Used Circulating Pump Twin Pump for sale (12,051)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW Ijdpfx Asxmrwfsbyjtk • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Iedeiu U Txopfx Abyetk Domestic hot water systems water supply systems industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11

Condition: like new (used), Chemical pump, slurry pump, chemical industrial centrifugal pump, used machine with explosion-proof motor Manufacturer: CEMP International -type: Bredel HOSE Pumps SP/32 -inclusion size: 1210x670x840mm -stump size: DN50 Iedpfx Aettvtvsbyjtk -electrical data: 400V; 6.3A

Condition: good (used), Year of construction: 1999, functionality: fully functional, cutting length (max.): 6,250 mm, feed length X-axis: 6,250 mm, saw blade diameter: 500 mm, total length: 7,000 mm, total width: 1,100 mm, saw blade speed: 2,820 rpm, input voltage: 400 V, overall weight: 1,910 kg, For sale is an Emmegi Twin Electra Sun double miter saw in good, functional condition. The machine is ideal for the precise processing of aluminum, plastic, and similar profiles. Thanks to the programmable control system and numerous stored programs, it is well-suited for both individual custom pieces and series production. Technical data: * Manufacturer: Emmegi * Model: Twin Electra Sun * Year of manufacture: 1999 * Cutting length range: 350 to 6,250 mm * Double miter saw with automatic positioning * Various programs can be stored or are already available * Suitable for precise 90° and miter cuts Iodpfx Abeztkbvsyotk The machine is in a ready-to-use condition and can be inspected and tested by appointment. Price: Negotiable

Condition: excellent (used), Huber Unichiller 060Tw water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Equipment type: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: up to 6 kW Offered is a used Huber Unichiller 060Tw with a water-cooled refrigeration unit and Pilot ONE touchscreen control. The unit is designed for the precise cooling and temperature control of external closed circuits and is suitable for applications such as process cooling, machine cooling, laboratory applications, chemical processes, and technical and industrial systems. Technical data: Temperature range: -20 to +40 °C Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Cooling capacity at +15 °C: 6.0 kW Cooling capacity at 0 °C: 5.0 kW Cooling capacity at -10 °C: 3.1 kW Cooling capacity at -20 °C: 1.7 kW Power connection: 460 V / 3 phases / 60 Hz Max. current draw according to nameplate: 6.7 A Refrigerant: R507 Refrigerant charge: 1.2 kg Max. pressure: 25 bar CFC- and HCFC-free Circulating pump: C3 Max. flow rate: 122 l/min Max. delivery pressure: 5.6 bar Pump connection: G1 1/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption: approx. 70 to 330 l/h, depending on the inlet temperature Min. fill volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Control: Huber Pilot ONE controller 5.7" color touchscreen Graphical temperature display Program and ramp functions Ijdpfx Ajzui Uqobyotk Digital level indicator Multilingual user interface Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Dimensions: Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Net weight: approx. 213 kg Equipment: Water-cooled refrigeration unit C3 circulating pump Pilot ONE touchscreen controller Stainless steel housing Stainless steel circulating pump Atmospherically open expansion tank Copper-brazed evaporator Digital level gauge Main switch Ethernet, USB, and RS232 interfaces Pt100 connection Cooling water and process connections Castors Connection hoses as shown in the pictures Shipping data: Dimensions: approx. 600 × 600 × 1450 mm Weight: approx. 213 kg net Shipping by freight forwarder possible. Scope of delivery: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures. Condition: Used. Optical condition as shown in the pictures. The unit is available upon agreement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature Itjdjztl R Sjpfx Abyok • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27678 Manufacturer: Leistritz Type: ZSE 27 MAXX Year of manufacture: 2007 Screw diameter: 2 x Ø 27.0 mm L/D: 40D Drive: 33.6 kW Iodpfx Abet Eqvdsystk Details: Co-rotating, segmented screws and barrels, 1 x atmospheric degassing, 1 x vacuum degassing including vacuum pump Options: Granulation, dosing, side feeder This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Condition: used, Year of construction: 1988, functionality: fully functional, The machine is completely overhauled with new electrics, new cabling, incl. new SIEMENS Sinumerik 840D control system Technical data: Working range - max. circulation and turning diameter 2,000 mm Iedpfsu R H I Usx Abyjtk - Max. turning height 1,500 mm - Face plate diameter 1,600 mm - max. face plate load 11,200 kg - Chisel slide travel (vertical) 1,000 mm Smallest plunge diameter of the chisel slide 325 mm Chisel slide cross-section 250 x 210 mm - Drive power of the main motor 71 kW - Crossbeam adjustment 1,170 mm - Crossbeam support from center of face plate to the right 1,170 mm - From the center of the faceplate to the left 25 mm - Magazine positions 12 pcs. - Tool changer Speed: - Speeds - faceplate - ram and support hydrostatically guided 2.5-250 min-1 Page -2- Feed rate - X and Z 0.1 1000 mm/min - Rapid traverse X and Z 6 m/min - Weight approx. 22,000 kg - Voltage 400 V 50 Hz - Connected load 175 kW - Space requirement L = 10,000 mm W = 6,000 mm H = 5,850 mm Accessories: - Chip conveyor - Housing - 2 hinged front doors - Cooling system incl. tank and pump Dimensions: - Weight of the machine 22 to. - Machine dimensions L/W/H 10,000 x 6,000 x 5,800 mm

