Used Cefla Typ.: Tn for sale (2,880)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Lrsdpfx Akjyxr T Toujl Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, Year of construction: 1979, roll diameter 420 mm throat 410 mm saw band length 3150 - 3260 mm saw band width 3-16 Ledpfx Akevg R U Hjuorl weight ca. 600 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm Ledpey Twfwofx Akusrl workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: new, Year of construction: 2026, functionality: fully functional, The belt conveyor, TYPE: NPS, is for sale. You can order it in various lengths and usable widths. Ledelkda Hepfx Akujrl - High-quality aluminum profile, anodized, with grooves - Without guide plates - Smooth PU conveyor belt, temperature-resistant from -10°C to +90°C - Mobile undercarriage, adjustable from 900 - 1300 mm - Worm gear motor 3 x 400 V 50 Hz - Constant belt speed, approx. 6.0 m/min - Motor protection switch with 5 m cable & CEE plug

Condition: new, Year of construction: 2026, clamping range J) 50- 115 mm clamping range A) 170- 260 mm Ledpfxsy Tbhvo Akusrl internal diameter 110 mm external diameter 176 mm weight 3,3 kg Unused jaw turning ring - switchable jaws for bigger clamping range - mainly for chucks up to Ø 250 mm

Condition: used, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2008, next inspection (TÜV): 04/2026, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Langendorf internal loader for glass (Vehicle 103) First registration: June 24, 2008 Type SGL 5 Permissible total weight 39,000 kg Unladen weight 9,500 kg Payload 29,500 kg Overall length 13,600 mm Overall width 9,500 mm Overall height 4,000 mm 9 m internal length TÜV (technical inspection) valid until 04/2026, SP (safety inspection) valid until 10/2026 Storage compartments on the side Air suspension With emergency running system for foldable wheel suspensions BPW disc brakes Tires 385/65R22.5, front: approx. 60/60%, 2nd: approx. 70/70%, 3rd: approx. 80/80% Lrjdpfoyy Exxox Akujl Axle load 9,000 kg each WABCO ABS Fixed front bulkhead Curtain closure on driver's side + passenger side at the front Fixed gate at the rear 2 x drop-down supports Hydraulic supports inside Hydro Push system Ferry lashing: 1 x on the front left and right on the frame + 1 x on the left and right at the rear bottom Fixed gate at the rear Various storage options on the side Price: €11,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €5,000.00 is the Ludwigslust local court; for disputes exceeding this amount, it is the Schwerin regional court. Subject to errors, typos, and prior sale.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Lrjdjy T Hn Uopfx Akuel Option: External blowing air Kinematics: Fork head

Condition: used, maximum load weight: 26,260 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 11/1992, loading space length: 6,700 mm, * Schmidt container tipping chassis, type CKSA 10/22-20 * First registration: 1992 * Tare weight: 4,740 kg * Payload: 26,260 kg Ljdpfx Aey T Tz Uekujrl * SAF axles * Air suspension * Locking mechanism for 20-foot containers * Overall length: 7.80 m * Loading area: 6.70 m

Condition: used, Year of construction: 2018, Stock no. 5823 Remav Mobile Screening Plant Type SB/2800 ---- * Manufacturer: Remav * Model: SB/2800 * Color: Blue * Year of manufacture: 2018 * Own weight approx. 1,800 kg - 2,100 kg * Screening area approx. 4.3 m² * Feed height approx. 2.10 m * Feed width approx. 2.75 m * Transport length approx. 3.00 m * Maximum permissible bucket width up to 2.70 m * Electric drive with connection 400V / 16A * Motor power approx. 1.96 - 2.0 kW * 2-deck screen construction * Possible fine screening down to 4-6 mm Ledey Sq T Ejpfx Akuorl * Integrated forklift pockets / crane lifting eyes Notice regarding possible errors in this advertisement: Despite careful preparation, occasional errors may occur in the text or specifications. We accept no liability for mistakes, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, NEW Description: - Crosscut and miter saw with maximum cutting height of 135 mm - Machines can be mitered in 2 levels - Stable gray cast iron construction - Precise ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Readjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to the extraction system Scope of delivery: Crosscut and miter saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm Lredovwf T Sjpfx Akujl - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm - Extractor nozzle diameter: 100 mm - Weight: 100 kg

