Used Cantilever Structure for sale (3,169)

Condition: good (used), Year of construction: 2019, Racking Hall consisting of cantilever and pallet racks, OHRA, floor area approx. 867m² – used –: Price ex location: €99,500 (net), for self-dismantling! Price for dismantling available on request. Material to close one gable side is also available at extra cost! Manufacturer: OHRA Year of manufacture: 2019, sheet metal 2021 Hall dimensions: Width: approx. 17.35m Length: approx. 50m Height rack: approx. 6,385mm Ridge height: approx. 7.10m After disassembly, one long side of the hall remains open (where it currently adjoins the existing building) Cantilever racking: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20m Arm load: 1,400kg Load center: 600mm Post load per side: 4,200kg Axle spacing: 2m Arms are plugged in Ksdpfoyk H Risx Andsna Arms have load deflectors, preparation for unrolling protection Incl. pallet beams Base level plus 3 arm levels per side Total depth: 2.70m (2 x 1.20m plus 30cm frame) Aisle width: 3.25m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet racking: Manufacturer: OHRA System: pallet racking P3 Year: 2019 Bay width: 2,900mm, four bays at length 2.40m Bay load: 2,000kg Field load: 6,000kg Top edge 1st support (buckling length): 800mm 1 row with 17 frames, 1 row with 19 frames (there are pipes at two locations) Number of frames: 36 Rack length: approx. 48.10m Frame depth: 1.10m Frame width: approx. 10cm Beam height: approx. 10cm Beam thickness (bearing surface): approx. 5.5cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pcs at 2.90m and approx. 24 pcs at 2.40m length Snow load zone: 1 (0.65kN/m²) Wind zone: 1 / Terrain category 0.48kN/m² Available: immediately Condition: good, slight rust on outer frames and faded paint Location: Hockenheim region Drawing available as PDF, parts list, structural calculations. The sideloader shown in the photos is also for sale at extra cost (it recently received a nearly new battery for approx. €9,600 net).

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: MING1+11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,050 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,050 mm, axle spacing: 1,900 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 7,000 kg, Equipment: double-sided, OHRA K60K - Double-sided cantilever rack, long goods rack, heavy-duty rack Two racks are available!!! 12 uprights - 48 cantilever arms K60K Height 3.05m - Uprights IPE200 - Upright spacing 1.9m center-to-center Total depth approx. 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Ksdov Smk Iopfx Andsna Incl. wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Consisting of 15 uprights + 60 cantilever arms Ksdpsv Smm Nofx Andona Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7500kg Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Knodov Smr Sjpfx Andoa Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: new, Year of construction: 2023, No. 04377 Brushing and structuring machine VOLPATO SPO 600 Year of construction 2023, new, immediately available, made in Italy VOLPATO has been building grinding machines for over 60 years Working width 600 mm Machine open at the side for double pass and double grinding width of 1200 mm Electric height adjustment of both units independently of each other Maximum grinding height 330 mm (360 mm) depending on brush diameter both brushes tilt 0-10° (20°) Maximum diameter of brushes 320 mm Brush rotation infinitely adjustable 180 - 600 rpm Change of direction of rotation of the brushes possible Electric height adjustment 0 - 330 mm with Siko indicators Brushes are stored on round bars with a diameter of 90 mm each with linear guides Infinitely adjustable feed speed of the conveyor belt Table height thanks to adjustable feet 800-850 mm Suction nozzle 2 x 180 mm EMERGENCY STOP BUTTON Motor power of the grinding units 2 x 4 kW Motor power of the conveyor belt 0.55 kW Table dimensions 2000 x 860 mm Includes 1 steel wire and 1 Tinex plastic brush, each 250 mm diameter, 80 grit NET WEIGHT 700kg CE declaration of conformity Ksdpfx Asqrtv Rjndjna Operating instructions in English Brush units inclined up to 20 ° with respect to the direction of movement = when the wood rusts, the veins are also highlighted transversely thanks to a helical action of the brushes The machine has 3 inverters, one for adjusting the belt speed and 2 for the brush units = many finishing configurations available Double direction of rotation of the brushes 4kW motors with belt transmission giving double torque to the brush units The images serve as an example and represent an identical machine Transport dimensions approx. 2100 x 1300 x 1900 mm LWH Weight 750kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition According to the manufacturer, the warranty is 1 year after delivery Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cutting unit, Random System: Saw cutting head 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Kedjhwrp Rspfx Andena Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2800 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 1500 kg

Condition: as good as new (ex-display), functionality: fully functional, The ibg Ring Tester Large is engineered for automated crack inspection of bearing inner and outer rings with diameters ranging from 45 to 100 mm. The system conducts a structural analysis, followed by a line-scan inspection of the raceways as well as the inner and outer diameters, utilizing the eddyvisor C. After inspection, components are automatically classified and sorted as either OK or NOK. The testing unit is mounted on a durable metal frame designed for industrial manufacturing settings, featuring integrated compartments for the steel enclosures that house the measuring equipment and PLC (including Siemens PLC). Clean, upright components are separated, fed into a transport wheel, and accelerated into rotation via belts. At the inspection station, adjustable rollers provide lateral fixation while probes perform surface defect detection; thereafter, components are automatically sorted into OK and NOK. Prior to testing, rings must be free of particles and residual liquids. The system follows ibg’s good-part-only policy, with NOK samples reserved exclusively for checking detection sensitivity during test runs. Infeed height: 1550 mm; discharge height: 1220 mm. Kodpjy H Dkasfx Andjna For further information, please visit our website.