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Year of production: 2007. Counter: 145 million Full service contract. When purchased together with the Kern 2600, an attractive price for the machines can be negotiated. Itsdpfx Abjxfwfxsyjk I have 2 machines for sale with this configuration.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 920 kW (1,250.85 HP), overall weight: 3,465 kg, total width: 1,281 mm, total length: 2,606 mm, total height: 1,595 mm, pressure: 6 bar, nominal heat output: 920 kW (1,250.85 HP), temperature: 183 °C, tank capacity: 801 l, fuel: liquefied natural gas (LNG), operating pressure: 6 bar, Equipment: documentation/manual, For Sale: Full working and complete Industrial Gas Boiler System Buderus Logano GE615 – 920 kW | 2023 | Excellent Condition High-performance industrial heating system for sale, commissioned at the end of 2023 and operated for only two heating seasons (2023/2024 and 2024/2025). The system is currently fully operational and can be inspected and tested under working conditions. Sold as it is with all the hardware including stainless steel chimney, electrical distribution panel and complete interior fittings included in the price. The installation was professionally executed and regularly maintained. The system is in excellent technical condition with no leaks, corrosion, or structural defects. The boiler can be adapted for alternative fuel operation (e.g. LPG or oil) subject to burner configuration and technical adjustment. Main Configuration: Boiler Buderus Logano GE615 – 920 kW Nominal output: 821 – 920 kW Number of sections: 13 Flue gas temperature: 139 – 183 °C Length: 2606 mm Width: 1281 mm Height (without control unit): 1595 mm Flue connection: 360 mm Weight: 3465 kg Burner: *Weishaupt VW-G 10/4-AZM Gas Burner Control System: *Bosch CC8311 Control Unit Circulation Pumps: *2 × Wilo Yonos MAXO 80/0.5-12 Technical Specifications: Type: Industrial cast iron gas boiler Fuel: Natural gas/Diesel Condition: Fully operational Year of installation: 2023 Operating period: 2 heating seasons only Inspection and live test possible on site Suitable Applications: Hotels Hospitals Manufacturing facilities Administrative buildings Schools Greenhouses Logistics and industrial centers Additional Information: Automation and circulation pumps included Dismantling and transport can help with logistics Sale as a complete boiler room system Price EUR 58,000 EXW plus VAT Ijdpfx Aoy Tp Evjbyetk Contact G. Jordanov Location: Ruse,Bulgaria

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Itsdpfxjxfaqws Abysk Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately. Itsdpjzu R S Dsfx Abyok

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Itodpfx Absv Hn N Uoyek Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: refurbished (used), Year of construction: 2022, operating hours: 4,577 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary Itodpfoyhckmjx Abyjk 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler, ideal for residential buildings, small commercial premises or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation within a space-saving design. — Iedjwahhvspfx Abyotk Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating units, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Augers • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers and many more components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: You can find most of our current offers on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Viewing: Viewings can be arranged by appointment at our warehouse. If you are interested, please feel free to contact us – we look forward to helping you find the right solution.

