Used Blanchard D20 for sale (236)

Condition: ready for operation (used), Siemens Sinumerik 6FC5312-0DA00-0AA1 control panel front, serial number: T-XD2021378, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Ncedpox Dxn Eofx Abzsw

Condition: new, Siemens 6FC5210-0DA00-1AA1 operating unit SN T-MD2011590, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Njdpfsy Nr E Djx Abzocw

Condition: ready for operation (used), Tyco V23401-T2654-D209 resolver SN: 03116595, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ncedpfjy Ntb Tox Abzjw

Condition: ready for operation (used), Tyco V23401-T2014-D209 resolver, serial number: 07806333 B, used, in good condition, 100% functional, delivery as per photos. Nedpox Dwg Hsfx Abzjcw

Condition: new, Siemens 6SN1125-1AA00-0CA0 LT module, S T-ND2027976, Version A, unused, 100% functional Njdsxahgispfx Abzocw

Condition: ready for operation (used), Siemens 7ND2022-5GB46-1AA6-Z Compensograph PM, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ncodpoxahi Dsfx Abzjw

Condition: ready for operation (used), Yaskawa Electric USAFED-20F B2 AC servo motor SN: S06941-4, used, in good condition, 100% functional, delivery as shown in photos. Nedpfjx Dwlpex Abzjcw

Condition: used, Year of construction: 2018, operating hours: 736 h, load capacity: 1,000 kg, lifting height: 3,300 mm, free lift: 100 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Mast type: Duplex Front tires type: Polyurethane Rear tires type: Polyurethane Battery Volt: 24V Battery Ah: 225Ah Battery with water filling system Nsdpfxeukrnfe Abzecw

Condition: ready for operation (used), Year of construction: 2007, load capacity: 360 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR360 L240-2 Payload: 240 kg Reach in mm : 2400 mm Condition: Used & Tested Year: 2007 Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. Nodpow H A Hmsfx Abzecw (Source: Kuka's Website)

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Ncsdpfx Abszc Dyxozew Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,076 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20V COMBINED was manufactured in 2014. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. With a robust design and a weight of 2500 kg, this machine is ideal for precision turning applications. If you are looking to get high-quality Swiss type turning capabilities, consider the Hanwha XD20V COMBINED machine we have for sale. Contact us for further details. HANWHA XD20V • 4 Machines Available • Maximum Working Diameter: Ø20 mm • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operating Air Pressure: 4~6 kg/cm² (3.9~5.9 bar)Machine 1 • Machining Hours (TEMPS USIN.): 43,977 hMachine 2 • Machining Hours (TEMPS USIN.): 42,043 hMachine 3 • Machining Hours (TEMPS USIN.): 34,212 hMachine 4 • Machining Hours (TEMPS USIN.): 22,076 h IEMCA ELITE 220 R 32 LL (Bar Feeders) not included, optional • Manufacturer: IEMCA • Model: ELITE 220 R • Type: 32 LL • Bar Capacity: Ø32 mm • Air Pressure: 6 bar • Voltage: 200 V • Phase: 3~ • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kABar Feeder 1 • Year: 2013 • Weight: 630 kgBar Feeder 2 Ncedezcxgaopfx Abzsw • Year: 2014 • Weight: 660 kg Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, operating hours: 37,745 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20 COMBINED was manufactured in 2013. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. The machine operates at a rated voltage of 220–240 / 380–415 VAC and has a weight of 2,500 kg. If you are looking to get high-quality turning capabilities, consider the Hanwha XD20 COMBINED swiss type turning machine we have for sale. Contact us for further details. HANWHA XD20 2 Units Available • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Machining Hours (TEMPS USIN.): 37,745 h 24 m 26 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2014 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 660 kg HANWHA XD20H • Rated Voltage: 3 Phases, 220–240 / 380–415 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Max Rotation Speed: 10,000 rpm • Axis Control: 5 Axis • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Max Working Diameter: Ø20 mm • Dimensions (L × W × H): 2258 × 1304 × 1758 mm • Weight: 3300 kg • Machining Hours (TEMPS USIN.): 43,977 h 52 m 57 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2013 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz Nsdezcxagspfx Abzocw • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 630 kg Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Nedpjy U Hriefx Abzscw

Condition: used, Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Ncodpoyg Axujfx Abzow Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Ncodetq T Tkjpfx Abzow Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250

Condition: used, mileage: 164,000 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, parking heater, soot filter, Tigis with a new engine 7-speed automatic transmission 0 km on the engine Navigation system (Comand) / Rearview camera / Wheelchair lift attachment / Absolutely like new condition!!! The vehicle will be available in April. Almost no signs of wear and tear // like new. The vehicle had minor damage to the front, which was repaired according to the manufacturer's specifications (we are a Mercedes Benz VAN partner). Only the hood, bumper, brackets, and one headlight and radiator have been replaced. A Mercedes Benz or DEKRA inspection report can be provided upon request. The vehicle is sold with a 12-month warranty. The car is like new!!!!! If you have any questions: Our service – for you! * DEKRA or TÜV seal available upon request * FINANCIAL SERVICES – Financing, leasing, or hire purchase can be tailored to your individual needs * WARRANTY – up to 36 months available for an extra charge * Replacement vehicles in stock * RECONDITIONING – All vehicles are professionally prepared by our team before and after sale * You can find more vehicle offers and service options at: We look forward to your call / The G&G team is always available to assist you. Nedpfx Askktwvjbzscw We speak Italian, English, Polish, and Spanish and can certainly help you if you are looking for a good used ambulance. This advertisement is only a preview of our vehicle and is not part of a purchase contract. Information provided on the internet is a non-binding description and does not constitute guaranteed features. The seller is not liable for errors, input errors, and data transmission errors. Changes and prior sale are reserved!

