Used Cascade Push Pull for sale (3,705)

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing Nodpfxou Sv S Eo Aaxedc -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing Ndodpfxeu Sv Umo Aaxjc -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Tilting, Electric Winch Features: - Electric winch - Additional ramps - Electric tailgate Net price: €43,655.46 / Gross price: €51,950.00 Article number: R7B335602322.02 Technical data: • Brand: Brian James • Model: Race Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: Not yet registered • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 600 x 235 x 220 cm Ndodpfx Aaoz Ri Etjxsc • External dimensions (LxWxH): 770 x 255 x 278 cm • Loading height of the floor: 58 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,538 kg • Payload: 1,962 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Lightweight yet extremely stable • Full-length skylight running the entire length of the trailer • Handles for maneuvering at the front and rear • Front compartment doors on both sides facilitate securing the front wheels • Rear compartment doors on both sides facilitate securing the rear wheels • Large double-leaf side doors on the left and right, lockable • Electric tailgate with full height and width • 2 x attachable additional ramps, aluminum, 1.5m long, for very low vehicles • Rollers in the rear of the vehicle • Interior height 220cm - Entry height at the rear 209cm • Side tower dimensions: XXX cm x XXX cm (W x H) • Lower edge of side door height inside: XX cm • Perforated lashing floor offers high slip resistance and is extremely durable, even under the most demanding conditions. • Numerous lashing points and a high-strength floor provide flexible lashing options and perfect grip. • Wheel stops, fully adjustable with quick-release system. Suitable for lowered vehicles • Closed floor plate made of composite (honeycomb core plastic floor) consists of a honeycomb structure covered on both sides with a deck surface. Extremely light and robust. • 2 x central floor storage boxes, recessed into the loading area, offering the ideal storage option for heavy, bulky objects. Aluminum lids are included. • Electric winch, 12V with wireless remote control. 2,250 kg pulling force, with plastic rope and shackle hook. Powered by an onboard battery • Electro-hydraulic tilting function of the loading platform, can be tilted at the push of a button, for optimal loading angle • Central control unit for tilting function and tailgate, in addition to the wireless remote control. Includes battery level indicator for onboard battery • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO overrunning device and parking brake • Reverse drive automatic • Steel coupling head with integrated high-security lock, ALKO • Plastic mudguards • 13-pole plug • LED interior lighting with LED strip • Rear lights • Large, full-LED safety lighting • Side LED rear lights • LED work lights at the rear for better visibility during loading and unloading • Integrated fog light • Various boundary lights at the front, side and rear • Aluminum alloy wheels in anthracite • Heavy-duty support wheel • 5-year chassis warranty • 4 wheel lashing straps for securing over the wheel

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. Nedpfxjdy Hrds Aaxodc The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Year of manufacture: 2020 Empty weight: 2.525 kg Ndodpfeyy Ug Esx Aaxoc Please contact Kristoff Van Havere for more information - Push/pull leveler - Volvo quick coupler - Steering included - Wide 2650 mm or 3715 with opened side doors - Perfect condition