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Lrsdpfx Asvwf Rdekusl

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motorTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Lsdsvwf N Tepfx Akuorl

Condition: excellent (used), Container roller set, container rollers for moving standard containers, Haacon, 16 t load capacity – used: Price ex location: €7,500 (net) Manufacturer: Haacon Type: 4336.16-231720 Year of manufacture: 2022 Serial number: 1074982-01-00-001-51 Component number: 215993 Load per set (4 units): 160 kN Load per unit: 60 kN Rolling speed: max. 6 km/h Container rollers for moving standard containers Steering bar for handling the roller when dismantled and for auxiliary steering with parking brake Roller set consisting of drawbar, four swivel castors, lockable in travel direction Ljdpfx Asyr Hgyskujrl Rolling operation up to 6 km/h Original price: €9,907 Available: immediately Condition: as new – used only approx. 3 times Location: 79183 Waldkirch

Condition: excellent (used), 113 sets, pallet collars type 65, Cordes, ideal for stacking goods on Euro pallets - second-hand : Price per piece blue pallet collars (net): only 45.-€ Price per piece in galvanized quality (net): only 55.-€ Manufacturer: Cordes Type: Pallet extension type 65 Year of manufacture: unknown With hook connection for pallet dimensions 1200 x 800mm Ljdpfx Aker Imatjuorl Usable height; 800mm 800mm high 800mm wide Load capacity: 1.500kg Dead weight per set approx. 22kg 4 stacking plates for safe stacking collapsible New price: approx. 150.-€ Quantities available: 29 sets in galvanized and 84 sets in blue Condition: very good Available: immediately Location: 74080 Heilbronn

Year of construction: 2015, condition: ready for operation (used), Cleaning system is fully functional. Ljdpfjy Txckjx Akuorl Usable dimensions: Diameter 800mm, usable height 700mm. Tank volume: 500L. Options: Sludge drain Steam extraction Oil skimmer separator Magnet rod for metallic particles Volumetric chemical dosing Bag filter

Condition: new, mileage: 100 km, power: 157 kW (213.46 HP), fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, Equipment: air conditioning, * 1 Air conditioning system * 1 Lane change warning system * 1 Chassis color: anthracite gray * 1 Cab color: E1980 crystal white * 1 Headlights and bumpers: Stone Grey * 1 Cab steps and fenders: Stone Grey * 1 Wheel trims: silver-gray * 1 Goodyear tires * 1 Tire pressure monitoring system * 1 Front axle(s): 215/75R17.5 * 1 Driven rear axle(s): 215/75R17.5 * 1 Without spare tire * 1 Steel wheels, silver-gray * 1 Pneumatic steering column lock * 1 Soft-grip steering wheel, black * 1 Sunroof with manual operation * 1 Driver's seat: air-suspended luxury driver's seat * 1 Double passenger bench seat, velour upholstery * 1 Converter 24 V to 12 V, 15 A, 180 W * 1 Emission class: Euro 6 * 1 Manual gearbox, 6 gears * 1 Rear axle ratio: 3.73 * 1 Mechanical differential lock * 1 Traction control system (ASR) * 1 6-speed manual gearbox 6S800 OD, 6.58-0.78 * 1 Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * 1 Wheelbase 3.15 m / rear overhang 1.32 m * 1 Standard component arrangement * 1 AdBlue tank 30 l, right side of chassis * 1 Fuel tank, left side * 1 AdBlue tank filler neck without lock * 1 Rear underrun protection * 1 Rear lights with incandescent bulbs * 1 Battery box, left side, without spare wheel mount * 1 Longitudinal member 210/4.5 mm, without internal reinforcement * 1 EAS unit, right side, outlet in the middle * 1 Plastic fuel tank, 110 l * 1 Maximum ambient temperature: 38 degrees * 1 Temperate climate * 1 Air intake above, behind the cab Lrjdpfx Asx Egtfokuol * 1 Water separator, heated * 1 Body mounting method: BAM 1, bracket type B * 1 Fixed connector. Cab front * 1 Tail lift application * 1 Use with drawbar, type plate, up to max. permissible total weight * 1 Pneumatic connection for trailer, swivel coupling * 1 Cross member D85-Dc70-V25 ball coupling D85, mounted * 1 Electrical connection for trailer 24V/2x7-pole + 12 V * 1 GVWR (Gross Vehicle Weight) chassis weight max. 7500 kg * 1 Max. permissible total weight, drive unit: 18000 kg * 1 First gearbox auxiliary drive: N./4c-U-32/25 * 1 Exhaust brake * 1 Parking brake actuation with test position * 1 Reversing warning system * 1 Basic immobilizer * 1 Hill start assist * 1 DAF Side and Turn Assist * 1 Alcohol interlock, prepared * 1 Electronic stability program (ESP/VSC) * 1 Speed limit recognition * 1 DAF Drowsiness Detection * 1 Rubber cab suspension, mechanical * 1 Day cab * 1 Green tinted windows * 1 Side not glazed / rear single glazed * 1 5 mirrors * 1 Electrically adjustable mirrors * 1 Mirror mounts, body height 2.50 - 2.60 m * 1 Exterior sun visor, green, translucent * 1 Headlight beam for right-hand traffic * 1 Rear view camera * 1 Halogen headlights with height adjustment * 1 Adaptive Cruise Control with FCW and AEBS-3 * 1 Digital tachograph, VDO 1C, version G2V2 * 1 Speed limiter setting 85 km/h nominal * 1 PACCAR Connect * 1 Antennas: AM/FM + GSM + GPS * 1 FMS connection, prepared * 1 DAF Infotainment System: DAB radio with speakers * 1 Front axle: 3.60 t, parabolic, raised, HD, F36 * 1 Rear axle: 5.00 t, parabolic, raised, SR 5.14 * 1 Front axle 1, 3,200 kg, load capacity index 124 * 1 Rear axle 1, 5000 kg, load capacity index 116 * 1 Generator 100 A, batteries 2x 125 Ah * 1 Garantie Plus - Powertrain - 3 years - 200,000 km * 1 Meiller DSK Type 3, design 11 * 1 Plug-in storage rack as bulkhead extension * 1 Side marker lights

Condition: new, mileage: 100 km, power: 157 kW (213.46 HP), fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, Equipment: air conditioning, * 1 Air conditioning system * 1 Lane change warning system * 1 Chassis color: anthracite gray * 1 Cab color: E1980 crystal white * 1 Headlights and bumper: Stone Grey * 1 Cab steps and fenders: Stone Grey * 1 Wheel trims: silver-gray * 1 Goodyear tires * 1 Tire pressure monitoring system * 1 Front axle(s): 215/75R17.5 * 1 Driven rear axle(s): 215/75R17.5 * 1 Without spare tire * 1 Steel wheels, silver-gray * 1 Pneumatic steering column lock * 1 Soft-grip steering wheel, black * 1 Sunroof with manual operation * 1 Driver's seat: air-suspended luxury driver's seat * 1 Passenger double seat bench, velour upholstery * 1 Converter 24 V to 12 V, 15 A, 180 W * 1 Emission standard: Euro 6 * 1 Manual transmission, 6 gears * 1 Rear axle ratio: 3.73 * 1 Mechanical differential lock * 1 Traction control system (ASR) * 1 6-speed manual transmission 6S800 OD, 6.58-0.78 * 1 Engine: PX-5, 153 kW/208 hp. Cab emblem: 210 * 1 Wheelbase: 3.15 m / rear overhang: 1.32 m * 1 Standard component configuration * 1 AdBlue tank 30 l, right chassis side * 1 Fuel tank, left * 1 AdBlue tank filler cap, without lock * 1 Rear underrun protection * 1 Rear lights with incandescent lamps * 1 Battery box, left, no spare wheel holder * 1 Longitudinal member 210/4.5 mm, without internal reinforcement * 1 EAS unit, right, outlet in the center * 1 Fuel tank made of plastic, 110 l * 1 Maximum ambient temperature: 38 degrees * 1 Temperate climate * 1 Air intake at the top, behind the cab * 1 Water separator, heated * 1 Body mounting method: BAM 1, bracket type B * 1 Fixed connector, front of cab * 1 Tail lift application * 1 Application with drawbar, type plate, up to max. GVWR * 1 Pneumatic connection for trailer, swivel coupling * 1 Cross member D85-Dc70-V25 ball coupling D85, mounted * 1 Electrical connection for trailer: 24V/2x7-pole + 12 V * 1 GVWR chassis weight max. 7500 kg * 1 Max. total towing weight: 18000 kg * 1 First transmission PTO: N./4c-U-32/25 * 1 Exhaust brake * 1 Parking brake actuation with test position * 1 Reversing warning system * 1 Basic immobilizer * 1 Hill start assist * 1 DAF Side and Turn Assist * 1 Alcohol interlock, prepared * 1 Electronic Stability Control (VSC) * 1 Speed limit recognition * 1 DAF Drowsiness Detection * 1 Rubber cab suspension, mechanical * 1 Short cab * 1 Green tinted windows * 1 Side not glazed / rear simply glazed * 1 5 mirrors * 1 Electrically adjustable mirrors * 1 Mirror mounts, body height 2.50 - 2.60 m * 1 External sun visor, green, translucent * 1 Headlight beam for right-hand traffic * 1 Rear view camera * 1 Halogen headlights with height adjustment * 1 Adaptive Cruise Control with FCW and AEBS-3 * 1 Digital tachograph, VDO 1C, version G2V2 * 1 Speed limiter setting: 85 km/h nominal * 1 PACCAR Connect * 1 Antennas: AM/FM + GSM + GPS * 1 FMS connection, prepared * 1 DAF Infotainment System: DAB radio with speakers * 1 Front: 3.60 t, parabolic, raised, HD, F36 * 1 Rear axle: 5.00 t, parabolic, raised, SR 5.14 * 1 Front axle 1, 3,200 kg, load index 124 * 1 Rear axle 1, 5000 kg, load index 116 * 1 Generator 100 A, batteries 2x 125 Ah * 1 Guarantee Plus - Powertrain - 3 years - 200,000 km Lsdsx Egr Uspfx Akuerl * 1 Meiller DSK Type 3, model 11 * 1 Plug-in storage rack as a bulkhead extension * 1 Side marker lights

Condition: new, mileage: 100 km, power: 157 kW (213.46 HP), fuel type: diesel, overall weight: 7,500 kg, gearing type: mechanical, number of seats: 2, loading space length: 4,200 mm, Equipment: ABS, air conditioning, soot filter, * 1 Air conditioning system * 1 Lane change warning system * 1 Chassis color: Anthracite gray * 1 Cab color: E1980 Crystal White * 1 Headlights and bumpers: Stone Gray * 1 Cab steps and fenders: Stone Gray * 1 Wheel trims: Silver-gray * 1 Goodyear tires * 1 Tire pressure monitoring system * 1 Front axle: 215/75R17.5 * 1 Driven rear axle: 215/75R17.5 * 1 Without spare tire * 1 Steel wheels, silver-gray * 1 Pneumatic steering column lock * 1 Easy-grip steering wheel, color: black * 1 Sunroof with manual operation * 1 Driver's seat: Air-sprung luxury driver's seat * 1 Passenger double bench seat, velour upholstery * 1 Converter 24 V to 12 V, 15 A, 180 W * 1 Emission class: Euro 6 * 1 Manual transmission, 6 gears * 1 Rear axle ratio: 3.73 * 1 Mechanical differential lock * 1 Traction control system (ASR) * 1 6-speed manual transmission 6S800 OD, 6.58-0.78 * 1 Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * 1 Wheelbase 3.15 m / rear overhang 1.32 m * 1 Standard component arrangement * 1 AdBlue tank 30 l, right side of the chassis * 1 Fuel tank on the left * 1 AdBlue tank filler cap without lock * 1 Rear underrun protection * 1 Tail lights with incandescent bulbs * 1 Battery box on the left, no spare wheel mount * 1 Longitudinal member 210/4.5 mm, without internal reinforcement * 1 EAS unit on the right, outlet in the center * 1 Plastic fuel tank, 110 l * 1 Maximum ambient temperature: 38 degrees * 1 Temperate climate * 1 Air intake at the top, behind the cab * 1 Water separator, heated * 1 Body mounting method: BAM 1, bracket type B Ledpfx Aox Egr Iekusrl * 1 Fixed connector. Cab front * 1 Tail lift application * 1 Use with drawbar, type plate, up to max. GVWR * 1 Pneumatic connection for trailer, swivel coupling * 1 Transverse D85-Dc70-V25 ball coupling D85, mounted * 1 Electrical connection for trailer 24V/2x7-pole + 12 V * 1 GVWR chassis weight max. 7500 kg * 1 Max. gross train weight drive unit 18000 kg * 1 First transmission auxiliary drive N./4c-U-32/25 * 1 Exhaust brake * 1 Parking brake actuation with test position * 1 Reversing warning system * 1 Basic immobilizer * 1 Hill start assist * 1 DAF Side and Turn Assist * 1 Alcohol interlock, prepared * 1 Electronic Stability Control (VSC) * 1 Speed limit recognition * 1 DAF Drowsiness Detection * 1 Rubber cab suspension, mechanical * 1 Short cab * 1 Green tinted windows * 1 Side not glazed / rear single glazed * 1 5 mirrors * 1 Electrically adjustable mirrors * 1 Mirror mounts, superstructure 2.50 - 2.60 m * 1 Exterior sun visor green, light-transmitting * 1 Headlight beam pattern for right-hand traffic * 1 Rear view camera * 1 Halogen headlights with height adjustment * 1 Adaptive Cruise Control with FCW and AEBS-3 * 1 Digital tachograph, VDO 1C, Version G2V2 * 1 Speed limiter setting 85 km/h nominal * 1 PACCAR Connect * 1 Antennas: AM/FM + GSM + GPS * 1 FMS connection, prepared * 1 DAF Infotainment System: DAB radio with speakers * 1 Front: 3.60 t, parabolic, raised, HD, F36 * 1 Rear axle: 5.00 t, parabolic, raised, SR 5.14 * 1 Front axle 1, 3,200 kg, load capacity index 124 * 1 Rear axle 1, 5,000 kg, load capacity index 116 * 1 Generator 100 A, batteries 2x 125 Ah * 1 Guarantee Plus - Powertrain - 3 years - 200,000 km * 1 Meiller DSK Type 3, model 11 * 1 Plug-in storage rack as front wall attachment * 1 Side marker lights

Condition: not inspected (used), functionality: unexamined, Year of construction: 2000, power: 315 kW (428.28 HP), overall weight: 3,000 kg, input voltage: 400 V, type of input current: three-phase, machine/vehicle number: Expander Typ OEE 23,2 315KW, Used expander/extruder, versatile, can be used with both hydraulic counterpressure slide and dies (shaping e.g. for animal feed) Machine was purchased, unfortunately cannot be used because our power connection is not sufficient. Available: expander extruder with gear and drive, hydraulic slide (cone not plate), rotary knife and various dies, hydraulic unit with oil cooler. Lrsdpfxjvlwchj Akujl If required, the associated belt dryer is also available. Please send inquiries by email, thank you.