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, empty load weight: 3,490 kg, driver cabin: other, Vehicle location: Bovenden. Type: 2.0-ton forklift, model FD20, lifting height 3300mm, load capacity 2000kg. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale and errors! Njdpfx Aboi Rndaozscw

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 940 kg, total width: 1,200 mm, total length: 1,175 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Lift kneader ++++ TOP model Diosna lift kneader ++++ Dough machine with simple, robust technology for a maximum of 200 kg of dough Stainless steel bowl and kneading arm 2 bowl carriages, 2 speeds Connection 400V, 32A-CEE plug Used machine, refurbished with warranty + service Option: Nodeu A Hhrjpfx Abzscw Delivery service Leasing & rental service Maintenance contract Service package Delivery with floor anchoring Instruction and commissioning We have a large selection of lift kneaders in stock!

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Location: Nodpfewd U U Dex Abzscw

Condition: used, operating hours: 9,600 h, load capacity: 12,000 kg, fuel type: diesel, Due to the large number of unserious emails / Emails will not be answered WhatsApp Ncjdpfx Abexz Uvgozew Perkins engine 7 x new tires "SUBJECT TO ERRORS, TYPOGRAPHICAL ERRORS, AND PRIOR SALE"

Condition: excellent (used), Year of construction: 2018, operating hours: 2,006 h, functionality: fully functional, working width: 1,045 mm, area performance: 16,550 m²/h, overall weight: 2,635 kg, warranty duration: 12 months, tank capacity: 180 l, water tank capacity: 300 l, noise level: 92 dB, We offer a ride-on scrubber dryer Karcher B 300 R I D for sale. Catalogue number: 1.480-235.2 Year of manufacture: 2018 Operating hours: 2,006 h Nsdew A Aw Dspfx Abzecw The machine is in very good condition—both visually and technically. It has undergone a comprehensive and detailed overhaul, making it fully operational and ready for immediate use. Every machine we offer is presented using actual photos—you buy exactly the machine shown in the pictures. All equipment purchased from us comes with a 12-month WARRANTY. Technical specifications: Drive type: Diesel Traction drive: Traction motor Working width (brushes) (mm): 1,045 Working width / suction (mm): 1,440 Water tank: clean/dirty (l): 300 / 300 Debris tank (l): 180 Theoretical area performance (m²/h): 16,550 Practical area performance (m²/h): 12,400 Battery supply (V/Ah): 12 / 80 Gradeability (%): 12 Brush speed (rpm): 460 - 460 Brush pressure (kg): 25 - 150 Water consumption (l/min): max. 12 Sound pressure level (dB(A)): 92 Permissible total weight (kg): 2,635 Dimensions (L x W x H) (mm): 2,490 x 1,570 x 1,860

Condition: new, Year of construction: 2023, operating hours: 10 h, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Ncjdpjtw Uzvefx Abzsw Stroke Z1 [mm]: 50mm /160mm Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven ER16 modular drilling/milling spindles - Power: [kW]: 1.1 (S6000) - Front drilling unit for 5 drilling quills diameter 25 mm Cross slide counter spindle - Quantity: 2 driven drilling/milling spindles ER16 modular - Power: [kW]: 1.0 (S6000) Back machining 6 driven tools axial ER16 2 driven tools radial ER16 3 turning tool holders 12x12 XD20III 1.0 kW (Fanuc) 1.02 kW (Siemens) TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc 0i-TF Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder Interface for JBS ACCESSORIES / INCLUDED Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (maintenance and operating instructions incl. parameter list and test log)

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: WFB2500x2400, conveyor belt length: 4,900 mm, conveyor belt width: 290 mm, conveyor belt speed: 400 mm/s, total length: 4,200 mm, total width: 540 mm, total height: 2,000 mm, overall weight: 250 kg, discharge height: 2,000 mm, power: 0.55 kW (0.75 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: GEMOTEG, Equipment: type plate available, Complete solution for conveying bulk material such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt incl. substructure Horizontal area 2,500mm Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz Protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Shaft edge: 50x35mm 25 pcs. T-40 cleats - 396mm pitch Ncsdpfx Asrwi D Ejbzsw 2-ply especially transversely stable Useful width: 290mm, results as follows: Queranordnung 70+35+290+35+70mm ONLY WHILE STOCKS LAST!!! All our prices are net prices plus VAT. - can also be viewed under power after consultation!

Condition: new, Year of construction: 2026, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT Njdpfxezbmx Uj Abzecw Self pickup

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, suction capacity: 1,200 m³/h, total height: 2,970 mm, total length: 930 mm, total width: 930 mm, overall weight: 250 kg, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Nsdpfx Ajv S E Ncjbzocw