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK 2000 kg Electric Pallet Truck The CORMAK 2000 kg electric pallet truck is designed for horizontal pallet transportation in warehouses, wholesale facilities, and manufacturing plants. Its electric drive and lifting system reduce operator effort when moving loads weighing up to 2 tons. Key Benefits of the CORMAK 2000 kg Electric Pallet Truck Nedpfx Aao Aa Nyboxjdc - 2000 kg load capacity – enables the handling of heavy pallets containing materials, components, and finished products. - 850 W drive motor – allows loads to be transported without manually pulling or pushing the pallet truck. - 700 W lifting motor – enables electric fork lifting without manually pumping the tiller. - 1150 mm long forks with an overall width of 550 mm – suitable dimensions for handling EURO pallets. - 48 V battery power supply – allows goods to be transported without a power cable restricting the travel route. Design and Technology – Electric Drive and Wheel System The battery-powered pallet truck uses separate motors for driving and lifting. The travel speed is 4 km/h when loaded and 4.5 km/h when unloaded. The polyurethane wheel system includes a front wheel measuring 160 × 55 mm and rear rollers measuring 80 × 70 mm. The 1x/4 wheel configuration consists of one drive wheel and four load rollers. Operating Efficiency and Pallet Handling When fully lowered, the forks are positioned at a height of 80 mm, making it easier to insert them underneath a pallet. The maximum lifting height of 195 mm allows loads to be raised for transportation. The overall length of 1700 mm and width of 550 mm make it possible to account for the truck's dimensions when planning storage areas, loading stations, and transport routes. Applications – 2-Ton Electric Pallet Truck for Warehouses and Production Facilities The equipment is designed for transporting incoming deliveries, supplying production workstations, and transferring finished pallets to dispatch areas. The electric pallet truck is particularly suitable for repetitive transport operations where operators regularly pick up, move, and set down loads. Standard Equipment - Electric drive and lifting system. - Battery charger. - Electromagnetic brake. - 1150 mm long forks. Technical Specifications Load capacity 2000 kg Turning radius 1300 mm Raised fork height 195 mm Lowered fork height 80 mm Fork length 1150 mm Overall fork width 550 mm Wheel diameter Ø160 × 55 / Ø80 × 70 mm Battery voltage / rated capacity 48 V / 10 Ah (equivalent to 24 V / 20 Ah) Operating time on a fully charged battery Up to 3 hours Charging time Approx. 2.5 hours Brake Electromagnetic Travel speed, loaded / unloaded 4 / 4.5 km/h Maximum gradient, loaded / unloaded 6% / 10% Wheel material Polyurethane Weight 118 kg Dimensions 1700 × 550 × 1250 mm UDT inspection required No

Condition: new, The expansion of the new winch generation from Holzknecht, featuring the classic design with a cable drum installed transversely to the direction of travel, enables a large cable core diameter (resulting in low traction power loss), a wide cable drum, and, in conjunction with a cable winding arm, provides perfect cable spooling. - 6.5 tons pulling force at the drum core - 4.5 tons pulling force at the top cable layer - Electro-hydraulic control with self-contained oil supply - Optimal price-performance ratio - Standard equipment includes Holzknecht radio remote control "Autec" - Standard equipment includes tilt-stop system - Standard equipment includes hydraulic cable payout with cable infeed brake - Drive via bevel gearbox with reinforced duplex roller chain with load-switching safety clutch and automatic brake - Three-point frame made of welded steel construction (steel ST 52) - Shield width 1,750 mm - Folding protective grille - Low weight of 440 kg - Clean cable spooling due to cable distributor - Transversely mounted cable drum (in the cable direction) - Low cable infeed, height of the cable infeed roller 1,200 m - Incl. forestry cable 80m/11mm, highly compacted, Flemish eye with swivel hook Ndjds Adg Svepfx Aaxsc - Maximum cable capacity 100m/10mm or 85m/11mm - Incl. storage compartment, chainsaw & axe holder - Cable infeed speed 26 m/min - For tractors from approx. 30 kW Pulling force 6.5 tons Max. cable length 100m/10mm or 85m/11mm Cable infeed speed 26 m/min Shield width 1,750 mm Cable infeed height 1,200 mm Weight 440 kg For tractors from 30 kW Advantages of the hydraulic cable payout with cable infeed brake: 1. Cable payout at the push of a button 2. No overrun of the cable drum 3. Always cleanly spooled cable (even when lowering loads) 4. No cable pinching due to permanent pre-tension 5. Extreme reduction in workload 6. Extended cable life Radio remote control "Autec" - Functions: Pull, release, short release, throttle +/- , engine start & engine stop, switch for cable payout - Scope of supply: Transmitter incl. antenna, receiver, 230V+12V charger, hip belt for transmitter

Condition: new, The WARNER M-Track 1 gas control motor is a lead screw motor for stepless gas regulation in tractors and forestry machines with mechanical gas control. The lead screw is mechanically connected to the gas linkage or directly to the gas control lever on the injection pump, thus controlling the engine speed. The receiver of the forestry radio control system controls the travel of the lead screw by varying the length of the circuit. The extension or retraction of the lead screw is achieved by reversing the polarity of the control voltage by the receiver of the forestry radio control system. Operating voltage 12 V DC Current consumption Max. 3 A at 300 N Operating temperature -25° to +65° C Duty cycle 25% at 20°C (Thermal overload protection) Protection class IP 65 Stroke 50 mm (with limit switches) Push/pull force 440 N Max. static force Nedpe Adkubofx Aaxjdc 1350 N Speed 11 mm/sec Dimensions (W×H×D) (174×38×74) mm Axial distance Mounting hole 158 mm Color Black Material Aluminum with zinc alloy Weight Approx. 650 g Length of connection cable Approx. 350 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5650 operating hours. We specialize in importing and selling these Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Nedpfx Aajzumt Rjxedc Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid pump/mixer from 2021, which is a great match for this model and provides a practical set for small and medium-sized drilling projects. Ditch Witch FT5 – key data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg Option to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid pump. The stated price is net and applies to export and business customers. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price.

