Used Boring Tool for sale (43,939)

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg Predpoz Nkutefx Ai Toc as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Psdpoz Irfvjfx Ai Tjrc Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: excellent (used), functionality: fully functional, Offer: Like-new turning tool holders VDI40 turning tool holder Tool holders, VDI40 tool holders. The holders have been inspected and are in very good, almost new condition. The outstanding quality of well-known manufacturers confirms the high repeatability and a very long service life. ----- Order number: 435_C1 → In stock: 2 pieces; Price: €56.00/piece Order number: 430_C2 → In stock: 3 pieces; Price: €56.00/piece One tool holder has been ground on the underside (see picture), but this does not affect its functionality. Pedpsz Hn Rrjfx Ai Terc Order number: 432_B4 → In stock: 2 pieces; Price: €56.00/piece Order number: 433_B4 → In stock: 2 pieces; Price: €56.00/piece For orders of 4 pieces or more, the above prices apply, including shipping costs within Germany. ----- B3 with right-hand rotation; B4 with left-hand rotation C1 with right-hand rotation; C2 with left-hand rotation ----- Short, reversed VDI radial tool holder. Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Shipping costs: upon request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 L2 = 22 l-4 = ----- More VDI40 holders can be found in our other offers, e.g., VDI40 form E2. For boring tools with cylindrical shanks, with internal and external coolant supply. Surface hardened, blued, and ground.

Condition: used, total height: 1,800 mm, total length: 12,000 mm, total width: 2,400 mm, Colour: Green Empty weight: 12.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Model Planer: Movable table - Power [kW]: 12.0 - Number of axes [pcs.]: 4 - Rotary table: Yes - Tailstock center: Yes - Spindle diameter [mm]: 110 - Table length [mm]: 1000 - Table width [mm: 1120 - X-axis travel [mm]: 2400 - Y-axis travel [mm]: 2000 - Z-axis travel [mm]: 1800 - Tool holder: MK6 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 1800 - Max. workpiece weight [kg]: 4000 - Options: Boring head, Boring plate, Digital readout - Transport dimensions: 12000mm x 2400mm x 1800mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 5 Prjdpfx Aez Hph Eoi Tec Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, 2011 Sealpac A6 tray sealer with triple mould – used, in good working condition This Sealpac A6 is a tray sealer built in 2011 by Sealpac GmbH in Oldenburg, a German manufacturer known for its packaging machinery for the food industry. The machine is fitted with a triple mould of approximately 185 x 280 mm and a walking beam infeed, which moves trays step by step and stably towards the sealing stations. According to the manufacturer, the A6 reaches a capacity of up to 90 packs per minute, depending on tray type and application. The construction is in stainless steel and the machine is in good working condition. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Tray sealer Mould: 3 tray tooling, approx. 185 x 280 mm Infeed: Walking beam Pjdpfoz Hqy Aox Ai Torc Capacity: Up to 90 packs/min (depending on tray and application) Material: Stainless steel Condition: Used, good working condition Origin: Sealpac GmbH, Oldenburg (Germany)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Prodpfszxwz Tjx Ai Tsc Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Condition: good (used), Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -Elysier grinding: possible with the machine -Speed: 1500 rpm -Grinding wheel: Diamond grinding wheel -1x angle tables: 220 x 310 mm -Angle adjustment: 15° to -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Grinding dust extraction -max. steel cross-section: mm Podpfx Aijdz U Tls Torc -Number: 1x grinding machine available -Price: per piece -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Condition: used, Year of construction: 1978, x-travel 100 mm y-travel 200 mm z-travel 450 mm taper ISO SK 40 Pedpfsz Rqpaex Ai Tsrc turning speeds 22 - 1400 U/min total power requirement 7,5 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 1,8 x 2 x 1.85 m 3-axis digital readout - Rapid traverse - Documentation

Condition: ready for operation (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 4,500 mm, SKODA WD 160 A BORING MACHINE Prsdpfx Aozb H N Toi Toc Spindle diameter: 160 mm X-axis travel: 7,000 mm Y-axis travel: 4,500 mm Z-axis travel: 1,200 mm B-axis travel (table): 360° W-axis travel (ram): 1,250 mm Rotary table: 2,000 x 2,000 mm - Maximum weight: 20 t - Longitudinal travel: 1,250 mm CNC: Fagor 8055 Electronic handwheel Spindle speed: 275 - 2,570 RPM Tool: ISO 50 2 x 90° square Universal and 90° head