Condition: excellent (used), Year of construction: 2014, operating hours: 3,000 h, functionality: fully functional, Year of manufacture: 2014, commissioning: 2017 OSP P300S control system Travel ranges: X1/X2-axis: 695/235 mm Isdpjxy I T Asfx Abyotk Y-axis: 300 mm Z1/Z2-axis: 1,600/1,461 mm B-axis: -30° to +210° Maximum turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, max. torque: 955 Nm, bore diameter: 112 mm SMW VNK320-127 hollow clamping cylinder, through bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 stations, HSK-A63 Lower turret with 12 tool stations Self-centering steady rest on lower turret Hydraulic steady rest SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP probe Drum chip conveyor TMF300 with 980 L tank 8 bar circulation pump 70 bar high-pressure pump Hinged belt chip conveyor Tool monitoring system for tool life and breakage Tool measuring device (with standard chuck) for safe setup MacMan machine management with integrated PDA (production data acquisition) Part program storage: 2 GB Max. length of individual part program: 2 MB 2x USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Harmonic speed oscillation via periodic speed variation Tool height offset in Y-axis for turning tools Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C Hi-Cut Pro high-speed control for rotating tools 10 workpiece zero points (coordinate system selection function) Coordinate transformation

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details:  Type: Twinshaft mixer (TWS 01)  Wet concrete capacity: 1 m3  Dimensions (length x width x height): 1700 x 2900 x 2000 mm  Feeding capacity: 1500 lt Isdpozar I Ssfx Abystk  Fresh concrete capacity: 1250 lt  Compacted concrete capacity: 1000 lt  Motor power: 2 x 18.5 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Mixer / Paddle mixer with twin shaft, CO2-cooled with vacuum and pump, equipped with a box lifter for pallet containers, capacity 4000 litres Mixer / Paddle mixer with twin shaft, vacuum-cooled, manufactured by Seydelmann, fitted with Oslos lifter for pallet boxes, Model PV 4000 Machine number: 11423-1 Year of manufacture: 2011 Voltage: 400 V, 50 Hz, 125 A Power: 60 kW Weight: 6500 kg Dimensions: 4250 mm x 2300 mm x 2750 mm. Lifter Brand: Oslos Ijdpfjwxmv Nex Abyetk Model: Column Loader 1000S Serial number: E0112707705119/9002 Year of manufacture: 09/2021 Voltage: 380 V, 3 Ph, 50 Hz, 5.2 A Power: 2.2 kW Lifting capacity: 1000 kg Lifter dimensions: 700 mm x 2600 mm x 4200 mm Lifting arm dimensions: 1750 mm x 1600 mm x 1250 mm

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. Itjdpfjy Abcljx Abyok L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf Isdpjy A Ewtofx Abyotk TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heating element, gas spring, and heater were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (inner diameter) Basket height: 140 mm (inner height) Max. usable height (wash load): 450 mm Max. batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is carried out using a special nozzle system with wide-angle nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation and high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level drops below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and accurate metering of the required amount of water. Internally located return baskets filter out coarse dirt from the washing solution. A fume extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Simple handling of the filling system enables a fast workflow. Loading via crane is possible. Price: Negotiable Our asking price is €2,200 net, ex works, plus packaging costs. Itodewzwfgepfx Abyok All technical specifications are subject to typographical errors and omissions. Sale is limited to EU countries only.

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Itjdsyl U Sqopfx Abyjk Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h Itjdpfx Abovhctwoyok - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, 🔥 For Sale: Fröling S3 15–31 kW Wood Gasification Boiler – Efficient and Affordable Wood Heating 🔥 The Fröling S3 is a well-balanced, high-efficiency wood gasification boiler with an output range of 15–31 kW – ideal for residential homes, smaller facilities, and agricultural buildings. It offers clean combustion, long burn times, and easy operation – all at an attractive price point. —— Main features: 🌳 Fuel: Split logs / Hardwood ⚡ Output: 15–31 kW 🧠 Wood gasification with optimized air management 🔧 Manual loading, spacious filling chamber 🇦🇹 Fröling – Austrian design focused on sustainability 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) —— 💼 Top Heating Systems – ProfiKazán Intelligent wood gasification systems for residential and commercial use. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Auger conveyors Iedpfjv Uw Ehox Abyetk • Discharge units • Burners • Pumps • Comprehensive range of heating accessories ⚙️ Accessories and components: We also stock a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – suitable for residential to industrial applications. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional units that are not yet listed. 📅 Viewing: A visit to our warehouse is possible by appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Year of construction: 1990, condition: used, Manufacturer : Clextral Model : BC 45 Year: 1990 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire DC motor: 21 kW Length of screw/barrel: 1500 mm Itjdpfx Abeyzt Udeysk Screw elements: nominal diameter 55 mm. L/D : 27 Included in the package: Granulator, water pump and control panel Peripheral equipment not included but available on request: Dosing unit. (Its integration may be subject to a feasibility study and a supplementary quotation.)