Condition: good (used), painted with cover belt 1000 mm wide length A-A = 20 m smooth belt can be divided into 3-5 m sections free loaded ex works (already on yard) Kedjr Ha Tlopfx Andena The price is 2,500 EUR net, negotiable. Offer subject to prior sale and availability.

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, cutting height (max.): 305 mm, control type: manual, actuation type: manual, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, overall weight: 19 kg, torque: 5 Nm, cable length: 4,000 mm, saw band length: 1,710 mm, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, PBS300 TITAN – 300 mm Cutting Capacity The PBS300 TITAN is a professional portable bandsaw designed for processing large structural timber sections up to 300 mm. The machine combines high cutting capacity with a compact and lightweight construction, making it suitable for carpenters, timber frame builders and woodworking companies that require a mobile solution for cutting large wooden elements. Despite its compact size, the PBS300 TITAN provides stable cutting performance in thick structural timber. Well-adjusted machines can cut timber sections up to maximum thickness without noticeable blade drift. The design focuses on rigid blade guidance, efficient manufacturability and practical usability in professional environments. Key Features • Maximum cutting height: 300 mm • Designed for structural timber processing • Hybrid blade guide system (steel guides + bearings) • Precision-machined aluminum band wheels • Compact and portable design – 19 kg machine weight • Robust welded aluminum frame construction • Developed specifically for professional users Typical applications: • timber frame construction • carpentry workshops • log house building • structural timber processing Technical Specifications Cutting height: 300 mm Band wheel diameter: 203 mm Blade length: 1710 mm Blade width: 6–13 mm Guide table size: 420 × 310 mm Motor: asynchronous electric motor Power: 0.75 kW Speed: 1420 RPM Power supply: 230 V (single-phase) Protection class: IP54 Connection cable length: 4 m Machine weight: 19 kg Manufacturer Knedpfx Anov Tcuxedsa Astra Pro Sp. z o.o. We manufacture machines for other companies as an OEM supplier. The PBS300 TITAN is our own model developed based on years of manufacturing experience in this niche market. More Information If you are interested in the machine, please contact us for technical details, pricing and delivery information.

Condition: excellent (used), Blanco food serving with glass top Blanco food counter refrigerated display case Kjdpfsi Tvqhsx Andona 40 mm granite table top Bianco Berrocal Funiert beech front panel Tray/plate slide Power supply: 230 V with lighting Dimensions: Width: 254 cm depth: 80 cm Depth with plate slide: 110 cm Height: 190 cm Cooling information: Without compressor unit / refrigeration unit Central cooled for connection to external refrigeration system Last test 09.2022 You can find more food editions - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Cantilever rack, double-sided, 10 levels, arm extension 380 mm, extendable by 220 mm, height 2420 mm, total depth 1000 mm, length approx. 2700 mm, cantilever arms made of 80 mm U-steel, very robust design, the rack is hot-dip galvanized, weight 1190 kg, rack disassembled for transport. Kodpfx Anjw Icyusdjna

Condition: new, functionality: fully functional, Structuring / grinding brush package Manufacturer: Ehrholz Compatible with variable-speed angle grinders (M14 thread), max. 4500 rpm Clearance package with various grits. The items are new, only the outer packaging is missing. Knedpfx Aow Hrypendsa Consisting of: 28 grinding/structuring brushes in grit 46 and 80

Condition: new, functionality: fully functional, Structuring / Sanding Brush Set Manufacturer: Ehrholz Compatible with Makita 9741 brush sander Surplus package with assorted grits. The items are new, only the outer packaging is missing. Includes: 11 pieces grit 60 10 pieces grit 80 3 pieces grit 100 Knedpfx Aew Eybxjndoa

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm Kedpfjd Tbbdsx Andjna - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Kodpomhhx Iofx Andona Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Ksdpfx Ajmhhyasndona The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level. Ksdsd Tqalopfx Andena

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm Knodpfxjh Ek Das Andoa - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm Kedofdkb Uopfx Andjna 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Knsdpfjmhhf Sjx Andea

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Kedpfemhhl Hox Andona Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Kjdpfsmidyfsx Andsna We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Knjdomkixwopfx Andea The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm Knedjfdkbhspfx Andoa - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) Kjdpeqt Dmyefx Andena - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.