Condition: used, Technical details: Number of drawer: 6 Stück tool holder: 36 Stück Dimensions (HxWxD): 930x710x650 mm weight: ca. 20 kg The trolley is for tool holders SK40 or/and SK50 Podpfx Aeu Nkylei Tjrc on sale without tools or taper *

Condition: used, Technical details: Number of drawer: 2 taper: SK40 weight: 362 kg dimensions L x W x H: 0,42 x 0,69 x 0,51 m Very well maintained tool trolley made of pipe construction, screwed with tools (comparable with the pictures) Prsdpju Nkzpofx Ai Tjc *

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min Prjdpfxju Utwbo Ai Tjc feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Predpexwl Tbjfx Ai Tjc Weight approximately 200,000 kg.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) Podpfsz Sqq Tox Ai Tjrc • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: ready for operation (used), Year of construction: 1999, • Year 1999 • In our possession since 08/2024 • Quinto 4 software Prjdpfozcvaqex Ai Tjc • Electrostatic filter, Elbaron model • Numerous spindles • Recent maintenance performed: external cleaning and repainting, spindle overhaul, spindle belt replacement, brush and front plexiglass replacement, wheel and door rail replacement, machine measurement, offset adjustment, ball reference setting, backlash check, replacement of the air filtration and lubrication adjustment unit, replacement of 4 electric fans.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 1,650 kg, Table: 800 x 400 mm Longitudinal travel (X): 600 mm Prjdpsz Sqk Tofx Ai Tjc Transverse travel (Y): 400 mm Vertical travel (Z): 400 mm Maximum spindle speed: 3,150 rpm Feed rate: infinitely variable Display: HEIDENHAIN Workpiece clamping: hydraulic Very good condition – hardly used!

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 5,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, table length: 1,500 mm, table width: 1,500 mm, feed length W-axis: 900 mm, workpiece weight (max.): 5,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Solid design Also available in CNC version RET100B and the overhauled machine W100A-R Psdpfefk I Nisx Ai Torc MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Spindle speed range 1120 rpm Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 350 mm z-travel 400 mm table surface area 820 x 420 mm Maximum weight on the table 300 kg milling head -swivable +/- 90 ° Pedpfx Aiez St Nro Tjrc Speed range - 2 levels 0 - 4.500 U/min feed speeds 0 - 2.000 mm/min rapid traverse 5.000 m/min total power requirement 7 kW weight of the machine ca. 1,65 t dimensions of the machine ca. 2,25 x 1,9 x 2 m

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. - Hydraulic cutter. - Spreader. Podez Skxxepfx Ai Torc - Hydraulic pump.

Condition: excellent (used), For sale: a set of Hurst hydraulic rescue tools. - Hydraulic cutters. - Spreader. Prodpfxoz Sky As Ai Toc - Hydraulic pump.

Condition: new, Quick-change tools, connection diameter on the machine side (DCONMS) 63 mm, protrusion length (LPR) 130 mm, shank size (SS) 63 Function: Body diameter (BD) 75 mm Body length (LB) 91.9 mm Prodpjz Slcfjfx Ai Tec Connection diameter on the machine side (DCONMS) 63 mm Overall length (OAL) 168 mm Protrusion length (LPR) 130 mm Shank size (SS) 63 - 1613.065.00, - - C6 MAHDR-45

Condition: excellent (used), functionality: fully functional, 23 spindles left/right spindles 3 pneumatic clamps spindles span 32mm pedal control CE Pedpfxjzz N S No Ai Torc

Year of construction: 2019, condition: new, We offer bending tools and punching tools for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, and HACO machines. Psdpfxed H T Tfj Ai Terc Standard and custom tools. Please send us your requirements, and we will provide you with the appropriate tool.

Condition: used, Year of construction: 2012, Manufacturer: ZOLLER, Model: Smile 400, Year of manufacture: 2012, including evaluation unit, touch screen monitor, multi-function device, manufacturer: Brother, model: MFC 9465CDN, label printer. Pedpfx Aoz Tpw Usi Torc +++ Attention: This item is part of an online auction! +++

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Psdpfx Aszrx Ihsi Tsrc Technical data: - Tool shank: 35 mm - Clamping length: 65 mm