Used Bottero Discovery 770 Dmw for sale (619)

Condition: used, Wide-track high-lift truck, pedestrian stacker, drawbar stacker HANSELIFTER - Hanse-Lifter, Model E-SDJ1016-01 Wide-track lift truck Standard model. Year of manufacture: 2014 Tedshxvuwepfx Ahmoc Rated load capacity, drawbar stacker: 1000 kg Load capacity, special attachment GIESLER: 200 kg Rated lifting height: 1600 mm Fork length: 530 / 770 mm Fork carriage width: 950 mm Ground clearance under wheel arms: 130 mm Operating voltage, hydraulic unit: 12 volts Overall height: 2160 mm Overall length: 1650 mm Overall width: 1860 / 1200 mm - Manual drive operation - Electro-hydraulic lifting mechanism - Adjustable track width from 950 to 1650 mm (width between wheel arms) - 1 piece, 12-volt battery - Separate charger, 12 volts, 15 amps - Fork base carrier on lifting frame made of steel - Fork carriage, special attachment GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Fork tines made of stainless steel, total length 770 mm to pivot plate - Fork tines cannot be lowered to the ground due to the special attachment (approx. 170 to 250 mm depending on track width) Self-weight: 485 kg Like new condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base Todpfxer D T U Dj Ahmoc - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Year of construction: 2020, condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granulate dryer type GDM -Dosing system: GDM650-2 -Tank: 1010/770/H600 mm -Individual components: see photos -Quantity: 1 device available Tsdpfx Ahjyl Tuqsmsc -Dimensions: 1170/800/H2780 mm -Weight: 521 kg

Condition: used, Year of construction: 2025, New exhibition machine! List price €17,380 net. MOVE – the highly precise vacuum press with an enormous working area for vacuum forming and vacuum veneering of curved workpieces. Featuring comprehensive flexibility due to its absolute mobility and revolutionary folding mechanism, which reduces the base area to 45% when folded. High-precision vacuum press with flap opening, including: revolutionary folding mechanism (reduces the base area to 45%) 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) – by BECKER optional, automatic shutdown when pressure is reached (for large vacuum volume) Pressure regulation from 400 to 900 mbar, analog vacuum pressure display highly elastic natural rubber membrane (up to +130 °C) Membrane quick-change system stable phenolic resin worktop (up to +120 °C), 15-layer glued gas pressure dampers for flap opening vacuum pressure display connection for an external vacuum bag easy-rolling swivel casters FESTO pneumatics and SIEMENS electrical engineering Technical data and dimensions: Working area: approx. 3050 x 1350 mm Internal frame dimensions: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1780 mm Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 kg Storage location: Rieth Tedpjyi Hd Hsfx Ahmec

Condition: used, functionality: fully functional, machine/vehicle number: 35545, mileage: 115,900 km, power: 129 kW (175.39 HP), first registration: 11/2019, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, tachograph, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. DUONIC dual-clutch transmission, differential lock, R4 engine, front axle stabilizer, plastic fuel tank for 100 liters, AdBlue tank, Active Brake Assist 6, MOSOLF rear end cross member on the frame end, ESP, ABS, disc brakes front and rear, automatic headlight control with light sensor, high beam assistant, front protection assistant, intelligent speed assistant, attention assistant, blind spot assistant, emergency braking assistant, lane keeping assistant, cruise control, hill start assist, MOSOLF wiring harness and trailer socket 12 V, 13-pin, 3-seater, driver's comfort suspension seat, passenger seat as a 2-seater, multifunction steering wheel, heated rearview mirror, reversing warning, reversing camera, touchscreen DAB radio, Apple Car Play, automatic climate control, emergency brake light, storage compartment above the windshield, interface for refuse collection vehicle EN1501-1:2021-05, 18-pin, Zöller color graphics terminal Bio drain 2", rear locking mechanism, central lubrication system BEKA-Max, Motec rear area monitoring, 1 step, step monitoring, 2 rotating beacons, 2 work lights, underrun protection, 2 reversing lights, the body has a permanently installed Zöller hopper (Type 359) for MGB 80-340 Lite/MGB 500-1200 liters/MGB 770-1300 liters with sliding cover. Todpfx Ahszkhwcsmoc

Condition: used, functionality: fully functional, mileage: 325,691 km, first registration: 01/2023, fuel type: diesel, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, airbag, onboard computer, parking heater, Iveco Stralis S-Way 530 - Registered: 01/2023 - Retarder: Intarder - Mileage: 325,691 km Tjdpfx Aheziddismjc - Auxiliary climate control - Double bunk - Double refrigerator - Leather interior - Heated seats *Price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON-SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz Isuzu - Fixed box body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Box body - Drop-side - Reefer cell - Insulated with refrigerator - Van Domenico Truck srl declines all responsibility for any discrepancies regarding technical specifications, optional features, and characteristics that may differ from those stated in the description. We invite you to verify the characteristics of the specific vehicle.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Used AT ENGINEERING model AT 1100 stainless steel paddle mixer with all accessories. - Manufacturer: AT ENGINEERING - Model: AT 1100 - Material: Stainless steel AISI 304 - Capacity: 330 - 770 litre working capacity, 1100 litre total capacity (product dependent) - Mixing Chamber: approximately 1740 mm long x 950 mm diameter - Discharge Type: Pneumatically operated bomb door type discharge valve - Type of blades: Stainless steel shaft with paddle blades - Motor: 37 kW, 1485 rpm, 50 Hz electrical motor with gearbox, final rpm 130 rpm Includes: - Stainless steel containers for filling or discharging material. - Screw conveyor for moving the mixed material from container into the filler. - Powder filling machine - Stainless steel switchboard with integrated control panel Tedpfezlxy Rox Ahmoc - Stainless steel platform

Condition: used, functionality: fully functional, mileage: 487,338 km, first registration: 10/2019, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, Bluetooth, additional headlights, lane keeping assist, onboard computer, parking air conditioner, SCANIA 650 S V8 Year: 2019 Mileage: 487,338 km Full air suspension Retarder Alloy wheels Auxiliary air conditioning Navigation system V8 leather interior WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS Tsdpfx Ahjzmiubsmsc CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM VARIOUS BRANDS: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540- 460 hp - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition Tarp - Box - Tail lift - Reefer cell - Insulated with reefer - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and features that may differ from the details provided in the description. We invite you to verify the specifications of the specific vehicle.

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. Tsdpfx Ahjvbqlhsmsc WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: good (used), Year of construction: 1963, functionality: fully functional, machine/vehicle number: 24410, • Model: Heidelberg SBG • Type: 1-colour letterpress • Application: Paper processing / die-cutting and printing operations • Year of manufacture: 1963 • Format: 560 × 770 mm • Condition: Standard machine Tjdpfxsxzzyre Ahmec • Features: Robust classic letterpress machine, ideal for die-cutting, embossing, and specialised applications

Condition: used, This listing is for 1 of 4 Liferiver EX3600 Extraction System. The unit is in full working condition and is ready for immediate release. Tjdpfoxxyf Isx Ahmjc The Liferiver EX3600 is a cutting-edge, fully automated nucleic acid extraction system designed to enhance laboratory efficiency and convenience. Here’s a detailed overview of its standout features and applications: Key Features: - Versatile Sample Volume: The EX3600 can process a wide range of sample volumes, from 20 to 200 microliters, making it suitable for diverse applications and sample types. - High Throughput: Capable of handling up to 24 samples in a single run, the EX3600 significantly boosts productivity, particularly in high-demand research environments. - User-Friendly Interface: The integrated LCD screen provides clear, real-time monitoring of the extraction process, allowing users to easily track progress and make adjustments as needed. - UV Sterilization: Equipped with a UV lamp, the system ensures sterilization of the working area, which is crucial for preventing contamination and maintaining sample integrity. - Quick Processing Time: The entire nucleic acid extraction process takes approximately 20 minutes, enabling rapid turnaround for critical experiments, such as those in diagnostics or research settings. - Magnetic Bead Technology: Featuring a magnetic bar for efficient handling of magnetic beads, the EX3600 streamlines the extraction process, reducing manual intervention and minimizing errors. Applications: - Whole Blood and Plasma: Ideal for clinical applications, particularly in genetic testing or infectious disease diagnostics. - Serum Samples: Useful in biomarker discovery and research. - Cells: Supports cellular research and analysis. - Food Samples like Milk: Perfect for food safety testing and microbiological analysis. - Fecal Samples: Essential for studies in microbiome research or gastrointestinal health. - Specialized Use: - The EX3600 is particularly effective for extracting viral RNA, making it a valuable tool in the fight against infectious diseases, including COVID-19 detection. Trained laboratory personnel can prepare samples before utilizing the automated system, ensuring consistent and reliable results.

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Tedex Dkr Njpfx Ahmsc Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,548 h, clamping force: 1,600 kN, screw diameter: 45 mm, injection weight: 294 g, overall weight: 6,983 kg, Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details. • Tie bar distance: 520 mm • Injection unit: 600 • Control: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) Tsdezbh Epspfx Ahmjc • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Max pressure: 190 bar • Platen size: 770 x 770 mm • Max mold weight: 1300 kg • Max opening stroke: 500 mm • Min/Max mold height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Condition: like new (used), functionality: fully functional, mileage: 181,572 km, first registration: 03/2024, fuel type: diesel, fuel: diesel, brakes: intarder, color: red, gearing type: automatic, suspension: air, Equipment: ABS, Bluetooth, navigation system, onboard computer, parking air conditioner, Iveco Stralis S-Way 530 - Registered: 03/2024 - Full air suspension - Retarder: Intarder - Mileage: 181,572 km - Stationary air conditioning Tedszly Hrspfx Ahmjc - Double bunk - Heated seats WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540- 460 hp - Xway-X-Way-Three-sided - V8 - Scania - Frost Edition - Box body - Drop-side - Refrigerated cell - Insulated with refrigerator - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and features, which may differ in some cases from those stated in the description. We invite you to verify the specifications of the specific vehicle.

Condition: like new (used), functionality: fully functional, mileage: 255,558 km, first registration: 06/2023, fuel type: diesel, fuel: diesel, brakes: intarder, color: yellow, gearing type: automatic, Equipment: ABS, Bluetooth, onboard computer, parking air conditioner, Iveco Stralis S-Way 570 -Full air suspension -Registered in 2023 -Retarder: Intarder -255,558 km -Auxiliary air conditioning -Double bunk WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. Tjdozl Acpjpfx Ahmsc OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer-Refrigerated Semi-trailer – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Three-sided- V8 - Scania - Frost Edition Tautliner-Box-Tailgate lift - Refrigerated cell- Insulated with refrigeration - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and characteristics that may differ in some cases from the options indicated in the description. We invite you to verify the characteristics of the specific vehicle.

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Tjdpfxoztwkdj Ahmjc Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Tedpfx Ahjzkanyjmoc Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), functionality: fully functional, The original specifications for the TABAI ESPEC PVH-210: Specification Value Todpfsziby Ijx Ahmjc Type Precision industrial oven / clean oven Temperature range Ambient +60 °C to 350 °C Chamber size 580 × 480 × 480 mm (W × D × H) Chamber volume Approximately 134 L External dimensions 770 × 925 × 1290 mm (W × D × H) Power supply 200 VAC, 3-phase, 50/60 Hz Current 17.5 A Shelves 1 standard shelf Construction Stainless steel chamber with forced-air circulation Controller Digital temperature controller

Condition: good (used), Waters Type: Synapt G2-Si SYNAPT G2-Si mass spectrometry (TOF with ion mobility) New possibilities for discovery in your laboratory Data, data processing, and groundbreaking performance. SYNAPT enables the detailed characterization of complex mixtures and molecules with uncompromising qualitative and quantitative performance, optimized workflows, and a platform of unparalleled versatility. Ultimate UPLC/MS/MS performance Powerful data-independent and data-dependent solutions CID and ETD fragmentation Wide range of experimental options Upgrade to three separation dimensions! Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) Tsdpezhkcvjfx Ahmoc We will be happy to answer any further questions you may have over the phone.

Condition: new, color: black, driver cabin: other, gearing type: other, loading space volume: 14 m³, loading space length: 5,300 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, Vehicle location: Bovenden, chute, swinging flaps Superstructure: Meiller 3-way tipper body with aluminium side boards and chute, approx. 14 m³, spring flap support on the left, year of manufacture 2016! Tsdpoy Ua Ausfx Ahmjc Auxiliary frame width approx. 890 mm at the front and approx. 770 mm at the rear! Dismantled from a Daimler demonstration vehicle! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Equipment: type plate available, ZEISS O-INSPECT 442 Multisensor CNC Coordinate Measuring Machine Manufacturer: Carl Zeiss IMT GmbH, Germany Type: O-INSPECT 442 Machine Type: Multisensor CNC Coordinate Measuring Machine Measuring Range: 400 × 400 × 200 mm For sale is a used ZEISS O-INSPECT 442 coordinate measuring machine, including a comprehensive set of original ZEISS accessories, measuring sensors, software, and a vibration isolation platform. The O-INSPECT 442 combines highly precise optical and tactile measuring technology in a CNC-controlled measuring machine. The combination of ZEISS Discovery V12 zoom optics, VAST XXT probe system, and the installed ZEISS CALYPSO 2019 measuring software makes this system ideally suited for quality assurance, incoming goods inspection, toolmaking, precision engineering, medical technology, research, and development. Technical Data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: 622810-9806-000 Serial Number: 138890 Year of Manufacture: 2008 Measuring Range X: 400 mm Measuring Range Y: 400 mm Measuring Range Z: 200 mm Max. Workpiece Weight: 40 kg Supply Voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 1500 VA Measuring System: ZEISS VAST XXT tactile measuring system ZEISS Discovery V12 telecentric zoom objective White light distance sensor Coaxial top light Through-light illumination 16-segment multi-color ring light Automatic CNC measuring cycles Software: ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Documentation Dimensions: Machine (W × D × H): approx. 1,055 × 1,351 × 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Bilz vibration isolation platform: approx. 360 kg Total weight: approx. 1,160 kg Equipment: ZEISS O-INSPECT 442 coordinate measuring machine ZEISS VAST XXT probe system ZEISS Discovery V12 zoom optics Original ZEISS control panel ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Reference standard Comprehensive set of ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Clamping technology and other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Scope of Delivery: ZEISS O-INSPECT 442 coordinate measuring machine Original ZEISS control panel 2 Industrial PCs 2 Monitors ZEISS CALYPSO 2019 measuring software Original software media Original ACRONIS recovery/boot media Documentation Tedszl Dkuopfx Ahmec Reference standard ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Comprehensive clamping and holding devices Other accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: good (used), Year of construction: 2012, lifting height: 5,700 mm, fuel type: electric, Empty weight: 1.510 kg Working height: 770 cm CE mark: yes Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: JLG Model: 1930ES Year of build: 2012 Condition: Used Data: Max. working height: 7,70 m Max. platform height: 5,70 m Drive type: Batterie Platform dimensions: 1,86 x 0,74 m Lifting capacity: 230 kg Tsdpfxjzmxdfo Ahmec Lifting capacity on extension: 120 kg Total dimensions LxW: 1,87 x 0,76 m Height transport position with railing: 1,97 m Height transport position without railing: 1,15 m Ground clearance: 0,08 m Empty weight: 1.510 kg Special features: white tires, anchor points for fall protection systems (PPE) available, indoor use only. Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), overall weight: 730 kg, table length: 1,600 mm, table width: 1,000 mm, Equipment: CE marking, documentation/manual, Lights! Camera! Action! This CNC laser machine has a working area of 1600x1000 mm, which is lit by light panels on the sides, and a Canon camera. All for it to majestically operate fabrics, fut, tule, leather, and other materials. The camera recognizes and scans contours and shapes, and then transfers them to the computer. In a special program, the operator can make the necessary changes to the drawing and send it for cutting. Easy and convenient. There is no need for a hand-made lingering process. You can give our managers a call for additional details! Wattsan 1610 Cam conveyer characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2200 x 1800 x 1105 mm Packing size: 2300 x 1980 x 1200 mm Tedpfxjrzrmbs Ahmsc Weight: 770 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. Tjdpfxet Hwt Sj Ahmoc * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: used, Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine, magnetic grinding machine -Manufacturer: Blohm, surface grinding machine-horizontal Tjdpfx Ahst N Adbomec -Table size: 770 x 140 mm, swiveling -Travel paths: x 490 mm / y 200 mm / z 220 mm -Dimensions: 1030/870/H1510mm -Total weight: 403 kg