Used Cable Granulation System Mg Recycling 380Vzt for sale (42,472)

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Fgedsxy E Siepfx Accjc Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Fgodpfx Acexy Iikscoc Available immediately

Condition: like new (used), functionality: fully functional, Z1015201800 Fodpfjxy I D Usx Accegc Z1010880270 etc.

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected. Fgedev Rpxlspfx Accjc

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotational, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen hole size optional (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Fgjdpfx Acjgmfa Aecec Dimensions (lxbxh) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented base + €2,170 net (prevents the slide from blocking. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. Fgjdpfozcf Dlex Accoc 5m Bucket elevator made by Perrys of Oakley.

Condition: used, REF: MM6436 Fsdpfoza T I Hsx Accjgc Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: new, The scope of delivery includes: 1x Top tool, new Tool system: UKB system Trumpf / Wila / LVD with Simple Clamp Type: 15320-500 (15320X) Fjdpfx Acszcuqbscsgc Angle: 28° Radius: R 1.0 mm Length: 500 mm Width: 24 mm Height: 120 mm Load capacity: 800 kN/m max. Material: 42 CrMo4 Weight: ≈ 10 kg Internal reference: DE-KW23-26-03 Explanation: The tool is used in bending presses (also known as die-bending presses) for industrial sheet metal processing. The standardized tool holder, "Simple Clamp safety button," allows the operator to install and remove the segment vertically at any desired point of the press clamping mechanism. Note: This tool is being sold as part of a customer return (purchase date: April 2026) and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, power capacity / kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m SYSTEM ANTRIEBSTECHNIK DSF4-14.4-20R.N3-0VD Nr. 3030799 Fgodpfszcgmzsx Accjc

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Fsdpfx Aceyzc Ruecsgc

Condition: new, Year of construction: 2026, functionality: fully functional, The STF 3.0 float-sink separator with a highly efficient SP1000 Mk2 centrifuge and VS1 water screen. A compact yet powerful washing system that requires little maintenance and can wash and sort up to 3,000 kg/h of hard plastics. Fgodpfxsxhf H No Accoc The machines are constructed entirely from 304 stainless steel, allowing salt solutions to be used without any issues. A zinc float tank with centrifuge, water screen and big bag station is in stock and available for immediate delivery; further machines are available to order. Please contact us for further information.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 8,070 kg Payload: 34,930 kg Fedpfx Ajy Irnveccsgc GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 353 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 04/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Fjdpszaz Diefx Accogc Rear axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 12 mm Rear axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 9 mm Weights Unladen weight: 6,595 kg Payload: 32,405 kg GVW: 39,000 kg Condition Damage: None

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Fgsdpovf E Avjfx Accoc Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2020, operating hours: 28,257 h, machine/vehicle number: 52011345674582, load capacity: 350 kg, overall weight: 7,490 kg, product width (max.): 2,520 mm, working height: 30,000 mm, enginetype: Diesel, manufacturer: SYSTEM LIFT Fsdox A N Rujpfx Accjgc

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, working width: 1,100 mm, Fully functional, with extra new sanding brush attachments; the workpiece is guided through the machine via two belts. Fedpfozaapdjx Accogc

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: Fgodpfozamu Hox Accec * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: used, Brand: SOCO MC-350 Suitable e.g. for cutting aluminum, brass, copper, PVC and carbon Cutting power tube at 90 °: 101.6 mm Cutting capacity profile, 90 degrees: 76.2 x 127 mm Saw blade dimensions: 355.6 mm automatic dosing length: 685.8 mm Grades: 2 Shortest cutting length (automatic): 1/4 ”6.35 mm Saw motor: 5 HP 1750 rpm Voltage: 220/3/60 Fgsdsgtmi Uspfx Accoc

Condition: used, axle configuration: 1 axle, first registration: 11/2011, suspension: air, tire condition: 40 %, color: other, Year of construction: 2011, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension Fjdpfx Aey Uiz Tjccsgc - Disc brakes - Steering Axle = More information = Make axles: SAF Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels Tail lift: MBB, tail lift, 2500 kg

Condition: used, The MG TLG single-head up-cut saw is equipped with a Ø 350 mm blade and a rotating table for cuts at 45°, 90°, and intermediate angles. The machine offers a maximum cutting height of 125 mm. Fsdpezcfdxofx Accegc Technical Specifications Blade diameter: 350 mm Table rotation: 45° – 0° – 90° Pneumatic clamps Three-phase motor 220/380 V or single-phase 220 V Motor power: 2 HP (three-phase) / 1.5 HP (single-phase) Cutting speed: 42 m/s Built-in automatic lubrication system Maximum cutting height: 125 mm Movable support turret Dimensions Length: 800 mm Width: 700 mm Height: 1,225 mm Weight: 150 kg

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 6,090,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming Fgedoyik Hcjpfx Accjc -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , Fgedpoyx A Uujfx Accsc display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. Fgsdpfsyzim Aex Accoc -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: used, functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 190 mm, side roll diameter: 170 mm, roller length: 2,600 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, overall weight: 2,800 kg, total length: 4,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Bending capacity -Plate width : 2500 mm -Rolling plate thickness: 6 mm -Prebend thickness: 4 mm Rolls dimensions: -Useful length 2600 mm -top roll D 190 mm -side rolls D 170 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls • Power driven total on the 3 rolls, hydraulic motor each roll • Conical bending hydraulic attachment Fgjdpfey H Aytox Accoc • Re-rolling system welded shells rounding. • Opening hydraulic front drop-end • Electric 3 phase 380/50 Vac, power 5,5 Hp. • Speed infinitely variable slow-fast stepless • Digital position readouts of the bending rolls.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: 4axis autocalc, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 250 mm, side roll diameter: 180 mm, roller diameter: 300 mm, roller length: 4,100 mm, working width: 4,000 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, power: 5 kW (6.80 HP), input voltage: 400 V, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, model capacity 4000x6 mm CNC EVO plate roll Hydraulic 4 roll plate bending machine used year 2017 plate thickness rolling 6 mm pre-bend 4 mm minimum rolling diameter ID 300 mm plate max width on the rollers 4100 mm top roll size 250 mm lower roll 240 mm side rolls 180 mm Power on hydraulic unit 5,5 kw Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted with CNC EVO 4 axis Automatic plate roll programmable on drawing import from CAD station Rolling compensation upon plate different yield strength data input Hydraulic rotation central rolls driven Parallelism of the 4 rollers lifetime with torsion bar Pre-pinch setting upon plate real strength for best pre-bend Drop-end open front for unloading closed shells Re-rolling system for welded shells precise calibration. Safety and emergency stop installed Fgjdpfx Ajy I Sp Toccsc Manuals and schematics service and instruction books