Own weight approx.: 185 kg Gbedpfxsyl Hfie Afusu - SAE capacity: 150 liters - Cutting width: 600 mm - Maximum opening: 1,010 mm - The bucket is made entirely of HARDOX. - The MultiGrip combines the two attachments, a deep bucket and a grapple, into a single tool. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grapple swivel lines are required for operation - Robust bearing in the side wall - Safe gripping and transport - Stable shafts connect the two fingers (forming a 3-point grip for small parts) - Significantly lighter than a grapple - During excavation work, up to 30% more soil can be loaded into the bucket - Minimization of damage from falling material The MultiGrip is suitable for all excavation and gripping operations; it is ideal for moving stones, filling soil, and gripping wood and brush, and is significantly faster than a grapple. It can grip and sort all types of materials, even soil or grass. Due to its unique shape, the MultiGrip bucket has optimal penetration and handles bulky material well. We have many other Holp products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale are subject to change! = More information = New: Yes Intended use: Construction Unladen weight: 185 kg Please contact Marius Herden for more information.

Condition: excellent (used), Roller conveyors for the furniture industry, WTT Fördertechnik GmbH, Type 121 Price for: 1 unit = 75 EUR (total length 3m) For larger quantities, price on request. Detailed description: Roller conveyor length L = 3000 mm Gsdowwmitspfx Afuobu Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm, adjustable by +/- 25 mm Number of feet FA = 1 unit per running meter Consists of: - 2 units of side rails (side profiles), each 3000 mm long, made of profile 20/80/40/3 mm, with a grid spacing of 25 mm, holes suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. Weight per side rail: 8.15 kg - 15 units of insertable load rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel-finished. Installation length IL = 500 mm Weight per roller: 2.4 kg - 3 units of screw-on bridge support feet in a stable welded construction made of special profile with cross brace, height adjustable by +/- 25 mm via threaded spindle M16 with screw slot. With floor mounting plates and dowel hole. Powder-coated in RAL 3000 red. Weight per foot: 2.5 kg. (Subject to changes and errors in the technical data and prior sale)

Condition: new, weight max. in kg 2500 kg fork length 1150 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm number of wheels 4 vorne, 2hinten tire equipment PU/Pu fork arm (length x width x thickness) 1150 x 155 x 50 mm weight of the machine ca. 0,068 t dimensions 1,5 x 0,54 x 1,21 m SPECIAL PRICE!!! Gbsdpohqiglofx Afueu - Hydraulics with quick lift function up to approx. 200 kg - controlled lowering of heavy loads - Low-maintenance steel hydraulic unit - Rounded fork tips for more safety when entering the pallet - Hard chrome-plated piston rod and overload valve - Swivel and load rollers with ball bearings, for easy running even under load

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Gjdpfjupxh Njx Afuebu Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 18 - 110 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable Gjdpfonq Sanox Afuobu - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: used, Year of construction: 2008, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW Gsdpfx Afjyt R Iqeuobu weight of the machine ca. 0,27 t dimensions 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood