Used Breadcrumb Grinder for sale (1,286)

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Gsdpfx Apsq Dzi Tenoiu Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° Gedpfx Apou Ng Npenoiu grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Year of construction: 1993, Technical details: material: PUR Schaum Rotor-Ø: 315 mm compressed air: 6 bar Gjdju Nxdfjpfx Apnoiu The milling plant with milling and opening-up machine REKORD BR-ex (explosion proof up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Data of the processable material: - pre-comminuted PUR foam pieces max. 20mm - humidity so that milling is still possible - throughput volume=approx. 130kg/h Drives: - 5 drives (all geared motors) for roller dosing units, mill drive (squirrel cage motor), mixer, discharge screw conveyor, bucket wheel *

Condition: new, Technical data: Belt speed: 15 / 30 m/s Sanding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Surface grinding table: 400 x 100 mm Contact wheel ø x W: 195 x 100 mm Suction connection ø: 2 x 75 mm Speed: 1420 / 2660 1/min Motor power: 2.5 / 3.3 kW Dimensions (WxDxH), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension due to spring-loaded tensioning device - With cylindrical sanding device for sanding diameters from diam. 20 - 76 mm as standard - Quick and easy adjustment of the desired sanding angle Godpfx Aeqvmqyepnoiu - Graphite coating on the face grinding surface increases the sliding properties of the sanding belt - Large flat sanding surface with protective cover - Slow belt speed (15 m/s) optimal for sanding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the sanding rollers without tools - Various sanding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery: - Sanding belt K 36 - Rubberized sanding drum - 1 sanding roller for 1 1/4" (42/44 mm pipe) - 2 hinged protective discs - Sanding and support table - 2 x dust extraction nozzles diam. 75 mm - 2 x chip container - Graphite coating - Motor protection switch

Condition: used, TECHNICAL DETAILS - center height : 320 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 3000 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] Godpfxeyn R I Tj Apnsiu - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] POWER SUPPLY - Supply voltage : 380 [V] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Heidenhain display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 12000 [rpm]

Condition: used, Year of construction: 2019, control Fanuc Series 31i - B workpiece length - max. 300 mm grinding wheel diameter 356 mm Gsdpfxoy Tprpo Apnjiu grinding wheel width 75 mm quill stroke 45 mm

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Serial number: 3837 FEATURES: Godpfx Ajy S Akpspnsiu – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation – Precision machine – Equipment visible in the photos

Condition: good (used), Longitudinal travel 450mm Wheel diameter 175mm Gsdpfefgd Hhox Apnoiu Turning tool holder Dividing head with collets Table D-140mm coolant installation MARCELS MASCHINEN CH

Condition: used, Kilia grinder with a throat diameter of 130mm is a reliable and durable device. The design combines high efficiency with good quality of minced meat produced. Mainly intended for grinding fresh and slightly frozen meat and vegetables. Perfect for small and medium-sized production plants. It has two gears, pushing auger, and lifter for 200l meat bins. Manufacturer: Kilia Model: E130, 130mm Height: 1900 mm Width: 2100 mm Length: 1400 mm Weight: 1200 kg Capacity: 230 l Electric power supply: 400V 50Hz 3N Godozbk Ndopfx Apnjiu Total power: 11/17 kW Throat Diameter: 130 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Giodpfoyz Dwcox Apneu Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: used, Year of construction: 1986, grinding length . mm grinding width . mm workpiece height . mm Table 870x130 mm total power requirement 2,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2x1x2 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Godeytx Ifjpfx Apnoiu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Max. rpm A: 60 min/-1 centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m Gisdjw E Npxspfx Apneu CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: excellent (used), Long-belt sanding machine PS300 - Table size 3000 x 800 mm - 380 Volts Godpfx Apjy Tqw Hsnjiu - Belt length 7800 mm - Electric table adjustment - Upper belt cover - Ott sanding table - 3 kW - Throat 550 x 220 mm - Weight: approx. 700 kg

Condition: used, Surface grinder MAEGERLE MFP-125-35 Godpfx Apoy Tzcmensiu

Condition: excellent (used), Samco Unilev 15 Edge Sander Gisdpfxjxd Rl Ne Apnju Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: excellent (used), OMAB/Comec curved part grinder Gsdpfetvfmhox Apneiu Working width 200mm Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Giodpfx Asxmgrqepnju Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm

Condition: excellent (used), Volpato LBK 150 edge grinder Grinding belt height 150mm Length of the grinding belt 2650mmm Gisdpfxjvdpyvo Apneu Oscillation of the grinding belt mechanical Raising/lowering the unit from the control panel Main motor 3kw Oscillation motor 0.37kw CE certificate Extraction nozzle 110mm

Condition: excellent (used), Volpato LS-1NR edge grinder with chamfers Working height 10-100mm Aggregate system: 1.5kw grinding unit 1.5kw upper chamfering unit 1.5kw lower chamfering unit Mechanical grinding belt oscillation Chafer speed regulated by means of an inverter up to 9900r.p.m Feed speed regulated by means of a variator 5-30m/min Giedpfx Apjwhx Hxonju Grinding unit at various angles 2450x80mm grinding belt length

Condition: excellent (used), Volpato LASM Edge Sander Mechanical oscillation Godpfx Apjwcflqenoiu Constant grinding speed 1.5k3 motor Grinding height approx. 100mm Belt length 2640mm Height 130mm Extraction nozzle fi 100mm

Condition: used, Year of construction: 1998, total height: 2,500 mm, total length: 5,900 mm, total width: 3,000 mm, Empty weight: 6.700 kg Price: On request Gjdpfx Asx E Uknspneiu - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 199851086/1098 - Drive system: Conventional - Power [kW]: 11.0 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 680 - Z-axis travel [mm]: 400 - Table width [mm]: 1600 - Table depth [mm]: 670 - Magnet width [mm]: 1200 - Magnet depth [mm]: 600 - Motor power: 11.0kW - Transport dimensions: 5900mm x 3000mm x 2500mm (l x w x h) - Transport weight [kg]: 6700kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Godpfey Tifcex Apnoiu Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: good (used), I sell Fein MSfv 649 Angle grinder with long neck. In bdb condition Gsdpjuhm I Hefx Apnoiu

Condition: good (used), I sell the FLEX H1212Z SIMPLE SANDLER, operational in bdb condition. Gijdpfx Asuhm Imopnsu

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, BERGER drill grinding machines are precise - fast - simple - economical And they help you increase productivity. These ergonomic and easy-to-use, precise drill grinding machines offer you, among other things, the following advantages: Gjdpfebrptvjx Apnsiu • Significantly increased tool life of your drills through even distribution of cutting forces across both cutting edges • Significant reduction of feed forces thanks to precise, symmetrical point thinning • Improved diameter accuracy - the precise and optimizable grinding results in holes whose diameter exactly matches the nominal diameter of the drill. • Improved positional accuracy - the sharp drill tip, precisely pointed and close to the center, no longer "wanders" upon initial contact with the workpiece, but cuts smoothly from the start • Resharpening, point thinning, and inspection in a single setup Furthermore, the purchase of new drilling tools is drastically reduced, as you can now resharpen your existing drills up to 40 times or more in-house! So you're not only protecting the environment, but also your wallet, and, most importantly, your employees' nerves! Keep up with the times... keep up with BERGER technology. Our EPG-1 has been copied countless times over the past 18 years, but its quality has never been matched... With EPG1 / #easy-point-grinder #Grind your drill bits for your material and your operating conditions! For drills (HSS and solid carbide) with diameters ø 7 – 20 mm (Optional ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° point angle Technical Data EPG1 Point angle continuously adjustable 90° – 140° Collet set for drill diameters 7 – 20 mm Optional collet set for drill diameters 3 – 8 mm Optional collet set for drill diameters 20 – 30 mm Point thinning device, point thinning depth continuously adjustable CBN grinding wheel (for HSS drills Ø 118 mm) Optional diamond grinding wheel (for carbide drills) Ø 118 mm Single-phase AC industrial motor 250 watts Spindle speed 2900 rpm Electrical connection 230 Volt 50 Hz Dimensions (L x W x H) approx. 30 x 40 x 20 cm Weight approx. 22 kg Sharpen your drill bits for your material and application conditions quickly, easily, precisely, and affordably