Year of construction: 2008, condition: ready for operation (used), A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement. Nedjzta D Hopfx Aaxjdc

Year of construction: 2014, condition: excellent (used), ANKELE 2 BAND CATERPILLAR BAP 375-70 1A Nedpfsu Skmwjx Aaxedc

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing Ndsdeu Sv Tcjpfx Aaxec -V-belt pulley: 3-groove pulley type SPA 355x3 -V-belt width: 13 mm -Mounting: Taper bushing Ø 48 mm (can be changed) -Dimensions: Ø 360 x 50 mm -Weight: 14 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing Ndedpfx Aju Sv T Neaxjc -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg

Condition: new, DEMAG traverses with rope pulleys for Ndodpfou U Nhvsx Aaxjc P Train / DR / MDR / DH

Condition: good (used), Year of construction: 2008, Two identical machines in stock Brand: GRAEWE GMBH Type of machine: Winder Model: EW 2700 Year of manufacturing: 2008 Ndedpsy N Sx Dofx Aaxjc Weight (kg): 2030 Voltage (V): 400V/50Hz

Condition: used, Transnorm Pneumatic Pusher 900-600-500 90° RA2092 Technical Specifications: External Dimensions of Mounting Frame: LxWxH=980x700x825 mm Maximum Product Width: 900 mm Maximum product height: 640 mm Maximum conveyor belt-frame width (NB): 600 mm Maximum conveyor belt-frame height (BH): 90 mm Support feet: available as an option Drive: Pneumatic cylinder Optionally available : Control system Prices net plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Njdpfx Asy R Hcgjaxjdc Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley Njdpfjw E Ip Dex Aaxsdc -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 25 mm -26 teeth: belt width 32 mm -Quantity: 4x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 50 mm -Weight: 0.3 kg/pcs

Condition: good (used), V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece Njdpfsw U Ty Eox Aaxedc

Condition: good (used), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinder puller, cylindrical grinder puller, dressing head, dressing head for grinding machines Nsdped R Ikdefx Aaxodc Quantity: 1 piece available -Dimensions: 325/130/H135 mm -Weight: 7.3 kg

Condition: used, Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. Njdpfx Aaoxmb Rhoxodc We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block, pulley cover -Manufacturer: Demag, Rope Pulley Cover Set -Type: unfortunately without a type designation Njdpoxd Th Tefx Aaxodc -Bore: Ø 50 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: Ø 278 x 60 mm -Weight: 2.8 kg

Condition: used, V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm Nedpod Ebpxjfx Aaxsdc -Weight: 17kg

Condition: good (used), Features: * Outfeed conveyor from the manufacturer KNAPP * Drive: Pneumatic Nodpedh Ur Sefx Aaxodc * Condition: Fully functional with signs of wear * Color: Black * Material: Steel * Professionally dismantled and packaged * Price per unit * Total quantity in stock: 6 units Technical data: Overall width: 530 mm Height: 580 mm Length of the boom: 590 mm Length of the mounting crossbar: 430 mm Stroke depth: 400 mm Width of the pusher: 400 mm Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic extenders for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or additional components such as picking shelves or containers.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40100 Main motor power: 45 kW Hydraulic system motor power: 2.2 kW Working rotor length: 1000 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 58 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing Nsdpfx Aaeq Sp Iboxjdc The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: used, Flat Pulley, Timing Pulley, Multi-Belt Pulley, Timing Pulley -Toothed pulley: Ø 256 mm -Type: D TB 56-14M-85 -Intake: Taperbush Tecnamic 3525-48 / Ø 48 x 65 mm -56 teeth: belt width 85 mm -Dimensions: Ø 256 x 103 mm -Weight: 25 kg Ndedpfx Aemxpuzjaxec