Condition: new, Fimotec-Fischer Type FR 13 frequency inverter, serial number: 42496 with cable - length: 1.80m, unused, 100% functional, delivery as shown in the photos. Lredpfx Ajy Srnqokuel

Condition: excellent (used), DEMAG Chain Hoist Type Pk 2 N-F Lifting speeds: 10 and 2.5 m/min. 380 Volt 0.5 kW Travel drive: Lredsy Sldlepfx Akujl 380 Volt 0.5 kW

Condition: good (used), Year of construction: 1986, functionality: fully functional, Precision surface grinder Degen Type FSHQV300 with digital display Technical data and features: >> Year of manufacture 1986 Lrodpfey S Ailsx Akuel >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Manual magnetic chuck 300 x 150 mm x 80 mm >> Rapid traverse in the feed direction >> Magnetic chuck >> Total power requirement 2.0 kW >> Space requirement length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: A precision surface grinder from the German manufacturer Willy Degen, type FSHQV300, is offered for sale. It can be used for surface grinding or plunge grinding with automatic feed. The feed dimension is entered via the digital display. This is a German-made product with high precision and represents a top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), 1. DEMAG drum brake Type: TH806/60 - RT315 TH806 1 piece available. Ljdpou Uvmfjfx Akuerl 2. ELDRO electrohydraulic lifting device Ed 1250/60

Condition: used, mileage: 316,939 km, power: 132 kW (179.47 HP), first registration: 08/2010, overall weight: 8,600 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater, Body: - Küpper Weisser spreader - Model: STASF VES, year 2010 - ThermoMAT - Suitable for oil spill control - Storage boxes Equipment: - Cab: C (Compact) - Driver and passenger comfort seats, air-suspended - Automatic climate control - Additional air heater Eberspächer Airtronic D2 - Mechanical sunroof - Flame start system - Fuel tank: 200 L - 6-speed manual transmission Technology: - Rear-view camera - On-board computer MAN-Tronic - Electrically adjustable and heated exterior mirrors - Electric windows - ETA circuit breaker - Beacon lights Safety/Environment: - Rear axle differential lock Lodpfxewmx Aqo Akujrl - Engine brake - Electronic braking system MAN-Brakematic - Rear axle stabilizer - EURO 5 engine Miscellaneous: - German first delivery - 1 previous owner - Engine 4.6 L – 132 kW Diesel - Registration: previously self-propelled working machine 'traffic safety vehicle' - Payload 2,785 kg according to registration certificate - Perm. total weight 8.60 t Since 1972, your reliable partner for all automotive and commercial vehicle needs in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction equipment is welcome. If a new TÜV inspection is desired, we will gladly offer you this service through our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged nationwide by our external partners at an additional cost. All information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical errors and data transmission mistakes. Listed equipment features may need to be verified separately. Subject to errors and prior sale.

Condition: used, Year of construction: 2009, rapid traverse X-axis: 32 m/min, total height: 2,250 mm, total length: 4,295 mm, total width: 2,575 mm, overall weight: 8,800 kg, POS PosMill Typ 1100 3-axis CNC milling machineVertical CNC machining center with a machine table size of approx. 1,050 x 600 mm.Equipped with a HEIDENHAIN TNC 430 CNC control.Automatic tool changer.Equipment: cooling system with through-spindle coolant (IKZ), hydraulic system, and chip conveyor. Travel Y-axis: 600 - mm Dimensions of the clamping surface: 1050 x 600 mm Rapid traverse: 32 m/min Travel Z-axis: 510 - mm Travel X-axis: 1100 - mm Dimensions (LxWxH) approx.: 4295 x 2575 x 2250 mm Weight approx.: 8,800 kg Control: HEIDENHAIN (TNC-Serie) Grinding spindle speed: 10000 - rpm Year of construction: 2,009 Condition: in working order Terms of payment: 100% prepayment before pick-up Lrsdoy S Nifepfx Akuol Terms of delivery: From foundation under power: Yes