Used Cincinnati Proton Single-Screw Extruder 60-30 Cincinnati for sale (49,556)

Condition: refurbished (used), PRICE ON REQUEST! > used & tested completely overhauled, all wear parts replaced - completely measured - gear play Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - central hand newly adjusted - endurance test for 8 hours at 100% load - delivery in a special box (insured shipping) - central hand in exchange (without exchange on request) - gearbox overhaul of axes 1-6 - 12 months warranty - 18 months possible for an additional charge MORE than 100 central hands in stock immediately, various models. Just ask! An express overhaul of your KUKA central hand is also possible – 48-72 hours from delivery. Njdpfx Amog A Itqexscw In addition, we also offer the repair of ABB wrist units.

Year of construction: 2021, condition: new, PRICE ON REQUEST! - NEW - unused - completely measured Nsdpsg A Ivdefx Amxocw - Gear backlash: Axis 4 - 0.005 WM Axis 5 - 0.005 WM Axis 6 - 0.005 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand as an exchange unit (without exchange on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional charge MORE than 100 central hands in stock immediately, various models. Just ask! Express overhaul of your KUKA central hand is also possible - from delivery, 48-72 hours. In addition, we also offer the repair of ABB wrist units.

Condition: used, capping head for BVS 30 x 60 price / pcs. Nedpfxjx Iv S Se Amxecw short or long shaft

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Nsdpfxjx Hifvs Amxocw

Condition: used, Thrust: 400 TON. Ncsdpoq N Er Djfx Amxjw Barbed points: no. 2 Model: AF 400 MB 30-60 Year of construction: 1992 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 82 ton.

Condition: used, Thrust: 600 TON. Barbed points: no. 2 Ncjdpfx Aoq N Ettsmxjw Model: AF 600 MB 30-60 Year of construction: 1994 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 110 ton.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Nedpfx Ameh Nypfexscw

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Nsdpfx Amjhtvmhexocw

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Ncjdpfxow Hy Uuo Amxew

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Ncodpsxp Rgkefx Amxow Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Ncjdpfx Amjyhd Dbjxew Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Ncedpfxexzynuj Amxsw

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm Nsdpfx Amsyg Eghjxecw The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: excellent (used), Year of construction: 2006, GRASSAIR RLR 30 V8 SCREW COMPRESSOR ATLAS COPCO SCREW STAGE, VARIABLE SPEED (INVERTER CONTROL), WITH REFRIGERANT DRYER, 22 KW MOTOR, CAPACITY 3.90 m3/min, PRESSURE 10 BAR. YEAR 2006 MACHINE IS FULLY OPERATIONAL. Ncodpfx Ajgfb Hcemxsw WE HAVE A LARGER QUANTITY OF SCREW COMPRESSORS AND DRYERS, AS WELL AS WELDING EQUIPMENT, AVAILABLE FOR SALE.

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Nodsw Snlwjpfx Amxscw • Water Cooled 130kW AC Motor and Drive. – Low Noise

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,300 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, table load: 1,000 kg, spindle speed (max.): 9,000 rpm, number of axes: 3, This 3-axis Cincinnati MAG CFV1300i was manufactured in 2010. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 540 mm, and Z-axis travel of 720 mm. The machine includes a maximum table load of 1000 kg and a maximum spindle speed of 9000 rpm. If you are looking to get high-quality machining capabilities, consider the Cincinnati MAG CFV1300i vertical machining centre we have for sale. Contact us for further details. • Internal cooling: yes Ncjdpfxozkriis Amxew • Number of places in the magazine: 24 • Accessories sold with the machine: 4 pcs of hydraulic vices • Accessories sold with the machine: tool holders approx. 24 pcs SK 40, both used • Latest replacements/investments/repairs: new spindle + replacement of backup battery in 02/2026

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EG4030-i4, Eccentricity measuring device for cross-sections from 30 to 300 mm². Nedpfxszg H S Ds Amxjcw

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Ncedpfx Asxvwcxsmxjw Table Loading Capacity: 1.1(ton)

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Ncsdpfx Ajy Rnrijmxew Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Ncjdpfx Aey Rnqfemxjw Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction Ncedoftm Hrepfx Amxjw - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : Nedpfx Aeg Ezaremxscw 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 42 kW (57.10 HP), inner dimension length: 3,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 4,033 mm, total width: 1,800 mm, total height: 2,553 mm, fuel type: electric, Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Made-to-order manufacturing ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Coating Oven with Electric Heating – MATOVENB-151830 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Efficient ☘️ Powerful ☘️ Professional Curing ✅ Electrically heated powder coating oven ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at the end of the curing time ✅ Insulated door with special locking system ✅ Stable sandwich panel construction with strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shutdown after process completion ✅ Can be used with a mobile workpiece trolley ✅ Optionally with insert shelf system for small series ♨️ Also available as a high-temperature version up to 500°C. ⚡ Depending on the model/project, also available with electric, gas or diesel heating. ➖➖➖➖➖ Technical features: ✔️ Model: MATOVENB-151830 ✔️ Internal and external dimensions: see technical drawing in the image gallery ✔️ Electrical heating power: 42 kW ✔️ Fan capacity: 3,000 m³/h ✔️ Circulation fan: 1.50 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power: approx. 45 kW ±10 % ✔️ Digital temperature control ✔️ Temperature continuously adjustable up to 220°C ✔️ Inside: 1.2 mm galvanized steel ✔️ Outside: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 piece Njdpjiiwa Dsfx Amxjcw Other MATOVENB powder coating ovens in various sizes are available. Dimensions and technical data of the other models can be found in the attached catalog. ➖➖➖➖➖ ⚙️ Optional control functions ✅ PID control for precise temperature control ✅ Touchscreen control panel and smartphone control ✅ Ramp heating mode for defined temperature profiles ✅ Storage of process parameters ✅ Weekly and monthly reports at the touch of a button ➖➖➖➖➖ 🛡️ Safety and process control Safety sensor to prevent overheating Automatic shutdown in case of a fault Acoustic warning signals in case of errors Smoke extraction via automatic ventilation ➖➖➖➖➖ ♨️ Ramp heating mode (optional) Control the temperature profile and holding times precisely: • Reach the target temperature in a defined time • Maintain the desired time • Controlled cooling down to the target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire purchase or installment payment options. ➖➖➖➖➖ Special sizes or individual designs are possible upon request. We will gladly plan a suitable solution for your workshop. Inquire now – make your company fit for professional powder coating!

Year of construction: 2017, condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW year 2017 Nedjrupr Dopfx Amxjcw price: 4.950 € contact: Mr. Rainer Eckerle

Condition: used, functionality: fully functional, Knuckle joint / coining presses CINCINNATI HME K-360 tons (3 units) K-600 tons (1 unit) Cincinnati HME K360 360 Tons capacity Stroke 2.125" Speed 90-200 SPM Main Motor 22 kW Ncjdeypathjpfx Amxow Maximum Coin Diameter 34 mm Maximum Coin Thickness 3.5 mm Cincinnati HME K600 600 Ton Capacity, 4.5'' Stroke, 25 Strokes per min, 17.5'' Shut Height (SDAU), 9/16'' Top Tool Adjustment